| Message ID | 20181127034254.24721-6-weiyi.lu@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Mediatek MT8183 clock and scpsys support | expand |
On Tue, Nov 27, 2018 at 11:43 AM Weiyi Lu <weiyi.lu@mediatek.com> wrote: > > From: Owen Chen <owen.chen@mediatek.com> > > Both MT8183 & MT6765 add more bus protect node than previous project, > therefore we add two more register for setup bus protect, which reside > at INFRA_CFG & SMI_COMMON. > > With the following change > 1. bus protect need not only infracfg but smi_common registers involved > to setup. Therefore we add a set/clr APIs with more customize arguments. > > The second change is that we also add subsys CG control flow before/after > the bus protect/sram control, due to bus protect need SMI bus relative CGs > enable to feed-back its ack, and some master's sram control need CG enable > to on/off its resource sequentially. > > With the following change > 1. turn on subsys CG before sram pwron and release bus protect. > 2. turn off subsys CG after the process of set bus protect/receive > ack/disable sram. > > The last change is for some power domains like vpu_core on MT8183 whose > sram need to do clock and internal isolation while power on/off sram. > We add a flag "sram_iso_ctrl" in scp_domain_data to judge if we need to > do the extra sram isolation control or not. > > Signed-off-by: Owen Chen <owen.chen@mediatek.com> > Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> > Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> > --- > drivers/soc/mediatek/Makefile | 2 +- > drivers/soc/mediatek/mtk-scpsys-ext.c | 99 +++++++ > drivers/soc/mediatek/mtk-scpsys.c | 379 +++++++++++++++++++----- > include/linux/soc/mediatek/scpsys-ext.h | 39 +++ > 4 files changed, 448 insertions(+), 71 deletions(-) > create mode 100644 drivers/soc/mediatek/mtk-scpsys-ext.c > create mode 100644 include/linux/soc/mediatek/scpsys-ext.h > > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile > index 12998b08819e..9dc6670c19cb 100644 > --- a/drivers/soc/mediatek/Makefile > +++ b/drivers/soc/mediatek/Makefile > @@ -1,3 +1,3 @@ > -obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o > +obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o mtk-scpsys-ext.o > obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o > obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o > diff --git a/drivers/soc/mediatek/mtk-scpsys-ext.c b/drivers/soc/mediatek/mtk-scpsys-ext.c > new file mode 100644 > index 000000000000..54df42db2a8f > --- /dev/null > +++ b/drivers/soc/mediatek/mtk-scpsys-ext.c > @@ -0,0 +1,99 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2018 MediaTek Inc. > + * Author: Owen Chen <Owen.Chen@mediatek.com> > + */ > +#include <linux/ktime.h> > +#include <linux/mfd/syscon.h> > +#include <linux/of_device.h> > +#include <linux/regmap.h> > +#include <linux/soc/mediatek/scpsys-ext.h> > + > +#define MTK_POLL_DELAY_US 10 > +#define MTK_POLL_TIMEOUT (jiffies_to_usecs(HZ)) > + > +static int set_bus_protection(struct regmap *map, u32 mask, u32 ack_mask, > + u32 reg_set, u32 reg_sta, u32 reg_en) > +{ > + u32 val; > + > + if (reg_set) > + regmap_write(map, reg_set, mask); > + else > + regmap_update_bits(map, reg_en, mask, mask); > + > + return regmap_read_poll_timeout(map, reg_sta, > + val, (val & ack_mask) == ack_mask, > + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); > +} > + > +static int clear_bus_protection(struct regmap *map, u32 mask, u32 ack_mask, > + u32 reg_clr, u32 reg_sta, u32 reg_en) > +{ > + u32 val; > + > + if (reg_clr) > + regmap_write(map, reg_clr, mask); > + else > + regmap_update_bits(map, reg_en, mask, 0); > + > + return regmap_read_poll_timeout(map, reg_sta, > + val, !(val & ack_mask), > + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); > +} > + > +int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table, > + struct regmap *infracfg, struct regmap *smi_common) > +{ > + int i; > + > + for (i = 0; i < MAX_STEPS && bp_table[i].mask; i++) { > + struct regmap *map; > + int ret; > + > + if (bp_table[i].type == IFR_TYPE) > + map = infracfg; > + else if (bp_table[i].type == SMI_TYPE) > + map = smi_common; > + else > + return -EINVAL; > + > + ret = set_bus_protection(map, > + bp_table[i].mask, bp_table[i].mask, > + bp_table[i].set_ofs, bp_table[i].sta_ofs, > + bp_table[i].en_ofs); > + > + if (ret) > + return ret; > + } > + > + return 0; > +} > + > +int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table, > + struct regmap *infracfg, struct regmap *smi_common) > +{ > + int i; > + > + for (i = MAX_STEPS - 1; i >= 0; i--) { > + struct regmap *map; > + int ret; > + > + if (bp_table[i].type == IFR_TYPE) > + map = infracfg; > + else if (bp_table[i].type == SMI_TYPE) > + map = smi_common; > + else > + return -EINVAL; > + > + ret = clear_bus_protection(map, > + bp_table[i].mask, bp_table[i].clr_ack_mask, > + bp_table[i].clr_ofs, bp_table[i].sta_ofs, > + bp_table[i].en_ofs); > + > + if (ret) > + return ret; > + } > + > + return 0; > +} > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c > index 5b24bb4bfbf6..80be2e05e4e0 100644 > --- a/drivers/soc/mediatek/mtk-scpsys.c > +++ b/drivers/soc/mediatek/mtk-scpsys.c > @@ -1,3 +1,4 @@ > +// SPDX-License-Identifier: GPL-2.0 If you add the SPDX header, should you remove the licence boilerplate below? > /* > * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de> > * > @@ -20,6 +21,7 @@ > #include <linux/pm_domain.h> > #include <linux/regulator/consumer.h> > #include <linux/soc/mediatek/infracfg.h> > +#include <linux/soc/mediatek/scpsys-ext.h> > > #include <dt-bindings/power/mt2701-power.h> > #include <dt-bindings/power/mt2712-power.h> > @@ -64,6 +66,8 @@ > #define PWR_ON_BIT BIT(2) > #define PWR_ON_2ND_BIT BIT(3) > #define PWR_CLK_DIS_BIT BIT(4) > +#define PWR_SRAM_CLKISO_BIT BIT(5) > +#define PWR_SRAM_ISOINT_B_BIT BIT(6) > > #define PWR_STATUS_CONN BIT(1) > #define PWR_STATUS_DISP BIT(3) > @@ -115,16 +119,38 @@ static const char * const clk_names[] = { > }; > > #define MAX_CLKS 3 > - > +#define MAX_SUBSYS_CLKS 10 > + > +/** > + * struct scp_domain_data - scp domain data for power on/off flow > + * @name: The domain name. > + * @sta_mask: The mask for power on/off status bit. > + * @ctl_offs: The offset for main power control register. > + * @sram_pdn_bits: The mask for sram power control bits. > + * @sram_pdn_ack_bits: The mask for sram power control acked bits. > + * @bus_prot_mask: The mask for single step bus protection. > + * @clk_id: The basic clock needs to be enabled before enabling certain > + * power domains. > + * @basic_clk_name: provide the same purpose with field "clk_id" > + * by declaring basic clock prefix name rathan than clk_id. *rather > + * @subsys_clk_prefix: The prefix name of the clocks need to be enabled > + * before releasing bus protection. > + * @caps: The flag for active wake-up action. > + * @bp_table: The mask table for multiple step bus protection. > + */ > struct scp_domain_data { > const char *name; > u32 sta_mask; > int ctl_offs; > + bool sram_iso_ctrl; > u32 sram_pdn_bits; > u32 sram_pdn_ack_bits; > u32 bus_prot_mask; > enum clk_id clk_id[MAX_CLKS]; > + const char *basic_clk_name[MAX_CLKS]; > + const char *subsys_clk_prefix; > u8 caps; > + struct bus_prot bp_table[MAX_STEPS]; > }; > > struct scp; > @@ -133,6 +159,7 @@ struct scp_domain { > struct generic_pm_domain genpd; > struct scp *scp; > struct clk *clk[MAX_CLKS]; > + struct clk *subsys_clk[MAX_SUBSYS_CLKS]; > const struct scp_domain_data *data; > struct regulator *supply; > }; > @@ -148,6 +175,7 @@ struct scp { > struct device *dev; > void __iomem *base; > struct regmap *infracfg; > + struct regmap *smi_common; > struct scp_ctrl_reg ctrl_reg; > bool bus_prot_reg_update; > }; > @@ -188,20 +216,26 @@ static int scpsys_domain_is_on(struct scp_domain *scpd) > return -EINVAL; > } > > -static int scpsys_power_on(struct generic_pm_domain *genpd) > +static int scpsys_regulator_onoff(struct scp_domain *scpd, bool on) This function is so simple that I'm not sure why it was added. Wouldn't be generally simpler to just call regulator_enable/disable(scpd->supply) in the code below? (as was done before this refactoring) > { > - struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd); > - struct scp *scp = scpd->scp; > - void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; > - u32 pdn_ack = scpd->data->sram_pdn_ack_bits; > - u32 val; > - int ret, tmp; > + struct regulator *s = scpd->supply; > + > + if (!s) > + return 0; > + > + return on ? regulator_enable(s) : regulator_disable(s); > +} > + > +static int scpsys_basic_clk_onoff(struct scp_domain *scpd, bool on) I don't find this pattern particularly nice: int func_onoff(bool on) { if (on) enable(); else disable(); } Especially give that you always call func_onoff with either hard-coded true or false parameter. I think 2 sets of functions (func_enable and func_disable) is probably better in this case. > +{ > + int ret = 0; > int i; > > - if (scpd->supply) { > - ret = regulator_enable(scpd->supply); > - if (ret) > - return ret; > + if (!on) { > + for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) > + clk_disable_unprepare(scpd->clk[i]); > + > + return ret; > } > > for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) { > @@ -210,10 +244,147 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) > for (--i; i >= 0; i--) > clk_disable_unprepare(scpd->clk[i]); > > - goto err_clk; > + break; > } > } > > + return ret; > +} > + > +static int scpsys_sram_onoff(struct scp_domain *scpd, void __iomem *ctl_addr, > + bool on) This one is a little more borderline, but IMHO enable/disable would still be more readable. > +{ > + u32 val, ack; > + int tmp; > + int ret = 0; > + u32 pdn_ack = scpd->data->sram_pdn_ack_bits; > + > + if (!on && scpd->data->sram_iso_ctrl) { > + val = readl(ctl_addr); > + val |= PWR_SRAM_CLKISO_BIT; > + writel(val, ctl_addr); > + val &= ~PWR_SRAM_ISOINT_B_BIT; > + writel(val, ctl_addr); > + udelay(1); > + } > + > + val = readl(ctl_addr); > + if (on) { > + val &= ~scpd->data->sram_pdn_bits; > + ack = 0; > + } else { > + val |= scpd->data->sram_pdn_bits; > + ack = pdn_ack; > + } > + writel(val, ctl_addr); > + > + /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ > + if (on && MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) { > + /* > + * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for > + * MT7622_POWER_DOMAIN_WB and thus just a trivial setup > + * is applied here. > + */ > + usleep_range(12000, 12100); > + } else > + /* Either wait until SRAM_PDN_ACK all 1 or 0 */ > + ret = readl_poll_timeout(ctl_addr, tmp, > + (tmp & pdn_ack) == ack, > + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); > + > + if (on && scpd->data->sram_iso_ctrl) { > + val = readl(ctl_addr); > + val |= PWR_SRAM_ISOINT_B_BIT; > + writel(val, ctl_addr); > + udelay(1); > + val &= ~PWR_SRAM_CLKISO_BIT; > + writel(val, ctl_addr); > + } > + > + return ret; > +} > + > +static int scpsys_subsys_clk_onoff(struct scp_domain *scpd, bool on) enable/disable for this one. > +{ > + int ret = 0; > + int i; > + > + if (!on) { > + for (i = MAX_SUBSYS_CLKS - 1; i >= 0; i--) { > + struct clk *clk = scpd->subsys_clk[i]; > + > + if (clk) > + clk_disable_unprepare(clk); > + } > + > + return ret; > + } > + > + for (i = 0; i < MAX_SUBSYS_CLKS && scpd->subsys_clk[i]; i++) { > + struct clk *clk = scpd->subsys_clk[i]; > + > + ret = clk_prepare_enable(clk); > + if (ret) { > + for (--i; i >= 0; i--) { > + struct clk *clk = scpd->subsys_clk[i]; > + > + clk_disable_unprepare(clk); > + } > + > + break; > + } > + } > + > + return ret; > +} > + > +static int scpsys_bus_protect_onoff(struct scp_domain *scpd, bool on) I'd also do an enable/disable pair of function, that could look very simple: ... { ... if (scpd->data->bus_prot_mask) return mtk_infracfg_set_bus_protection(scp->infracfg, scpd->data->bus_prot_mask, scp->bus_prot_reg_update); else return mtk_scpsys_ext_set_bus_protection( scpd->data->bp_table, scp->infracfg, scp->smi_common); return 0; } > +{ > + struct scp *scp = scpd->scp; > + int ret = 0; > + > + if (scpd->data->bus_prot_mask) { > + if (on) > + ret = mtk_infracfg_set_bus_protection(scp->infracfg, > + scpd->data->bus_prot_mask, > + scp->bus_prot_reg_update); > + else > + ret = mtk_infracfg_clear_bus_protection(scp->infracfg, > + scpd->data->bus_prot_mask, > + scp->bus_prot_reg_update); > + } else if (scpd->data->bp_table[0].mask) { > + if (on) > + ret = mtk_scpsys_ext_set_bus_protection( > + scpd->data->bp_table, > + scp->infracfg, > + scp->smi_common); > + else > + ret = mtk_scpsys_ext_clear_bus_protection( > + scpd->data->bp_table, > + scp->infracfg, > + scp->smi_common); > + } > + > + return ret; > +} > + > +static int scpsys_power_on(struct generic_pm_domain *genpd) > +{ > + struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd); > + struct scp *scp = scpd->scp; > + void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; > + u32 val; > + int ret, tmp; > + > + ret = scpsys_regulator_onoff(scpd, true); > + if (ret < 0) > + return ret; > + > + ret = scpsys_basic_clk_onoff(scpd, true); > + if (ret) > + goto err_clk; > + > + /* subsys power on */ > val = readl(ctl_addr); > val |= PWR_ON_BIT; > writel(val, ctl_addr); > @@ -226,6 +397,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) > if (ret < 0) > goto err_pwr_ack; > > + This extra blank line still needs to be removed. > val &= ~PWR_CLK_DIS_BIT; > writel(val, ctl_addr); > > @@ -235,43 +407,26 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) > val |= PWR_RST_B_BIT; > writel(val, ctl_addr); > > - val &= ~scpd->data->sram_pdn_bits; > - writel(val, ctl_addr); > - > - /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ > - if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) { > - /* > - * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for > - * MT7622_POWER_DOMAIN_WB and thus just a trivial setup is > - * applied here. > - */ > - usleep_range(12000, 12100); > + ret = scpsys_subsys_clk_onoff(scpd, true); > + if (ret < 0) > + goto err_pwr_ack; > > - } else { > - ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0, > - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); > - if (ret < 0) > - goto err_pwr_ack; > - } > + ret = scpsys_sram_onoff(scpd, ctl_addr, true); > + if (ret < 0) > + goto err_sram; > > - if (scpd->data->bus_prot_mask) { > - ret = mtk_infracfg_clear_bus_protection(scp->infracfg, > - scpd->data->bus_prot_mask, > - scp->bus_prot_reg_update); > - if (ret) > - goto err_pwr_ack; > - } > + ret = scpsys_bus_protect_onoff(scpd, false); > + if (ret < 0) > + goto err_sram; > > return 0; > > +err_sram: > + scpsys_subsys_clk_onoff(scpd, false); > err_pwr_ack: > - for (i = MAX_CLKS - 1; i >= 0; i--) { > - if (scpd->clk[i]) > - clk_disable_unprepare(scpd->clk[i]); > - } > + scpsys_basic_clk_onoff(scpd, false); > err_clk: > - if (scpd->supply) > - regulator_disable(scpd->supply); > + scpsys_regulator_onoff(scpd, false); > > dev_err(scp->dev, "Failed to power on domain %s\n", genpd->name); > > @@ -283,29 +438,21 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) > struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd); > struct scp *scp = scpd->scp; > void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; > - u32 pdn_ack = scpd->data->sram_pdn_ack_bits; > u32 val; > int ret, tmp; > - int i; > > - if (scpd->data->bus_prot_mask) { > - ret = mtk_infracfg_set_bus_protection(scp->infracfg, > - scpd->data->bus_prot_mask, > - scp->bus_prot_reg_update); > - if (ret) > - goto out; > - } > - > - val = readl(ctl_addr); > - val |= scpd->data->sram_pdn_bits; > - writel(val, ctl_addr); > + ret = scpsys_bus_protect_onoff(scpd, true); > + if (ret < 0) > + goto out; > > - /* wait until SRAM_PDN_ACK all 1 */ > - ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack, > - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); > + ret = scpsys_sram_onoff(scpd, ctl_addr, false); > if (ret < 0) > goto out; > > + ret = scpsys_subsys_clk_onoff(scpd, false); > + > + /* subsys power off */ > + val = readl(ctl_addr); > val |= PWR_ISO_BIT; > writel(val, ctl_addr); > > @@ -327,11 +474,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) > if (ret < 0) > goto out; > > - for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) > - clk_disable_unprepare(scpd->clk[i]); > + scpsys_basic_clk_onoff(scpd, false); > > - if (scpd->supply) > - regulator_disable(scpd->supply); > + scpsys_regulator_onoff(scpd, false); > > return 0; > > @@ -341,6 +486,69 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) > return ret; > } > > +static int init_subsys_clks(struct platform_device *pdev, > + const char *prefix, struct clk **clk) > +{ > + struct device_node *node = pdev->dev.of_node; > + u32 sub_clk_cnt = 0; > + u32 prefix_len = 0; > + int str_sz = 0; These last 2 don't need to be initialized to 0. > + int clk_idx; > + int ret = 0; No need to initialize to 0. > + > + if (!node) { > + dev_err(&pdev->dev, "Cannot find scpsys node: %ld\n", > + PTR_ERR(node)); > + return PTR_ERR(node); > + } > + > + str_sz = of_property_count_strings(node, "clock-names"); > + if (str_sz < 0) { > + dev_err(&pdev->dev, "Cannot get any subsys strings: %d\n", > + str_sz); > + return str_sz; > + } > + > + prefix_len = strlen(prefix); > + > + for (clk_idx = 0; clk_idx < str_sz; clk_idx++) { > + const char *clk_name; > + > + ret = of_property_read_string_index(node, "clock-names", > + clk_idx, &clk_name); > + if (ret < 0) { > + dev_err(&pdev->dev, > + "Cannot read subsys string[%d]: %d\n", > + clk_idx, ret); > + return ret; > + } > + > + if (!strncmp(clk_name, prefix, prefix_len) > + && (strchr(clk_name + prefix_len, '-') Shouldn't this just be clk_name[prefix_len] == '-' ? At least that's how it seems to work right now ("mm" matches "mm-0", "mm-1", etc.) Also, I'm wondering if this prefix matching approach is best, but I'll let other people comment. > + != NULL)) { > + if (sub_clk_cnt >= MAX_SUBSYS_CLKS) { > + dev_err(&pdev->dev, > + "subsys clk out of range %d\n", > + sub_clk_cnt); > + return -ENOMEM; > + } > + > + clk[sub_clk_cnt] = devm_clk_get( > + &pdev->dev, clk_name); > + > + if (IS_ERR(clk)) { > + dev_err(&pdev->dev, > + "Subsys clk read fail %ld\n", > + PTR_ERR(clk)); > + return PTR_ERR(clk); > + } > + sub_clk_cnt++; > + } > + } > + > + return sub_clk_cnt; > +} > + > static void init_clks(struct platform_device *pdev, struct clk **clk) > { > int i; > @@ -396,6 +604,17 @@ static struct scp *init_scp(struct platform_device *pdev, > return ERR_CAST(scp->infracfg); > } > > + scp->smi_common = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, > + "smi_comm"); > + > + if (scp->smi_common == ERR_PTR(-ENODEV)) { > + scp->smi_common = NULL; > + } else if (IS_ERR(scp->smi_common)) { > + dev_err(&pdev->dev, "Cannot find smi_common controller: %ld\n", > + PTR_ERR(scp->smi_common)); > + return ERR_CAST(scp->smi_common); > + } > + > for (i = 0; i < num; i++) { > struct scp_domain *scpd = &scp->domains[i]; > const struct scp_domain_data *data = &scp_domain_data[i]; > @@ -417,22 +636,42 @@ static struct scp *init_scp(struct platform_device *pdev, > struct scp_domain *scpd = &scp->domains[i]; > struct