diff mbox series

hwmon: (nct6775) Fix chip ID for NCT6798D

Message ID 1545838750-20373-1-git-send-email-linux@roeck-us.net (mailing list archive)
State Accepted
Headers show
Series hwmon: (nct6775) Fix chip ID for NCT6798D | expand

Commit Message

Guenter Roeck Dec. 26, 2018, 3:39 p.m. UTC 
The chip ID is 0xd42[8-f], not 0xd45[8-f].

Fixes: 0599682b826f ("hwmon: (nct6775) Add support for NCT6798D")
Reported-by: Michael Cook <mcook@mackal.net>
Cc: Michael Cook <mcook@mackal.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/hwmon/nct6775.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Björn Gerhart May 28, 2019, 5:46 a.m. UTC | #1 
In September of 2018, Nuvoton released the new SuperIO series 6112D, 6114D and 6116D. On the mainboard I need support for, the NCT6116D is built in, so that’s the model I can test against.

Also, I have the datasheet of the series. I would like to add support for the NCT6116D to the nct6775 driver. Anyone facing the same needs for supporting a model of this series?

Best - Björn
diff mbox series

Patch

diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index c3040079b1cb..8f91e366866f 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -44,8 +44,8 @@ 
  * nct6796d    14      7       7       2+6    0xd420 0xc1    0x5ca3
  * nct6797d    14      7       7       2+6    0xd450 0xc1    0x5ca3
  *                                           (0xd451)
- * nct6798d    14      7       7       2+6    0xd458 0xc1    0x5ca3
- *                                           (0xd459)
+ * nct6798d    14      7       7       2+6    0xd428 0xc1    0x5ca3
+ *                                           (0xd429)
  *
  * #temp lists the number of monitored temperature sources (first value) plus
  * the number of directly connectable temperature sensors (second value).
@@ -138,7 +138,7 @@  MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
 #define SIO_NCT6795_ID		0xd350
 #define SIO_NCT6796_ID		0xd420
 #define SIO_NCT6797_ID		0xd450
-#define SIO_NCT6798_ID		0xd458
+#define SIO_NCT6798_ID		0xd428
 #define SIO_ID_MASK		0xFFF8
 
 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };