[v2,27/43] drm/sun4i: frontend: Add support for semi-planar YUV input formats
diff mbox series

Message ID 20181123092515.2511-28-paul.kocialkowski@bootlin.com
State New, archived
Headers show
Series
  • drm/sun4i: Support for linear and tiled YUV formats with the frontend
Related show

Commit Message

Paul Kocialkowski Nov. 23, 2018, 9:24 a.m. UTC
Semi-planar YUV formats use two distinct planes, one for luminance and
one for chrominance. To add support for them, we need to configure the
second line stride and buffer address registers to setup the second YUV
plane.

New definitions are introduced to configure the input format register
for the YUV420 and YUV422 semi-planar formats.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
 drivers/gpu/drm/sun4i/sun4i_frontend.c | 52 +++++++++++++++++++++++---
 drivers/gpu/drm/sun4i/sun4i_frontend.h |  6 +++
 drivers/gpu/drm/sun4i/sun4i_layer.c    |  4 ++
 3 files changed, 57 insertions(+), 5 deletions(-)

Comments

Maxime Ripard Nov. 27, 2018, 9 a.m. UTC | #1
On Fri, Nov 23, 2018 at 10:24:59AM +0100, Paul Kocialkowski wrote:
> Semi-planar YUV formats use two distinct planes, one for luminance and
> one for chrominance. To add support for them, we need to configure the
> second line stride and buffer address registers to setup the second YUV
> plane.
> 
> New definitions are introduced to configure the input format register
> for the YUV420 and YUV422 semi-planar formats.
> 
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> ---
>  drivers/gpu/drm/sun4i/sun4i_frontend.c | 52 +++++++++++++++++++++++---
>  drivers/gpu/drm/sun4i/sun4i_frontend.h |  6 +++
>  drivers/gpu/drm/sun4i/sun4i_layer.c    |  4 ++
>  3 files changed, 57 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
> index f443e8e1d8ec..e31438e5cabd 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_frontend.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
> @@ -118,11 +118,23 @@ void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
>  	regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD0_REG,
>  		     fb->pitches[0]);
>  
> +	if (fb->format->num_planes > 1)
> +		regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD1_REG,
> +			     fb->pitches[1]);
> +
>  	/* Set the physical address of the buffer in memory */
>  	paddr = drm_fb_cma_get_gem_addr(fb, state, 0);
>  	paddr -= PHYS_OFFSET;
> -	DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr);
> +	DRM_DEBUG_DRIVER("Setting buffer #0 address to %pad\n", &paddr);
>  	regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR0_REG, paddr);
> +
> +	if (fb->format->num_planes > 1) {
> +		paddr = drm_fb_cma_get_gem_addr(fb, state, 1);
> +		paddr -= PHYS_OFFSET;
> +		DRM_DEBUG_DRIVER("Setting buffer #1 address to %pad\n", &paddr);
> +		regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR1_REG,
> +			     paddr);
> +	}
>  }
>  EXPORT_SYMBOL(sun4i_frontend_update_buffer);
>  
> @@ -130,6 +142,8 @@ static int sun4i_frontend_drm_format_to_input_fmt(uint32_t fmt, u32 *val)
>  {
>  	if (!drm_format_is_yuv(fmt))
>  		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_RGB;
> +	else if (drm_format_is_yuv_sampling_420(fmt))
> +		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV420;
>  	else if (drm_format_is_yuv_sampling_422(fmt))
>  		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV422;
>  	else
> @@ -140,12 +154,20 @@ static int sun4i_frontend_drm_format_to_input_fmt(uint32_t fmt, u32 *val)
>  
>  static int sun4i_frontend_drm_format_to_input_mode(uint32_t fmt, u32 *val)
>  {
> -	if (drm_format_num_planes(fmt) == 1)
> +	int num_planes = drm_format_num_planes(fmt);
> +
> +	switch (num_planes) {
> +	case 1:

You seem to use either the helper or retrieve the structure field
directly to access the number of planes. I'm fine either way, but this
should be consistent.

