[2/3] clk: imx: Build imx8mq clocks on arm64 only
diff mbox series

Message ID 1544707047-4417-3-git-send-email-abel.vesa@nxp.com
State New
Headers show
Series
  • i.MX8MQ build dependency fixes
Related show

Commit Message

Abel Vesa Dec. 13, 2018, 1:17 p.m. UTC
The composite-8m, frac and sccg clocks are not used by any arm32 IMX SoC,
therefore build them only on arm64. CONFIG_ARCH_MXC is arm64 only,
use that.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---
 drivers/clk/imx/Makefile | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Aisheng Dong Dec. 13, 2018, 1:24 p.m. UTC | #1
> -----Original Message-----
> From: Abel Vesa
> Sent: Thursday, December 13, 2018 9:18 PM
> Subject: [PATCH 2/3] clk: imx: Build imx8mq clocks on arm64 only
> 
> The composite-8m, frac and sccg clocks are not used by any arm32 IMX SoC,
> therefore build them only on arm64. CONFIG_ARCH_MXC is arm64 only, use
> that.

CONFIG_ARCH_MXC is not ARM64 only.

> 
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> ---
>  drivers/clk/imx/Makefile | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile index
> 62a1882..cc95744 100644
> --- a/drivers/clk/imx/Makefile
> +++ b/drivers/clk/imx/Makefile
> @@ -3,13 +3,11 @@
>  obj-y += \
>  	clk.o \
>  	clk-busy.o \
> -	clk-composite-8m.o \
>  	clk-cpu.o \
>  	clk-composite-7ulp.o \
>  	clk-divider-gate.o \
>  	clk-fixup-div.o \
>  	clk-fixup-mux.o \
> -	clk-frac-pll.o \
>  	clk-gate-exclusive.o \
>  	clk-gate2.o \
>  	clk-pfd.o \
> @@ -17,8 +15,7 @@ obj-y += \
>  	clk-pllv1.o \
>  	clk-pllv2.o \
>  	clk-pllv3.o \
> -	clk-pllv4.o \
> -	clk-sccg-pll.o
> +	clk-pllv4.o
> 
>  obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
>  obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o @@ -36,4 +33,7 @@
> obj-$(CONFIG_SOC_IMX7D)  += clk-imx7d.o
>  obj-$(CONFIG_SOC_IMX7ULP) += clk-imx7ulp.o
>  obj-$(CONFIG_SOC_VF610)  += clk-vf610.o
> 
> -obj-$(CONFIG_ARCH_MXC) += clk-imx8mq.o
> +obj-$(CONFIG_ARCH_MXC) += clk-imx8mq.o \
> +	clk-composite-8m.o \
> +	clk-frac-pll.o \
> +	clk-sccg-pll.o

I think you may create a CLK_IMX8MQ as I said in other mail for IMX8QXP.

Regards
Dong Aisheng
> --
> 2.7.4

Patch
diff mbox series

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 62a1882..cc95744 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -3,13 +3,11 @@ 
 obj-y += \
 	clk.o \
 	clk-busy.o \
-	clk-composite-8m.o \
 	clk-cpu.o \
 	clk-composite-7ulp.o \
 	clk-divider-gate.o \
 	clk-fixup-div.o \
 	clk-fixup-mux.o \
-	clk-frac-pll.o \
 	clk-gate-exclusive.o \
 	clk-gate2.o \
 	clk-pfd.o \
@@ -17,8 +15,7 @@  obj-y += \
 	clk-pllv1.o \
 	clk-pllv2.o \
 	clk-pllv3.o \
-	clk-pllv4.o \
-	clk-sccg-pll.o
+	clk-pllv4.o
 
 obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
 obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
@@ -36,4 +33,7 @@  obj-$(CONFIG_SOC_IMX7D)  += clk-imx7d.o
 obj-$(CONFIG_SOC_IMX7ULP) += clk-imx7ulp.o
 obj-$(CONFIG_SOC_VF610)  += clk-vf610.o
 
-obj-$(CONFIG_ARCH_MXC) += clk-imx8mq.o
+obj-$(CONFIG_ARCH_MXC) += clk-imx8mq.o \
+	clk-composite-8m.o \
+	clk-frac-pll.o \
+	clk-sccg-pll.o