diff mbox series

[V3,5/6] PM / Domains: Factorize dev_pm_genpd_set_performance_state()

Message ID 729bf6e3b2f434df7e11370d01bc8b0a6f80da5a.1544611890.git.viresh.kumar@linaro.org (mailing list archive)
State Not Applicable, archived
Headers show
Series PM / Domains: Allow performance state propagation | expand

Commit Message

Viresh Kumar Dec. 12, 2018, 10:57 a.m. UTC 
Separate out _genpd_set_performance_state() and
_genpd_reeval_performance_state() from
dev_pm_genpd_set_performance_state() to handle performance state update
related stuff. This will be used by a later commit.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/domain.c | 96 +++++++++++++++++++++----------------
 1 file changed, 56 insertions(+), 40 deletions(-)
diff mbox series

Patch

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 1e98c637e069..32ecbefbd191 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -239,6 +239,58 @@  static void genpd_update_accounting(struct generic_pm_domain *genpd)
 static inline void genpd_update_accounting(struct generic_pm_domain *genpd) {}
 #endif
 
+static int _genpd_set_performance_state(struct generic_pm_domain *genpd,
+					unsigned int state)
+{
+	int ret;
+
+	ret = genpd->set_performance_state(genpd, state);
+	if (ret)
+		return ret;
+
+	genpd->performance_state = state;
+	return 0;
+}
+
+static int _genpd_reeval_performance_state(struct generic_pm_domain *genpd,
+					   unsigned int state)
+{
+	struct generic_pm_domain_data *pd_data;
+	struct pm_domain_data *pdd;
+
+	/* New requested state is same as Max requested state */
+	if (state == genpd->performance_state)
+		return 0;
+
+	/* New requested state is higher than Max requested state */
+	if (state > genpd->performance_state)
+		goto update_state;
+
+	/* Traverse all devices within the domain */
+	list_for_each_entry(pdd, &genpd->dev_list, list_node) {
+		pd_data = to_gpd_data(pdd);
+
+		if (pd_data->performance_state > state)
+			state = pd_data->performance_state;
+	}
+
+	if (state == genpd->performance_state)
+		return 0;
+
+	/*
+	 * We aren't propagating performance state changes of a subdomain to its
+	 * masters as we don't have hardware that needs it. Over that, the
+	 * performance states of subdomain and its masters may not have
+	 * one-to-one mapping and would require additional information. We can
+	 * get back to this once we have hardware that needs it. For that
+	 * reason, we don't have to consider performance state of the subdomains
+	 * of genpd here.
+	 */
+
+update_state:
+	return _genpd_set_performance_state(genpd, state);
+}
+
 /**
  * dev_pm_genpd_set_performance_state- Set performance state of device's power
  * domain.
@@ -257,10 +309,9 @@  static inline void genpd_update_accounting(struct generic_pm_domain *genpd) {}
 int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state)
 {
 	struct generic_pm_domain *genpd;
-	struct generic_pm_domain_data *gpd_data, *pd_data;
-	struct pm_domain_data *pdd;
+	struct generic_pm_domain_data *gpd_data;
 	unsigned int prev;
-	int ret = 0;
+	int ret;
 
 	genpd = dev_to_genpd(dev);
 	if (IS_ERR(genpd))
@@ -281,45 +332,10 @@  int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state)
 	prev = gpd_data->performance_state;
 	gpd_data->performance_state = state;
 
-	/* New requested state is same as Max requested state */
-	if (state == genpd->performance_state)
-		goto unlock;
-
-	/* New requested state is higher than Max requested state */
-	if (state > genpd->performance_state)
-		goto update_state;
-
-	/* Traverse all devices within the domain */
-	list_for_each_entry(pdd, &genpd->dev_list, list_node) {
-		pd_data = to_gpd_data(pdd);
-
-		if (pd_data->performance_state > state)
-			state = pd_data->performance_state;
-	}
-
-	if (state == genpd->performance_state)
-		goto unlock;
-
-	/*
-	 * We aren't propagating performance state changes of a subdomain to its
-	 * masters as we don't have hardware that needs it. Over that, the
-	 * performance states of subdomain and its masters may not have
-	 * one-to-one mapping and would require additional information. We can
-	 * get back to this once we have hardware that needs it. For that
-	 * reason, we don't have to consider performance state of the subdomains
-	 * of genpd here.
-	 */
-
-update_state:
-	ret = genpd->set_performance_state(genpd, state);
-	if (ret) {
+	ret = _genpd_reeval_performance_state(genpd, state);
+	if (ret)
 		gpd_data->performance_state = prev;
-		goto unlock;
-	}
 
-	genpd->performance_state = state;
-
-unlock:
 	genpd_unlock(genpd);
 
 	return ret;