@@ -975,6 +975,91 @@ static int pca953x_remove(struct i2c_client *client)
return ret;
}
+#ifdef CONFIG_PM_SLEEP
+static int pca953x_regcache_sync(struct device *dev)
+{
+ struct pca953x_chip *chip = dev_get_drvdata(dev);
+ int ret;
+
+ /*
+ * The ordering between direction and output is important,
+ * sync these registers first and only then sync the rest.
+ */
+ ret = regcache_sync_region(chip->regmap, chip->regs->direction,
+ chip->regs->direction + NBANK(chip));
+ if (ret != 0) {
+ dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
+ return ret;
+ }
+
+ ret = regcache_sync_region(chip->regmap, chip->regs->output,
+ chip->regs->output + NBANK(chip));
+ if (ret != 0) {
+ dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
+ return ret;
+ }
+
+#ifdef CONFIG_GPIO_PCA953X_IRQ
+ if (chip->driver_data & PCA_PCAL) {
+ ret = regcache_sync_region(chip->regmap, PCAL953X_IN_LATCH,
+ PCAL953X_IN_LATCH + NBANK(chip));
+ if (ret != 0) {
+ dev_err(dev, "Failed to sync INT latch registers: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = regcache_sync_region(chip->regmap, PCAL953X_INT_MASK,
+ PCAL953X_INT_MASK + NBANK(chip));
+ if (ret != 0) {
+ dev_err(dev, "Failed to sync INT mask registers: %d\n",
+ ret);
+ return ret;
+ }
+ }
+#endif
+
+ return 0;
+}
+
+static int pca953x_suspend(struct device *dev)
+{
+ struct pca953x_chip *chip = dev_get_drvdata(dev);
+
+ regcache_cache_only(chip->regmap, true);
+
+ regulator_disable(chip->regulator);
+
+ return 0;
+}
+
+static int pca953x_resume(struct device *dev)
+{
+ struct pca953x_chip *chip = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regulator_enable(chip->regulator);
+ if (ret != 0) {
+ dev_err(dev, "Failed to enable regulator: %d\n", ret);
+ return 0;
+ }
+
+ regcache_cache_only(chip->regmap, false);
+ regcache_mark_dirty(chip->regmap);
+ ret = pca953x_regcache_sync(dev);
+ if (ret)
+ return ret;
+
+ ret = regcache_sync(chip->regmap);
+ if (ret != 0) {
+ dev_err(dev, "Failed to restore register map: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
/* convenience to stop overlong match-table lines */
#define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int)
#define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int)
@@ -1018,9 +1103,12 @@ static const struct of_device_id pca953x_dt_ids[] = {
MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
+static SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
+
static struct i2c_driver pca953x_driver = {
.driver = {
.name = "pca953x",
+ .pm = &pca953x_pm_ops,
.of_match_table = pca953x_dt_ids,
.acpi_match_table = ACPI_PTR(pca953x_acpi_ids),
},
It is possible that the PCA953x is powered down during suspend. Use regmap cache to assure the registers in the PCA953x are in line with the driver state after resume. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- V2: - Drop the regcache_sync() calls from suspend callback - Fix build with CONFIG_GPIO_PCA953X_IRQ V3: No change --- drivers/gpio/gpio-pca953x.c | 88 +++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+)