generic_pm_domain *genpd = &scpd->genpd; > const struct scp_domain_data *data = &scp_domain_data[i]; > + int clk_cnt = 0; No need to init to 0. > > pd_data->domains[i] = genpd; > scpd->scp = scp; > > scpd->data = data; > > - for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) { > - struct clk *c = clk[data->clk_id[j]]; > + if (data->clk_id[0]) > + for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) { > + struct clk *c = clk[data->clk_id[j]]; > + > + if (IS_ERR(c)) { > + dev_err(&pdev->dev, > + "%s: clk unavailable\n", > + data->name); > + return ERR_CAST(c); > + } > > - if (IS_ERR(c)) { > - dev_err(&pdev->dev, "%s: clk unavailable\n", > + scpd->clk[j] = c; > + } > + else if (data->basic_clk_name[0]) Please use brackets {} here, makes the code clearer (even though technically there is only one statement below). > + for (j = 0; j < MAX_CLKS > + && data->basic_clk_name[j]; j++) > + scpd->clk[j] = devm_clk_get(&pdev->dev, > + data->basic_clk_name[j]); > + > + if (data->subsys_clk_prefix) { > + clk_cnt = init_subsys_clks(pdev, > + data->subsys_clk_prefix, > + scpd->subsys_clk); > + if (clk_cnt < 0) { > + dev_err(&pdev->dev, > + "%s: subsys clk unavailable\n", > data->name); > - return ERR_CAST(c); > + return ERR_PTR(clk_cnt); > } > - > - scpd->clk[j] = c; > } > > genpd->name = data->name; > diff --git a/include/linux/soc/mediatek/scpsys-ext.h b/include/linux/soc/mediatek/scpsys-ext.h > new file mode 100644 > index 000000000000..d0ed295c88a7 > --- /dev/null > +++ b/include/linux/soc/mediatek/scpsys-ext.h > @@ -0,0 +1,39 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#ifndef __SOC_MEDIATEK_SCPSYS_EXT_H > +#define __SOC_MEDIATEK_SCPSYS_EXT_H > + > +#define MAX_STEPS 4 > + > +#define BUS_PROT(_type, _set_ofs, _clr_ofs, \ > + _en_ofs, _sta_ofs, _mask, _clr_ack_mask) { \ > + .type = _type, \ > + .set_ofs = _set_ofs, \ > + .clr_ofs = _clr_ofs, \ > + .en_ofs = _en_ofs, \ > + .sta_ofs = _sta_ofs, \ > + .mask = _mask, \ > + .clr_ack_mask = _clr_ack_mask, \ > + } > + > +enum regmap_type { > + IFR_TYPE, > + SMI_TYPE, > + MAX_REGMAP_TYPE, > +}; > + > +struct bus_prot { > + enum regmap_type type; > + u32 set_ofs; > + u32 clr_ofs; > + u32 en_ofs; > + u32 sta_ofs; > + u32 mask; > + u32 clr_ack_mask; > +}; > + > +int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table, > + struct regmap *infracfg, struct regmap *smi_common); > +int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table, > + struct regmap *infracfg, struct regmap *smi_common); > + > +#endif /* __SOC_MEDIATEK_SCPSYS_EXT_H */ > -- > 2.18.0 >
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile index 12998b08819e..9dc6670c19cb 100644 --- a/drivers/soc/mediatek/Makefile +++ b/drivers/soc/mediatek/Makefile @@ -1,3 +1,3 @@ -obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o +obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o mtk-scpsys-ext.o obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o diff --git a/drivers/soc/mediatek/mtk-scpsys-ext.c b/drivers/soc/mediatek/mtk-scpsys-ext.c new file mode 100644 index 000000000000..54df42db2a8f --- /dev/null +++ b/drivers/soc/mediatek/mtk-scpsys-ext.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Owen Chen <Owen.Chen@mediatek.com> + */ +#include <linux/ktime.h> +#include <linux/mfd/syscon.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/soc/mediatek/scpsys-ext.h> + +#define MTK_POLL_DELAY_US 10 +#define MTK_POLL_TIMEOUT (jiffies_to_usecs(HZ)) + +static int set_bus_protection(struct regmap *map, u32 mask, u32 ack_mask, + u32 reg_set, u32 reg_sta, u32 reg_en) +{ + u32 val; + + if (reg_set) + regmap_write(map, reg_set, mask); + else + regmap_update_bits(map, reg_en, mask, mask); + + return regmap_read_poll_timeout(map, reg_sta, + val, (val & ack_mask) == ack_mask, + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); +} + +static int clear_bus_protection(struct regmap *map, u32 mask, u32 ack_mask, + u32 reg_clr, u32 reg_sta, u32 reg_en) +{ + u32 val; + + if (reg_clr) + regmap_write(map, reg_clr, mask); + else + regmap_update_bits(map, reg_en, mask, 0); + + return regmap_read_poll_timeout(map, reg_sta, + val, !(val & ack_mask), + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); +} + +int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table, + struct regmap *infracfg, struct regmap *smi_common) +{ + int i; + + for (i = 0; i < MAX_STEPS && bp_table[i].mask; i++) { + struct regmap *map; + int ret; + + if (bp_table[i].type == IFR_TYPE) + map = infracfg; + else if (bp_table[i].type == SMI_TYPE) + map = smi_common; + else + return -EINVAL; + + ret = set_bus_protection(map, + bp_table[i].mask, bp_table[i].mask, + bp_table[i].set_ofs, bp_table[i].sta_ofs, + bp_table[i].en_ofs); + + if (ret) + return ret; + } + + return 0; +} + +int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table, + struct regmap *infracfg, struct regmap *smi_common) +{ + int i; + + for (i = MAX_STEPS - 1; i >= 0; i--) { + struct regmap *map; + int ret; + + if (bp_table[i].type == IFR_TYPE) + map = infracfg; + else if (bp_table[i].type == SMI_TYPE) + map = smi_common; + else + return -EINVAL; + + ret = clear_bus_protection(map, + bp_table[i].mask, bp_table[i].clr_ack_mask, + bp_table[i].clr_ofs, bp_table[i].sta_ofs, + bp_table[i].en_ofs); + + if (ret) + return ret; + } + + return 0; +} diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c index 5b24bb4bfbf6..80be2e05e4e0 100644 --- a/drivers/soc/mediatek/mtk-scpsys.c +++ b/drivers/soc/mediatek/mtk-scpsys.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de> * @@ -20,6 +21,7 @@ #include <linux/pm_domain.h> #include <linux/regulator/consumer.h> #include <linux/soc/mediatek/infracfg.h> +#include <linux/soc/mediatek/scpsys-ext.h> #include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/power/mt2712-power.h> @@ -64,6 +66,8 @@ #define PWR_ON_BIT BIT(2) #define PWR_ON_2ND_BIT BIT(3) #define PWR_CLK_DIS_BIT BIT(4) +#define PWR_SRAM_CLKISO_BIT BIT(5) +#define PWR_SRAM_ISOINT_B_BIT BIT(6) #define PWR_STATUS_CONN BIT(1) #define PWR_STATUS_DISP BIT(3) @@ -115,16 +119,38 @@ static const char * const clk_names[] = { }; #define MAX_CLKS 3 - +#define MAX_SUBSYS_CLKS 10 + +/** + * struct scp_domain_data - scp domain data for power on/off flow + * @name: The domain name. + * @sta_mask: The mask for power on/off status bit. + * @ctl_offs: The offset for main power control register. + * @sram_pdn_bits: The mask for sram power control bits. + * @sram_pdn_ack_bits: The mask for sram power control acked bits. + * @bus_prot_mask: The mask for single step bus protection. + * @clk_id: The basic clock needs to be enabled before enabling certain + * power domains. + * @basic_clk_name: provide the same purpose with field "clk_id" + * by declaring basic clock prefix name rathan than clk_id. + * @subsys_clk_prefix: The prefix name of the clocks need to be enabled + * before releasing bus protection. + * @caps: The flag for active wake-up action. + * @bp_table: The mask table for multiple step bus protection. + */ struct scp_domain_data { const char *name; u32 sta_mask; int ctl_offs; + bool sram_iso_ctrl; u32 sram_pdn_bits; u32 sram_pdn_ack_bits; u32 bus_prot_mask; enum clk_id clk_id[MAX_CLKS]; + const char *basic_clk_name[MAX_CLKS]; + const char *subsys_clk_prefix; u8 caps; + struct bus_prot bp_table[MAX_STEPS]; }; struct scp; @@ -133,6 +159,7 @@ struct scp_domain { struct generic_pm_domain genpd; struct scp *scp; struct clk *clk[MAX_CLKS]; + struct clk *subsys_clk[MAX_SUBSYS_CLKS]; const struct scp_domain_data *data; struct regulator *supply; }; @@ -148,6 +175,7 @@ struct scp { struct device *dev; void __iomem *base; struct regmap *infracfg; + struct regmap *smi_common; struct scp_ctrl_reg ctrl_reg; bool bus_prot_reg_update; }; @@ -188,20 +216,26 @@ static int scpsys_domain_is_on(struct scp_domain *scpd) return -EINVAL; } -static int scpsys_power_on(struct generic_pm_domain *genpd) +static int scpsys_regulator_onoff(struct scp_domain *scpd, bool on) { - struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd); - struct scp *scp = scpd->scp; - void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; - u32 pdn_ack = scpd->data->sram_pdn_ack_bits; - u32 val; - int ret, tmp; + struct regulator *s = scpd->supply; + + if (!s) + return 0; + + return on ? regulator_enable(s) : regulator_disable(s); +} + +static int scpsys_basic_clk_onoff(struct scp_domain *scpd, bool on) +{ + int ret = 0; int i; - if (scpd->supply) { - ret = regulator_enable(scpd->supply); - if (ret) - return ret; + if (!on) { + for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) + clk_disable_unprepare(scpd->clk[i]); + + return ret; } for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) { @@ -210,10 +244,147 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) for (--i; i >= 0; i--) clk_disable_unprepare(scpd->clk[i]); - goto err_clk; + break; } } + return ret; +} + +static int scpsys_sram_onoff(struct scp_domain *scpd, void __iomem *ctl_addr, + bool on) +{ + u32 val, ack; + int tmp; + int ret = 0; + u32 pdn_ack = scpd->data->sram_pdn_ack_bits; + + if (!on && scpd->data->sram_iso_ctrl) { + val = readl(ctl_addr); + val |= PWR_SRAM_CLKISO_BIT; + writel(val, ctl_addr); + val &= ~PWR_SRAM_ISOINT_B_BIT; + writel(val, ctl_addr); + udelay(1); + } + + val = readl(ctl_addr); + if (on) { + val &= ~scpd->data->sram_pdn_bits; + ack = 0; + } else { + val |= scpd->data->sram_pdn_bits; + ack = pdn_ack; + } + writel(val, ctl_addr); + + /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ + if (on && MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) { + /* + * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for + * MT7622_POWER_DOMAIN_WB and thus just a trivial setup + * is applied here. + */ + usleep_range(12000, 12100); + } else + /* Either wait until SRAM_PDN_ACK all 1 or 0 */ + ret = readl_poll_timeout(ctl_addr, tmp, + (tmp & pdn_ack) == ack, + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); + + if (on && scpd->data->sram_iso_ctrl) { + val = readl(ctl_addr); + val |= PWR_SRAM_ISOINT_B_BIT; + writel(val, ctl_addr); + udelay(1); + val &= ~PWR_SRAM_CLKISO_BIT; + writel(val, ctl_addr); + } + + return ret; +} + +static int scpsys_subsys_clk_onoff(struct scp_domain *scpd, bool on) +{ + int ret = 0; + int i; + + if (!on) { + for (i = MAX_SUBSYS_CLKS - 1; i >= 0; i--) { + struct clk *clk = scpd->subsys_clk[i]; + + if (clk) + clk_disable_unprepare(clk); + } + + return ret; + } + + for (i = 0; i < MAX_SUBSYS_CLKS && scpd->subsys_clk[i]; i++) { + struct clk *clk = scpd->subsys_clk[i]; + + ret = clk_prepare_enable(clk); + if (ret) { + for (--i; i >= 0; i--) { + struct clk *clk = scpd->subsys_clk[i]; + + clk_disable_unprepare(clk); + } + + break; + } + } + + return ret; +} + +static int scpsys_bus_protect_onoff(struct scp_domain *scpd, bool on) +{ + struct scp *scp = scpd->scp; + int ret = 0; + + if (scpd->data->bus_prot_mask) { + if (on) + ret = mtk_infracfg_set_bus_protection(scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); + else + ret = mtk_infracfg_clear_bus_protection(scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); + } else if (scpd->data->bp_table[0].mask) { + if (on) + ret = mtk_scpsys_ext_set_bus_protection( + scpd->data->bp_table, + scp->infracfg, + scp->smi_common); + else + ret = mtk_scpsys_ext_clear_bus_protection( + scpd->data->bp_table, + scp->infracfg, + scp->smi_common); + } + + return ret; +} + +static int scpsys_power_on(struct generic_pm_domain *genpd) +{ + struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd); + struct scp *scp = scpd->scp; + void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; + u32 val; + int ret, tmp; + + ret = scpsys_regulator_onoff(scpd, true); + if (ret < 0) + return ret; + + ret = scpsys_basic_clk_onoff(scpd, true); + if (ret) + goto err_clk; + + /* subsys power on */ val = readl(ctl_addr); val |= PWR_ON_BIT; writel(val, ctl_addr); @@ -226,6 +397,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) if (ret < 0) goto err_pwr_ack; + val &= ~PWR_CLK_DIS_BIT; writel(val, ctl_addr); @@ -235,43 +407,26 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) val |= PWR_RST_B_BIT; writel(val, ctl_addr); - val &= ~scpd->data->sram_pdn_bits; - writel(val, ctl_addr); - - /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ - if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) { - /* - * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for - * MT7622_POWER_DOMAIN_WB and thus just a trivial setup is - * applied here. - */ - usleep_range(12000, 12100); + ret = scpsys_subsys_clk_onoff(scpd, true); + if (ret < 0) + goto err_pwr_ack; - } else { - ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0, - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); - if (ret < 0) - goto err_pwr_ack; - } + ret = scpsys_sram_onoff(scpd, ctl_addr, true); + if (ret < 0) + goto err_sram; - if (scpd->data->bus_prot_mask) { - ret = mtk_infracfg_clear_bus_protection(scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); - if (ret) - goto err_pwr_ack; - } + ret = scpsys_bus_protect_onoff(scpd, false); + if (ret < 0) + goto err_sram; return 0; +err_sram: + scpsys_subsys_clk_onoff(scpd, false); err_pwr_ack: - for (i = MAX_CLKS - 1; i >= 0; i--) { - if (scpd->clk[i]) - clk_disable_unprepare(scpd->clk[i]); - } + scpsys_basic_clk_onoff(scpd, false); err_clk: - if (scpd->supply) - regulator_disable(scpd->supply); + scpsys_regulator_onoff(scpd, false); dev_err(scp->dev, "Failed to power on domain %s\n", genpd->name); @@ -283,29 +438,21 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd); struct scp *scp = scpd->scp; void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; - u32 pdn_ack = scpd->data->sram_pdn_ack_bits; u32 val; int ret, tmp; - int i; - if (scpd->data->bus_prot_mask) { - ret = mtk_infracfg_set_bus_protection(scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); - if (ret) - goto out; - } - - val = readl(ctl_addr); - val |= scpd->data->sram_pdn_bits; - writel(val, ctl_addr); + ret = scpsys_bus_protect_onoff(scpd, true); + if (ret < 0) + goto out; - /* wait until SRAM_PDN_ACK all 1 */ - ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack, - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); + ret = scpsys_sram_onoff(scpd, ctl_addr, false); if (ret < 0) goto out; + ret = scpsys_subsys_clk_onoff(scpd, false); + + /* subsys power off */ + val = readl(ctl_addr); val |= PWR_ISO_BIT; writel(val, ctl_addr); @@ -327,11 +474,9 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) if (ret < 0) goto out; - for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) - clk_disable_unprepare(scpd->clk[i]); + scpsys_basic_clk_onoff(scpd, false); - if (scpd->supply) - regulator_disable(scpd->supply); + scpsys_regulator_onoff(scpd, false); return 0; @@ -341,6 +486,69 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) return ret; } +static int init_subsys_clks(struct platform_device *pdev, + const char *prefix, struct clk **clk) +{ + struct device_node *node = pdev->dev.of_node; + u32 sub_clk_cnt = 0; + u32 prefix_len = 0; + int str_sz = 0; + int clk_idx; + int ret = 0; + + if (!node) { + dev_err(&pdev->dev, "Cannot find scpsys node: %ld\n", + PTR_ERR(node)); + return PTR_ERR(node); + } + + str_sz = of_property_count_strings(node, "clock-names"); + if (str_sz < 0) { + dev_err(&pdev->dev, "Cannot get any subsys strings: %d\n", + str_sz); + return str_sz; + } + + prefix_len = strlen(prefix); + + for (clk_idx = 0; clk_idx < str_sz; clk_idx++) { + const char *clk_name; + + ret = of_property_read_string_index(node, "clock-names", + clk_idx, &clk_name); + if (ret < 0) { + dev_err(&pdev->dev, + "Cannot read subsys string[%d]: %d\n", + clk_idx, ret); + return ret; + } + + if (!strncmp(clk_name, prefix, prefix_len) + && (strchr(clk_name + prefix_len, '-') + != NULL)) { + if (sub_clk_cnt >= MAX_SUBSYS_CLKS) { + dev_err(&pdev->dev, + "subsys clk out of range %d\n", + sub_clk_cnt); + return -ENOMEM; + } + + clk[sub_clk_cnt] = devm_clk_get( + &pdev->dev, clk_name); + + if (IS_ERR(clk)) { + dev_err(&pdev->dev, + "Subsys clk read fail %ld\n", + PTR_ERR(clk)); + return PTR_ERR(clk); + } + sub_clk_cnt++; + } + } + + return sub_clk_cnt; +} + static void init_clks(struct platform_device *pdev, struct clk **clk) { int i; @@ -396,6 +604,17 @@ static struct scp *init_scp(struct platform_device *pdev, return ERR_CAST(scp->infracfg); } + scp->smi_common = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "smi_comm"); + + if (scp->smi_common == ERR_PTR(-ENODEV)) { + scp->smi_common = NULL; + } else if (IS_ERR(scp->smi_common)) { + dev_err(&pdev->dev, "Cannot find smi_common controller: %ld\n", + PTR_ERR(scp->smi_common)); + return ERR_CAST(scp->smi_common); + } + for (i = 0; i < num; i++) { struct scp_domain *scpd = &scp->domains[i]; const struct scp_domain_data *data = &scp_domain_data[i]; @@ -417,22 +636,42 @@ static struct scp *init_scp(struct platform_device *pdev, struct scp_domain *scpd = &scp->domains[i]; struct generic_pm_domain *genpd = &scpd->genpd; const struct scp_domain_data *data = &scp_domain_data[i]; + int clk_cnt = 0; pd_data->domains[i] = genpd; scpd->scp = scp; scpd->data = data; - for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) { - struct clk *c = clk[data->clk_id[j]]; + if (data->clk_id[0]) + for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) { + struct clk *c = clk[data->clk_id[j]]; + + if (IS_ERR(c)) { + dev_err(&pdev->dev, + "%s: clk unavailable\n", + data->name); + return ERR_CAST(c); + } - if (IS_ERR(c)) { - dev_err(&pdev->dev, "%s: clk unavailable\n", + scpd->clk[j] = c; + } + else if (data->basic_clk_name[0]) + for (j = 0; j < MAX_CLKS + && data->basic_clk_name[j]; j++) + scpd->clk[j] = devm_clk_get(&pdev->dev, + data->basic_clk_name[j]); + + if (data->subsys_clk_prefix) { + clk_cnt = init_subsys_clks(pdev, + data->subsys_clk_prefix, + scpd->subsys_clk); + if (clk_cnt < 0) { + dev_err(&pdev->dev, + "%s: subsys clk unavailable\n", data->name); - return ERR_CAST(c); + return ERR_PTR(clk_cnt); } - - scpd->clk[j] = c; } genpd->name = data->name; diff --git a/include/linux/soc/mediatek/scpsys-ext.h b/include/linux/soc/mediatek/scpsys-ext.h new file mode 100644 index 000000000000..d0ed295c88a7 --- /dev/null +++ b/include/linux/soc/mediatek/scpsys-ext.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SOC_MEDIATEK_SCPSYS_EXT_H +#define __SOC_MEDIATEK_SCPSYS_EXT_H + +#define MAX_STEPS 4 + +#define BUS_PROT(_type, _set_ofs, _clr_ofs, \ + _en_ofs, _sta_ofs, _mask, _clr_ack_mask) { \ + .type = _type, \ + .set_ofs = _set_ofs, \ + .clr_ofs = _clr_ofs, \ + .en_ofs = _en_ofs, \ + .sta_ofs = _sta_ofs, \ + .mask = _mask, \ + .clr_ack_mask = _clr_ack_mask, \ + } + +enum regmap_type { + IFR_TYPE, + SMI_TYPE, + MAX_REGMAP_TYPE, +}; + +struct bus_prot { + enum regmap_type type; + u32 set_ofs; + u32 clr_ofs; + u32 en_ofs; + u32 sta_ofs; + u32 mask; + u32 clr_ack_mask; +}; + +int mtk_scpsys_ext_set_bus_protection(const struct bus_prot *bp_table, + struct regmap *infracfg, struct regmap *smi_common); +int mtk_scpsys_ext_clear_bus_protection(const struct bus_prot *bp_table, + struct regmap *infracfg, struct regmap *smi_common); + +#endif /* __SOC_MEDIATEK_SCPSYS_EXT_H */