diff mbox series

pack-protocol.txt: accept error packets in any context

Message ID 20181127045301.103807-1-masayasuzuki@google.com (mailing list archive)
State Superseded, archived
Headers show
Series pack-protocol.txt: accept error packets in any context | expand

Commit Message

Masaya Suzuki Nov. 27, 2018, 4:53 a.m. UTC
In the Git pack protocol definition, an error packet may appear only in
a certain context. However, servers can face a runtime error (e.g. I/O
error) at an arbitrary timing. This patch changes the protocol to allow
an error packet to be sent instead of any packet.

Following this protocol spec change, the error packet handling code is
moved to pkt-line.c.

Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
---
 Documentation/technical/pack-protocol.txt | 20 +++++++++++---------
 builtin/archive.c                         |  2 --
 connect.c                                 |  2 --
 fetch-pack.c                              |  2 --
 pkt-line.c                                |  4 ++++
 5 files changed, 15 insertions(+), 15 deletions(-)

Comments

Junio C Hamano Nov. 27, 2018, 5:28 a.m. UTC | #1
Masaya Suzuki <masayasuzuki@google.com> writes:

> In the Git pack protocol definition, an error packet may appear only in
> a certain context. However, servers can face a runtime error (e.g. I/O
> error) at an arbitrary timing. This patch changes the protocol to allow
> an error packet to be sent instead of any packet.

Makes perfect sense.

> Following this protocol spec change, the error packet handling code is
> moved to pkt-line.c.
>
> Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
> ---
>  Documentation/technical/pack-protocol.txt | 20 +++++++++++---------
>  builtin/archive.c                         |  2 --
>  connect.c                                 |  2 --
>  fetch-pack.c                              |  2 --
>  pkt-line.c                                |  4 ++++
>  5 files changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt
> index 6ac774d5f..7a2375a55 100644
> --- a/Documentation/technical/pack-protocol.txt
> +++ b/Documentation/technical/pack-protocol.txt
> @@ -22,6 +22,16 @@ protocol-common.txt. When the grammar indicate `PKT-LINE(...)`, unless
>  otherwise noted the usual pkt-line LF rules apply: the sender SHOULD
>  include a LF, but the receiver MUST NOT complain if it is not present.
>  
> +An error packet is a special pkt-line that contains an error string.
> +
> +----
> +  error-line     =  PKT-LINE("ERR" SP explanation-text)
> +----
> +
> +Throughout the protocol, where `PKT-LINE(...)` is expected, an error packet MAY
> +be sent. Once this packet is sent by a client or a server, the data transfer
> +process defined in this protocol is terminated.
> +
>  Transports
>  ----------
>  There are three transports over which the packfile protocol is
> @@ -89,13 +99,6 @@ process on the server side over the Git protocol is this:
>       "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" |
>       nc -v example.com 9418
>  
> -If the server refuses the request for some reasons, it could abort
> -gracefully with an error message.
> -
> -----
> -  error-line     =  PKT-LINE("ERR" SP explanation-text)
> -----
> -
>  
>  SSH Transport
>  -------------
> @@ -398,12 +401,11 @@ from the client).
>  Then the server will start sending its packfile data.
>  
>  ----
> -  server-response = *ack_multi ack / nak / error-line
> +  server-response = *ack_multi ack / nak
>    ack_multi       = PKT-LINE("ACK" SP obj-id ack_status)
>    ack_status      = "continue" / "common" / "ready"
>    ack             = PKT-LINE("ACK" SP obj-id)
>    nak             = PKT-LINE("NAK")
> -  error-line     =  PKT-LINE("ERR" SP explanation-text)
>  ----
>  
>  A simple clone may look like this (with no 'have' lines):
> diff --git a/builtin/archive.c b/builtin/archive.c
> index d2455237c..5d179bbd1 100644
> --- a/builtin/archive.c
> +++ b/builtin/archive.c
> @@ -59,8 +59,6 @@ static int run_remote_archiver(int argc, const char **argv,
>  	if (strcmp(buf, "ACK")) {
>  		if (starts_with(buf, "NACK "))
>  			die(_("git archive: NACK %s"), buf + 5);
> -		if (starts_with(buf, "ERR "))
> -			die(_("remote error: %s"), buf + 4);
>  		die(_("git archive: protocol error"));
>  	}
>  
> diff --git a/connect.c b/connect.c
> index 24281b608..458906e60 100644
> --- a/connect.c
> +++ b/connect.c
> @@ -306,8 +306,6 @@ struct ref **get_remote_heads(struct packet_reader *reader,
>  			die_initial_contact(1);
>  		case PACKET_READ_NORMAL:
>  			len = reader->pktlen;
> -			if (len > 4 && skip_prefix(reader->line, "ERR ", &arg))
> -				die(_("remote error: %s"), arg);
>  			break;
>  		case PACKET_READ_FLUSH:
>  			state = EXPECTING_DONE;
> diff --git a/fetch-pack.c b/fetch-pack.c
> index 9691046e6..e66cd7b71 100644
> --- a/fetch-pack.c
> +++ b/fetch-pack.c
> @@ -178,8 +178,6 @@ static enum ack_type get_ack(int fd, struct object_id *result_oid)
>  			return ACK;
>  		}
>  	}
> -	if (skip_prefix(line, "ERR ", &arg))
> -		die(_("remote error: %s"), arg);
>  	die(_("git fetch-pack: expected ACK/NAK, got '%s'"), line);
>  }
>  
> diff --git a/pkt-line.c b/pkt-line.c
> index 04d10bbd0..ce9e42d10 100644
> --- a/pkt-line.c
> +++ b/pkt-line.c
> @@ -346,6 +346,10 @@ enum packet_read_status packet_read_with_status(int fd, char **src_buffer,
>  		return PACKET_READ_EOF;
>  	}
>  
> +	if (starts_with(buffer, "ERR ")) {
> +		die(_("remote error: %s"), buffer + 4);
> +	}
> +
>  	if ((options & PACKET_READ_CHOMP_NEWLINE) &&
>  	    len && buffer[len-1] == '\n')
>  		len--;
Junio C Hamano Nov. 29, 2018, 7:49 a.m. UTC | #2
Junio C Hamano <gitster@pobox.com> writes:

