| Message ID | 20181201164301.17274-1-ccaione@baylibre.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [v2] arm64: dts: meson-axg: Enable GPIO interrupt controller | expand |
On Sat, 2018-12-01 at 16:43 +0000, Carlo Caione wrote: > Enable the GPIO interrupt controller for the AXG SoCs. > > Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Jerome Brunet <jbrunet@baylibre.com> writes: > On Sat, 2018-12-01 at 16:43 +0000, Carlo Caione wrote: >> Enable the GPIO interrupt controller for the AXG SoCs. >> >> Signed-off-by: Carlo Caione <ccaione@baylibre.com> > > Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> > Tested-by: Jerome Brunet <jbrunet@baylibre.com> Queued for v4.21 with Jerome's tags (branch: v4.21/dt64) Thanks, Kevin
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index df017dbd2e57..a7d8219f7373 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1414,12 +1414,12 @@ }; gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-gpio-intc"; + compatible = "amlogic,meson-axg-gpio-intc", + "amlogic,meson-gpio-intc"; reg = <0x0 0xf080 0x0 0x10>; interrupt-controller; #interrupt-cells = <2>; amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; }; pwm_ab: pwm@1b000 {
Enable the GPIO interrupt controller for the AXG SoCs. Signed-off-by: Carlo Caione <ccaione@baylibre.com> --- Tested on a custom board derived from S400. @Jerome: I know you had problems with this. I tested this on the apollo board with the PHY IRQ and it seems to work fine. You probably want to N/ACK this. --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)