| Message ID | 20190106171614.12615-4-tduszyns@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | add support for PMS7003 PM sensor | expand |
On Sun, Jan 06, 2019 at 06:16:14PM +0100, Tomasz Duszynski wrote: > Add device tree support for Plantower PMS7003 particulate matter sensor. > > Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> > --- > .../bindings/iio/chemical/plantower,pms7003.txt | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > > diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > new file mode 100644 > index 000000000000..79eb538eb932 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > @@ -0,0 +1,14 @@ > +* Plantower PMS7003 particulate matter sensor > + > +Required properties: > +- compatible: must be "plantower,pms7003" Looks like this has reset and set GPIO lines as well as Vcc supply. Bindings should be complete even if the driver or a platform doesn't use some parts. > + > +Refer to serial/slave-device.txt for generic serial attached device bindings. > + > +Example: > + > +&uart@0 { > + pms7003 { > + compatible = "plantower,pms7003"; > + }; > +}; > -- > 2.20.1 >
On Fri, Jan 11, 2019 at 04:15:26PM -0600, Rob Herring wrote: > On Sun, Jan 06, 2019 at 06:16:14PM +0100, Tomasz Duszynski wrote: > > Add device tree support for Plantower PMS7003 particulate matter sensor. > > > > Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> > > --- > > .../bindings/iio/chemical/plantower,pms7003.txt | 14 ++++++++++++++ > > 1 file changed, 14 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > > > > diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > > new file mode 100644 > > index 000000000000..79eb538eb932 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt > > @@ -0,0 +1,14 @@ > > +* Plantower PMS7003 particulate matter sensor > > + > > +Required properties: > > +- compatible: must be "plantower,pms7003" > > Looks like this has reset and set GPIO lines as well as Vcc supply. > Bindings should be complete even if the driver or a platform doesn't use > some parts. > Fine. I'll add missing pin descriptions in v2 then. > > + > > +Refer to serial/slave-device.txt for generic serial attached device bindings. > > + > > +Example: > > + > > +&uart@0 { > > + pms7003 { > > + compatible = "plantower,pms7003"; > > + }; > > +}; > > -- > > 2.20.1 > >
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt new file mode 100644 index 000000000000..79eb538eb932 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt @@ -0,0 +1,14 @@ +* Plantower PMS7003 particulate matter sensor + +Required properties: +- compatible: must be "plantower,pms7003" + +Refer to serial/slave-device.txt for generic serial attached device bindings. + +Example: + +&uart@0 { + pms7003 { + compatible = "plantower,pms7003"; + }; +};
Add device tree support for Plantower PMS7003 particulate matter sensor. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> --- .../bindings/iio/chemical/plantower,pms7003.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt