diff --git a/MAINTAINERS b/MAINTAINERS
index 32d444476a90..0790f9a02db8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9849,6 +9849,11 @@ F:	drivers/media/platform/meson/ao-cec.c
 F:	Documentation/devicetree/bindings/media/meson-ao-cec.txt
 T:	git git://linuxtv.org/media_tree.git
 
+METHODE UDPU SUPPORT
+M:	Vladimir Vid <vladimir.vid@sartura.hr>
+S:	Maintained
+F:	arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+
 MICROBLAZE ARCHITECTURE
 M:	Michal Simek <monstr@monstr.eu>
 W:	http://www.monstr.eu/fdt/
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 2eff1f927471..caed4334f27d 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -2,6 +2,7 @@
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
new file mode 100644
index 000000000000..eae30322a037
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree for the uDPU board.
+ * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2018 Methode
+ * Copyright (C) 2018 Telus
+ *
+ * Vladimir Vid <vladimir.vid@sartura.hr>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Methode uDPU Board";
+	compatible = "marvell,armada-3720-db", "marvell,armada3720",
+		     "marvell,armada3710";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		compatible = "gpio-leds";
+
+		led@487 {
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@488 {
+			gpios = <&gpionb 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@489 {
+			gpios = <&gpionb 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@490 {
+			gpios = <&gpionb 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@491 {
+			gpios = <&gpionb 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@492 {
+			gpios = <&gpionb 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&sdhci0 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+&sdhci1 {
+	marvell,xenon-phy-type = "emmc 5.0 phy";
+	cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&mdio {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <54000000>;
+
+		/* bootloader is located on the SPI */
+		partition@0 {
+			label = "uboot";
+			reg = <0 0x400000>;
+		};
+	};
+};
+
+&usb3 {
+	status = "okay";
+	usb-phy = <&usb3_phy>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+};
+
+&eth0 {
+	phy-mode = "sgmii";
+	status = "okay";
+	managed = "in-band-status";
+	sfp = <&sfp_eth0>;
+};
+
+&eth1 {
+	phy-mode = "sgmii";
+	status = "okay";
+	managed = "in-band-status";
+	sfp = <&sfp_eth1>;
+};
+
+&uart0 {
+	status = "okay";
+};