Maxime

Patch
diff mbox series

diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
index f443e8e1d8ec..e31438e5cabd 100644
--- a/drivers/gpu/drm/sun4i/sun4i_frontend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
@@ -118,11 +118,23 @@  void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
 	regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD0_REG,
 		     fb->pitches[0]);
 
+	if (fb->format->num_planes > 1)
+		regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD1_REG,
+			     fb->pitches[1]);
+
 	/* Set the physical address of the buffer in memory */
 	paddr = drm_fb_cma_get_gem_addr(fb, state, 0);
 	paddr -= PHYS_OFFSET;
-	DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr);
+	DRM_DEBUG_DRIVER("Setting buffer #0 address to %pad\n", &paddr);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR0_REG, paddr);
+
+	if (fb->format->num_planes > 1) {
+		paddr = drm_fb_cma_get_gem_addr(fb, state, 1);
+		paddr -= PHYS_OFFSET;
+		DRM_DEBUG_DRIVER("Setting buffer #1 address to %pad\n", &paddr);
+		regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR1_REG,
+			     paddr);
+	}
 }
 EXPORT_SYMBOL(sun4i_frontend_update_buffer);
 
@@ -130,6 +142,8 @@  static int sun4i_frontend_drm_format_to_input_fmt(uint32_t fmt, u32 *val)
 {
 	if (!drm_format_is_yuv(fmt))
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_RGB;
+	else if (drm_format_is_yuv_sampling_420(fmt))
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV420;
 	else if (drm_format_is_yuv_sampling_422(fmt))
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV422;
 	else
@@ -140,12 +154,20 @@  static int sun4i_frontend_drm_format_to_input_fmt(uint32_t fmt, u32 *val)
 
 static int sun4i_frontend_drm_format_to_input_mode(uint32_t fmt, u32 *val)
 {
-	if (drm_format_num_planes(fmt) == 1)
+	int num_planes = drm_format_num_planes(fmt);
+
+	switch (num_planes) {
+	case 1:
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PACKED;
-	else
-		return -EINVAL;
+		return 0;
 
-	return 0;
+	case 2:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_SEMIPLANAR;
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
 }
 
 static int sun4i_frontend_drm_format_to_input_sequence(uint32_t fmt, u32 *val)
@@ -155,6 +177,22 @@  static int sun4i_frontend_drm_format_to_input_sequence(uint32_t fmt, u32 *val)
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_BGRX;
 		return 0;
 
+	case DRM_FORMAT_NV12:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV;
+		return 0;
+
+	case DRM_FORMAT_NV16:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV;
+		return 0;
+
+	case DRM_FORMAT_NV21:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU;
+		return 0;
+
+	case DRM_FORMAT_NV61:
+		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU;
+		return 0;
+
 	case DRM_FORMAT_UYVY:
 		*val = SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UYVY;
 		return 0;
@@ -198,6 +236,10 @@  static int sun4i_frontend_drm_format_to_output_fmt(uint32_t fmt, u32 *val)
 
 static const uint32_t sun4i_frontend_formats[] = {
 	DRM_FORMAT_BGRX8888,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV21,
+	DRM_FORMAT_NV61,
 	DRM_FORMAT_UYVY,
 	DRM_FORMAT_VYUY,
 	DRM_FORMAT_XRGB8888,
diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.h b/drivers/gpu/drm/sun4i/sun4i_frontend.h
index 399755939a28..7d01b4f09b75 100644
--- a/drivers/gpu/drm/sun4i/sun4i_frontend.h
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.h
@@ -22,17 +22,23 @@ 
 #define SUN4I_FRONTEND_BYPASS_CSC_EN			BIT(1)
 
 #define SUN4I_FRONTEND_BUF_ADDR0_REG		0x020
+#define SUN4I_FRONTEND_BUF_ADDR1_REG		0x024
 
 #define SUN4I_FRONTEND_LINESTRD0_REG		0x040
+#define SUN4I_FRONTEND_LINESTRD1_REG		0x044
 
 #define SUN4I_FRONTEND_INPUT_FMT_REG		0x04c
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_PACKED	(1 << 8)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD_SEMIPLANAR	(2 << 8)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV422	(1 << 4)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_YUV420	(2 << 4)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT_RGB		(5 << 4)
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UYVY		0
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YUYV		1
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VYUY		2
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_YVYU		3
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_UV		0
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_VU		1
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_BGRX		0
 #define SUN4I_FRONTEND_INPUT_FMT_DATA_PS_XRGB		1
 
diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.c b/drivers/gpu/drm/sun4i/sun4i_layer.c
index 6155eca6b1bd..80c718f06ce8 100644
--- a/drivers/gpu/drm/sun4i/sun4i_layer.c
+++ b/drivers/gpu/drm/sun4i/sun4i_layer.c
@@ -136,6 +136,10 @@  static const uint32_t sun4i_layer_formats[] = {
 	DRM_FORMAT_RGBA4444,
 	DRM_FORMAT_RGB888,
 	DRM_FORMAT_RGB565,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV21,
+	DRM_FORMAT_NV61,
 	DRM_FORMAT_UYVY,
 	DRM_FORMAT_VYUY,
 	DRM_FORMAT_XRGB8888,