[3/3] arm64: dts: ti: k3-am654-base-board: enable USB1
diff mbox series

Message ID 1547200861-17795-4-git-send-email-rogerq@ti.com
State New
Headers show
Series
  • arm64: ti: k3-am654: USB support
Related show

Commit Message

Roger Quadros Jan. 11, 2019, 10:01 a.m. UTC
Add pinmux for USB1 and enable it as a dual role port.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Comments

Nishanth Menon Jan. 15, 2019, 2:37 p.m. UTC | #1
On 12:01-20190111, Roger Quadros wrote:
> Add pinmux for USB1 and enable it as a dual role port.
> 
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> index e41fc3a..c4f7b29 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> @@ -69,6 +69,12 @@
>  			AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */
>  		>;
>  	};
> +
> +	usb1_pins_default: usb1_pins_default {
> +		pinctrl-single,pins = <
> +			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
> +		>;
> +	};
>  };
>  
>  &main_pmx1 {
> @@ -163,3 +169,17 @@
>  		#size-cells= <1>;
>  	};
>  };
> +
> +&dwc3_1 {
> +	status = "okay";
> +};
> +
> +&usb1_phy {
> +	status = "okay";
> +};

NAK -> we dont do status = "okay" in ARMV8.

> +
> +&usb1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb1_pins_default>;
> +	dr_mode = "otg";
> +};
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index e41fc3a..c4f7b29 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -69,6 +69,12 @@ 
 			AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */
 		>;
 	};
+
+	usb1_pins_default: usb1_pins_default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
+		>;
+	};
 };
 
 &main_pmx1 {
@@ -163,3 +169,17 @@ 
 		#size-cells= <1>;
 	};
 };
+
+&dwc3_1 {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+	dr_mode = "otg";
+};