diff mbox series

PCI: amlogic: fix build failure due to missing linux/gpio/consumer.h header

Message ID 1546592917-27846-1-git-send-email-clabbe@baylibre.com (mailing list archive)
State Not Applicable
Headers show
Series PCI: amlogic: fix build failure due to missing linux/gpio/consumer.h header | expand

Commit Message

Corentin LABBE Jan. 4, 2019, 9:08 a.m. UTC
When building on x86, I got the following build failure:
drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_assert_reset’:
drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
  gpiod_set_value_cansleep(mp->reset_gpio, 0);
  ^~~~~~~~~~~~~~~~~~~~~~~~
  gpio_set_value_cansleep
drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_probe’:
drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function ‘devm_gpiod_get’; did you mean ‘devm_gpio_free’? [-Werror=implicit-function-declaration]
  mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
                   ^~~~~~~~~~~~~~
                   devm_gpio_free
drivers/pci/controller/dwc/pci-meson.c:540:48: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_LOW’?
  mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
                                                ^~~~~~~~~~~~~
                                                GPIOF_INIT_LOW

This is due to the missing linux/gpio/consumer.h header

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 drivers/pci/controller/dwc/pci-meson.c | 1 +
 1 file changed, 1 insertion(+)

Comments

Lorenzo Pieralisi Jan. 4, 2019, 10:30 a.m. UTC | #1
On Fri, Jan 04, 2019 at 09:08:37AM +0000, Corentin Labbe wrote:
> When building on x86, I got the following build failure:

Hi,

what tree are you testing on and which config ?

Thanks,
Lorenzo

> drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_assert_reset’:
> drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
>   gpiod_set_value_cansleep(mp->reset_gpio, 0);
>   ^~~~~~~~~~~~~~~~~~~~~~~~
>   gpio_set_value_cansleep
> drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_probe’:
> drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function ‘devm_gpiod_get’; did you mean ‘devm_gpio_free’? [-Werror=implicit-function-declaration]
>   mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>                    ^~~~~~~~~~~~~~
>                    devm_gpio_free
> drivers/pci/controller/dwc/pci-meson.c:540:48: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_LOW’?
>   mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>                                                 ^~~~~~~~~~~~~
>                                                 GPIOF_INIT_LOW
> 
> This is due to the missing linux/gpio/consumer.h header
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  drivers/pci/controller/dwc/pci-meson.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
> index 241ebe0c4505..e35e9eaa50ee 100644
> --- a/drivers/pci/controller/dwc/pci-meson.c
> +++ b/drivers/pci/controller/dwc/pci-meson.c
> @@ -8,6 +8,7 @@
>  
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/of_device.h>
>  #include <linux/of_gpio.h>
>  #include <linux/pci.h>
> -- 
> 2.19.2
>
Corentin LABBE Jan. 4, 2019, 10:36 a.m. UTC | #2
On Fri, Jan 04, 2019 at 10:30:25AM +0000, Lorenzo Pieralisi wrote:
> On Fri, Jan 04, 2019 at 09:08:37AM +0000, Corentin Labbe wrote:
> > When building on x86, I got the following build failure:
> 
> Hi,
> 
> what tree are you testing on and which config ?

I use the next-20190102 tree
The config can be found at http://kernel.montjoie.ovh/configs/x86

Regards

> 
> Thanks,
> Lorenzo
> 
> > drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_assert_reset’:
> > drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
> >   gpiod_set_value_cansleep(mp->reset_gpio, 0);
> >   ^~~~~~~~~~~~~~~~~~~~~~~~
> >   gpio_set_value_cansleep
> > drivers/pci/controller/dwc/pci-meson.c: In function ‘meson_pcie_probe’:
> > drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function ‘devm_gpiod_get’; did you mean ‘devm_gpio_free’? [-Werror=implicit-function-declaration]
> >   mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> >                    ^~~~~~~~~~~~~~
> >                    devm_gpio_free
> > drivers/pci/controller/dwc/pci-meson.c:540:48: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_LOW’?
> >   mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> >                                                 ^~~~~~~~~~~~~
> >                                                 GPIOF_INIT_LOW
> > 
> > This is due to the missing linux/gpio/consumer.h header
> > 
> > Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> > ---
> >  drivers/pci/controller/dwc/pci-meson.c | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
> > index 241ebe0c4505..e35e9eaa50ee 100644
> > --- a/drivers/pci/controller/dwc/pci-meson.c
> > +++ b/drivers/pci/controller/dwc/pci-meson.c
> > @@ -8,6 +8,7 @@
> >  
> >  #include <linux/clk.h>
> >  #include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> >  #include <linux/of_device.h>
> >  #include <linux/of_gpio.h>
> >  #include <linux/pci.h>
> > -- 
> > 2.19.2
> >
Lorenzo Pieralisi Jan. 4, 2019, 11:17 a.m. UTC | #3
On Fri, Jan 04, 2019 at 11:36:26AM +0100, LABBE Corentin wrote:
> On Fri, Jan 04, 2019 at 10:30:25AM +0000, Lorenzo Pieralisi wrote:
> > On Fri, Jan 04, 2019 at 09:08:37AM +0000, Corentin Labbe wrote:
> > > When building on x86, I got the following build failure:
> > 
> > Hi,
> > 
> > what tree are you testing on and which config ?
> 
> I use the next-20190102 tree
> The config can be found at http://kernel.montjoie.ovh/configs/x86

Ok, right, it is a config that unfortunately the bots failed to test, I
will pick this up and send it to Bjorn for -rc2 (given that the PCI tree
is not in mainline yet).

Thanks,
Lorenzo
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index 241ebe0c4505..e35e9eaa50ee 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -8,6 +8,7 @@ 
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
 #include <linux/pci.h>