[v2,1/2] arm64: dts: meson: Fix IRQ trigger type for macirq
diff mbox series

Message ID 20181207105231.25593-2-ccaione@baylibre.com
State Accepted
Headers show
Series
  • meson: Fix IRQ trigger type
Related show

Commit Message

Carlo Caione Dec. 7, 2018, 10:52 a.m. UTC
A long running stress test on a custom board shipping an AXG SoCs and a
Realtek RTL8211F PHY revealed that after a few hours the connection
speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time
the 'macirq' (eth0) IRQ would stop being triggered at all and as
consequence the GMAC IRQs never ACKed.

After a painful investigation the problem seemed to be due to a wrong
defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of
EDGE_RISING.

The change in the macirq IRQ type also solved another long standing
issue affecting this SoC/PHY where EEE was causing the network
connection to die after stressing it with iperf3 (even though much
sooner). It's now possible to remove the 'eee-broken-1000t' quirk as
well.

Fixes: feb3cbea0946 ("ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage")
Fixes: 6d28d577510f ("ARM64: dts: meson-axg: fix ethernet stability issue")
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts      | 1 -
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi          | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi           | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 1 -
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi   | 1 -
 5 files changed, 2 insertions(+), 5 deletions(-)

Comments

Kevin Hilman Dec. 8, 2018, 12:20 a.m. UTC | #1
Carlo Caione <ccaione@baylibre.com> writes:

> A long running stress test on a custom board shipping an AXG SoCs and a
> Realtek RTL8211F PHY revealed that after a few hours the connection
> speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time
> the 'macirq' (eth0) IRQ would stop being triggered at all and as
> consequence the GMAC IRQs never ACKed.
>
> After a painful investigation the problem seemed to be due to a wrong
> defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of
> EDGE_RISING.
>
> The change in the macirq IRQ type also solved another long standing
> issue affecting this SoC/PHY where EEE was causing the network
> connection to die after stressing it with iperf3 (even though much
> sooner). It's now possible to remove the 'eee-broken-1000t' quirk as
> well.
>
> Fixes: feb3cbea0946 ("ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage")
> Fixes: 6d28d577510f ("ARM64: dts: meson-axg: fix ethernet stability issue")
> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
> Tested-by: Jerome Brunet <jbrunet@baylibre.com>
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Carlo Caione <ccaione@baylibre.com>

Queuing this one for v4.21 (dt64 branch)

I'm going to wait for the dust to settle on 'PATCH v2 2/2' for the
32-bit SoCs (and will rely on Martin's recommendation for the final
decision there.)

Kevin

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 18778ada7bd3..4d57363ac536 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -357,7 +357,6 @@ 
 		eth_phy0: ethernet-phy@0 {
 			/* Realtek RTL8211F (0x001cc916) */
 			reg = <0>;
-			eee-broken-1000t;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index df017dbd2e57..b1a42e99cb67 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -143,7 +143,7 @@ 
 			compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
 			reg = <0x0 0xff3f0000 0x0 0x10000
 			       0x0 0xff634540 0x0 0x8>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
 				 <&clkc CLKID_FCLK_DIV2>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index f1e5cdbade5e..58e6bcaac1d8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -462,7 +462,7 @@ 
 			compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
 			reg = <0x0 0xc9410000 0x0 0x10000
 			       0x0 0xc8834540 0x0 0x4>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 54954b314a45..f8d1cedbe600 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -143,7 +143,6 @@ 
 			interrupt-parent = <&gpio_intc>;
 			/* MAC_INTR on GPIOZ_15 */
 			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-			eee-broken-1000t;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 70325b273bd2..ec09bb5792b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -142,7 +142,6 @@ 
 		eth_phy0: ethernet-phy@0 {
 			/* Realtek RTL8211F (0x001cc916) */
 			reg = <0>;
-			eee-broken-1000t;
 		};
 	};
 };