[v2,10/20] PCI: dwc: Make use of BIT() in constant definitions
diff mbox series

Message ID 20190104174925.17153-11-andrew.smirnov@gmail.com
State New
Headers show
Series
  • i.MX6, DesignWare PCI improvements
Related show

Commit Message

Andrey Smirnov Jan. 4, 2019, 5:49 p.m. UTC
Avoid using explicit left shifts and convert various definitions to
use BIT() instead. No functional change intended.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/pci/controller/dwc/pcie-designware.c |  2 +-
 drivers/pci/controller/dwc/pcie-designware.h | 18 +++++++++---------
 2 files changed, 10 insertions(+), 10 deletions(-)

Patch
diff mbox series

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index d123ac290b9e..086e87a40316 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -300,7 +300,7 @@  void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
 	}
 
 	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~PCIE_ATU_ENABLE);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, (u32)~PCIE_ATU_ENABLE);
 }
 
 int dw_pcie_wait_for_link(struct dw_pcie *pci)
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 58735fd01668..348e91b6daa2 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -40,11 +40,11 @@ 
 #define PORT_LOGIC_LTSSM_STATE_MASK	0x1f
 #define PORT_LOGIC_LTSSM_STATE_L0	0x11
 #define PCIE_PORT_DEBUG1		0x72C
-#define PCIE_PORT_DEBUG1_LINK_UP		(0x1 << 4)
-#define PCIE_PORT_DEBUG1_LINK_IN_TRAINING	(0x1 << 29)
+#define PCIE_PORT_DEBUG1_LINK_UP		BIT(4)
+#define PCIE_PORT_DEBUG1_LINK_IN_TRAINING	BIT(29)
 
 #define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
-#define PORT_LOGIC_SPEED_CHANGE		(0x1 << 17)
+#define PORT_LOGIC_SPEED_CHANGE		BIT(17)
 #define PORT_LOGIC_LINK_WIDTH_MASK	(0x1f << 8)
 #define PORT_LOGIC_LINK_WIDTH_1_LANES	(0x1 << 8)
 #define PORT_LOGIC_LINK_WIDTH_2_LANES	(0x2 << 8)
@@ -58,8 +58,8 @@ 
 #define PCIE_MSI_INTR0_STATUS		0x830
 
 #define PCIE_ATU_VIEWPORT		0x900
-#define PCIE_ATU_REGION_INBOUND		(0x1 << 31)
-#define PCIE_ATU_REGION_OUTBOUND	(0x0 << 31)
+#define PCIE_ATU_REGION_INBOUND		BIT(31)
+#define PCIE_ATU_REGION_OUTBOUND	0
 #define PCIE_ATU_REGION_INDEX2		(0x2 << 0)
 #define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
 #define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
@@ -69,8 +69,8 @@ 
 #define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
 #define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
 #define PCIE_ATU_CR2			0x908
-#define PCIE_ATU_ENABLE			(0x1 << 31)
-#define PCIE_ATU_BAR_MODE_ENABLE	(0x1 << 30)
+#define PCIE_ATU_ENABLE			BIT(31)
+#define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
 #define PCIE_ATU_LOWER_BASE		0x90C
 #define PCIE_ATU_UPPER_BASE		0x910
 #define PCIE_ATU_LIMIT			0x914
@@ -81,7 +81,7 @@ 
 #define PCIE_ATU_UPPER_TARGET		0x91C
 
 #define PCIE_MISC_CONTROL_1_OFF		0x8BC
-#define PCIE_DBI_RO_WR_EN		(0x1 << 0)
+#define PCIE_DBI_RO_WR_EN		BIT(0)
 
 /*
  * iATU Unroll-specific register definitions
@@ -108,7 +108,7 @@ 
 		((region) << 9)
 
 #define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \
-		(((region) << 9) | (0x1 << 8))
+		(((region) << 9) | BIT(8))
 
 #define MAX_MSI_IRQS			256
 #define MAX_MSI_IRQS_PER_CTRL		32