>> diff --git a/connect.c b/connect.c
>> index 24281b608..458906e60 100644
>> --- a/connect.c
>> +++ b/connect.c
>> @@ -306,8 +306,6 @@ struct ref **get_remote_heads(struct packet_reader *reader,
>>  			die_initial_contact(1);
>>  		case PACKET_READ_NORMAL:
>>  			len = reader->pktlen;
>> -			if (len > 4 && skip_prefix(reader->line, "ERR ", &arg))
>> -				die(_("remote error: %s"), arg);
>>  			break;
>>  		case PACKET_READ_FLUSH:
>>  			state = EXPECTING_DONE;

This breaks build by not removing the decl of arg while removing the
last user of that variable in the function.

 connect.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/connect.c b/connect.c
index 458906e60d..4813f005ab 100644
--- a/connect.c
+++ b/connect.c
@@ -296,7 +296,6 @@ struct ref **get_remote_heads(struct packet_reader *reader,
 	struct ref **orig_list = list;
 	int len = 0;
 	enum get_remote_heads_state state = EXPECTING_FIRST_REF;
-	const char *arg;
 
 	*list = NULL;
Junio C Hamano Nov. 29, 2018, 8:42 a.m. UTC | #3
Masaya Suzuki <masayasuzuki@google.com> writes:

> In the Git pack protocol definition, an error packet may appear only in
> a certain context. However, servers can face a runtime error (e.g. I/O
> error) at an arbitrary timing. This patch changes the protocol to allow
> an error packet to be sent instead of any packet.
>
> Following this protocol spec change, the error packet handling code is
> moved to pkt-line.c.
>
> Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
> ---

Have you run tests with this applied?  I noticed 5703.9 now has
stale expectations, but there may be others.
Masaya Suzuki Nov. 29, 2018, 4:10 p.m. UTC | #4
On Thu, Nov 29, 2018 at 3:42 AM Junio C Hamano <gitster@pobox.com> wrote:
>
> Masaya Suzuki <masayasuzuki@google.com> writes:
>
> > In the Git pack protocol definition, an error packet may appear only in
> > a certain context. However, servers can face a runtime error (e.g. I/O
> > error) at an arbitrary timing. This patch changes the protocol to allow
> > an error packet to be sent instead of any packet.
> >
> > Following this protocol spec change, the error packet handling code is
> > moved to pkt-line.c.
> >
> > Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
> > ---
>
> Have you run tests with this applied?  I noticed 5703.9 now has
> stale expectations, but there may be others.

Yes, I did. And it also didn't end up in a build error. Do I have a
different build option...?
Junio C Hamano Nov. 30, 2018, 1:39 a.m. UTC | #5
Masaya Suzuki <masayasuzuki@google.com> writes:

> Yes, I did. And it also didn't end up in a build error. Do I have a
> different build option...?

Passig DEVELOPER=Yes to make turns a bit more warnings on (in this
case, I think it was "unused-variable") and also uses -Werror to
turn warnings into errors.
Stefan Beller Dec. 3, 2018, 11:59 p.m. UTC | #6
> diff --git a/pkt-line.c b/pkt-line.c
> index 04d10bbd0..ce9e42d10 100644
> --- a/pkt-line.c
> +++ b/pkt-line.c
> @@ -346,6 +346,10 @@ enum packet_read_status packet_read_with_status(int fd, char **src_buffer,
>                 return PACKET_READ_EOF;
>         }
>
> +       if (starts_with(buffer, "ERR ")) {
> +               die(_("remote error: %s"), buffer + 4);
> +       }
> +

Handling any ERR line in the pkt reader is okay, as
* we do not pkt-ize pack files and
* we do not have any other parts of the protocol where user data is in
  the first four bytes, which could randomly match this pattern and
* the rest of the pkt-ized part of the protocol never sends
  ERR lines.

Makes sense.
diff mbox series

Patch

diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt
index 6ac774d5f..7a2375a55 100644
--- a/Documentation/technical/pack-protocol.txt
+++ b/Documentation/technical/pack-protocol.txt
@@ -22,6 +22,16 @@  protocol-common.txt. When the grammar indicate `PKT-LINE(...)`, unless
 otherwise noted the usual pkt-line LF rules apply: the sender SHOULD
 include a LF, but the receiver MUST NOT complain if it is not present.
 
+An error packet is a special pkt-line that contains an error string.
+
+----
+  error-line     =  PKT-LINE("ERR" SP explanation-text)
+----
+
+Throughout the protocol, where `PKT-LINE(...)` is expected, an error packet MAY
+be sent. Once this packet is sent by a client or a server, the data transfer
+process defined in this protocol is terminated.
+
 Transports
 ----------
 There are three transports over which the packfile protocol is
@@ -89,13 +99,6 @@  process on the server side over the Git protocol is this:
      "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" |
      nc -v example.com 9418
 
-If the server refuses the request for some reasons, it could abort
-gracefully with an error message.
-
-----
-  error-line     =  PKT-LINE("ERR" SP explanation-text)
-----
-
 
 SSH Transport
 -------------
@@ -398,12 +401,11 @@  from the client).
 Then the server will start sending its packfile data.
 
 ----
-  server-response = *ack_multi ack / nak / error-line
+  server-response = *ack_multi ack / nak
   ack_multi       = PKT-LINE("ACK" SP obj-id ack_status)
   ack_status      = "continue" / "common" / "ready"
   ack             = PKT-LINE("ACK" SP obj-id)
   nak             = PKT-LINE("NAK")
-  error-line     =  PKT-LINE("ERR" SP explanation-text)
 ----
 
 A simple clone may look like this (with no 'have' lines):
diff --git a/builtin/archive.c b/builtin/archive.c
index d2455237c..5d179bbd1 100644
--- a/builtin/archive.c
+++ b/builtin/archive.c
@@ -59,8 +59,6 @@  static int run_remote_archiver(int argc, const char **argv,
 	if (strcmp(buf, "ACK")) {
 		if (starts_with(buf, "NACK "))
 			die(_("git archive: NACK %s"), buf + 5);
-		if (starts_with(buf, "ERR "))
-			die(_("remote error: %s"), buf + 4);
 		die(_("git archive: protocol error"));
 	}
 
diff --git a/connect.c b/connect.c
index 24281b608..458906e60 100644
--- a/connect.c
+++ b/connect.c
@@ -306,8 +306,6 @@  struct ref **get_remote_heads(struct packet_reader *reader,
 			die_initial_contact(1);
 		case PACKET_READ_NORMAL:
 			len = reader->pktlen;
-			if (len > 4 && skip_prefix(reader->line, "ERR ", &arg))
-				die(_("remote error: %s"), arg);
 			break;
 		case PACKET_READ_FLUSH:
 			state = EXPECTING_DONE;
diff --git a/fetch-pack.c b/fetch-pack.c
index 9691046e6..e66cd7b71 100644
--- a/fetch-pack.c
+++ b/fetch-pack.c
@@ -178,8 +178,6 @@  static enum ack_type get_ack(int fd, struct object_id *result_oid)
 			return ACK;
 		}
 	}
-	if (skip_prefix(line, "ERR ", &arg))
-		die(_("remote error: %s"), arg);
 	die(_("git fetch-pack: expected ACK/NAK, got '%s'"), line);
 }
 
diff --git a/pkt-line.c b/pkt-line.c
index 04d10bbd0..ce9e42d10 100644
--- a/pkt-line.c
+++ b/pkt-line.c
@@ -346,6 +346,10 @@  enum packet_read_status packet_read_with_status(int fd, char **src_buffer,
 		return PACKET_READ_EOF;
 	}
 
+	if (starts_with(buffer, "ERR ")) {
+		die(_("remote error: %s"), buffer + 4);
+	}
+
 	if ((options & PACKET_READ_CHOMP_NEWLINE) &&
 	    len && buffer[len-1] == '\n')
 		len--;