| Message ID | 1543972116-22505-1-git-send-email-Anson.Huang@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [V2] ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus | expand |
On Tue, Dec 4, 2018 at 11:14 PM Anson Huang <anson.huang@nxp.com> wrote: > > Add egalax touch screen support on i2c2 bus, it is connected > to LVDS0, while the existing one on i2c3 bus is connected to > LVDS1. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
On Wed, Dec 05, 2018 at 01:14:25AM +0000, Anson Huang wrote: > Add egalax touch screen support on i2c2 bus, it is connected > to LVDS0, while the existing one on i2c3 bus is connected to > LVDS1. > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Applied, thanks.
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 6e46a19..d7389b5 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -272,6 +272,16 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_egalax_int>; + interrupt-parent = <&gpio6>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + }; + ov5640: camera@3c { compatible = "ovti,ov5640"; pinctrl-names = "default"; @@ -498,6 +508,12 @@ >; }; + pinctrl_i2c2_egalax_int: i2c2egalaxintgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
Add egalax touch screen support on i2c2 bus, it is connected to LVDS0, while the existing one on i2c3 bus is connected to LVDS1. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)