[3/4] drm/i915/dsi: Move vlv/icl_dphy_param_init call out of intel_dsi_vbt_init

Commit Message

Hans de Goede Dec. 1, 2018, 11:30 a.m. UTC

The vlv/icl_dphy_param_init calls do various calculations to set dphy
parameters based on the pclk.

Move the calling of vlv/icl_dphy_param_init to vlv_dsi_init to give
vlv_dsi_init a chance to tweak the pclk before these calculations are done.

This also removes the single "if (IS_ICELAKE(dev_priv))" check from
intel_dsi_vbt_init making it fully platform agnostic.

Signed-off-by: Hans de Goede <[e-mail]>
---
 drivers/gpu/drm/i915/intel_dsi.h     | 2 ++
 drivers/gpu/drm/i915/intel_dsi_vbt.c | 9 ++-------
 drivers/gpu/drm/i915/vlv_dsi.c       | 2 ++
 3 files changed, 6 insertions(+), 7 deletions(-)

Patch

diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index 49437b02b213..c888c219835f 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -180,5 +180,7 @@  int intel_dsi_vbt_get_modes(struct intel_dsi *intel_dsi);
 void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
 				 enum mipi_seq seq_id);
 void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec);
+void icl_dphy_param_init(struct intel_dsi *intel_dsi);
+void vlv_dphy_param_init(struct intel_dsi *intel_dsi);
 
 #endif /* _INTEL_DSI_H */
diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 2afd9ddc94e8..f27af47c6e49 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -556,7 +556,7 @@  static void intel_dsi_log_params(struct intel_dsi *intel_dsi)
 #define ICL_HS_ZERO_CNT_MAX	0xf
 #define ICL_EXIT_ZERO_CNT_MAX	0x7
 
-static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
+void icl_dphy_param_init(struct intel_dsi *intel_dsi)
 {
 	struct drm_device *dev = intel_dsi->base.base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
@@ -655,7 +655,7 @@  static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
 	intel_dsi_log_params(intel_dsi);
 }
 
-static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
+void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
 {
 	struct drm_device *dev = intel_dsi->base.base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
@@ -892,11 +892,6 @@  bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 
 	intel_dsi->burst_mode_ratio = burst_mode_ratio;
 
-	if (IS_ICELAKE(dev_priv))
-		icl_dphy_param_init(intel_dsi);
-	else
-		vlv_dphy_param_init(intel_dsi);
-
 	/* delays in VBT are in unit of 100us, so need to convert
 	 * here in ms
 	 * Delay (100us) * 100 /1000 = Delay / 10 (ms) */
diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
index d42ccd127ff4..2ae1124dbf77 100644
--- a/drivers/gpu/drm/i915/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/vlv_dsi.c
@@ -1797,6 +1797,8 @@  void vlv_dsi_init(struct drm_i915_private *dev_priv)
 		goto err;
 	}
 
+	vlv_dphy_param_init(intel_dsi);
+
 	/*
 	 * In case of BYT with CRC PMIC, we need to use GPIO for
 	 * Panel control.