diff mbox series

[15/21] PCI: imx6: Restrict PHY register data to 16-bit

Message ID 20181221072716.29017-16-andrew.smirnov@gmail.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show
Series i.MX6, DesignWare PCI improvements | expand

Commit Message

Andrey Smirnov Dec. 21, 2018, 7:27 a.m. UTC 
PHY registers on i.MX6 are 16-bit wide, so we can get rid of explicit
masking if we restrict pcie_phy_read/pcie_phy_write to use 'u16'
instead of 'int'. No functional change intended.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index ddab1859a07e..98e3730e75fa 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -152,10 +152,10 @@  static int pcie_phy_wait_ack(struct imx6_pcie *imx6_pcie, int addr)
 }
 
 /* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
-static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, int *data)
+static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, u16 *data)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
-	u32 val, phy_ctl;
+	u32 phy_ctl;
 	int ret;
 
 	ret = pcie_phy_wait_ack(imx6_pcie, addr);
@@ -170,8 +170,7 @@  static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, int *data)
 	if (ret)
 		return ret;
 
-	val = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT);
-	*data = val & 0xffff;
+	*data = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT);
 
 	/* deassert Read signal */
 	dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x00);
@@ -179,7 +178,7 @@  static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, int *data)
 	return pcie_phy_poll_ack(imx6_pcie, 0);
 }
 
-static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, int data)
+static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	u32 var;
@@ -236,7 +235,7 @@  static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, int data)
 
 static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
 {
-	u32 tmp;
+	u16 tmp;
 
 	pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
 	tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
@@ -547,7 +546,7 @@  static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
 {
 	unsigned long phy_rate = clk_get_rate(imx6_pcie->pcie_phy);
 	int mult, div;
-	u32 val;
+	u16 val;
 
 	switch (phy_rate) {
 	case 125000000: