diff mbox series

[v1,3/8] arm64: dts: sdm845: Add UFS PHY reset

Message ID 20190111230129.127037-4-evgreen@chromium.org (mailing list archive)
State Not Applicable, archived
Headers show
Series phy: qcom-ufs: Enable regulators to be off in suspend | expand

Commit Message

Evan Green Jan. 11, 2019, 11:01 p.m. UTC
Wire up the reset controller in the Qcom UFS controller for the PHY.
This will be used to toggle PHY reset during initialization of the PHY.

Signed-off-by: Evan Green <evgreen@chromium.org>
---
This commit is based atop the series at [1]. Patches 1 and 2 of that
series have landed, but 3, 4, and 5 are still outstanding.

[1] https://lore.kernel.org/lkml/20181210192826.241350-1-evgreen@chromium.org/

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 3 +++
 1 file changed, 3 insertions(+)

Comments

Stephen Boyd Jan. 18, 2019, 10:20 p.m. UTC | #1
Quoting Evan Green (2019-01-11 15:01:24)
> Wire up the reset controller in the Qcom UFS controller for the PHY.
> This will be used to toggle PHY reset during initialization of the PHY.
> 
> Signed-off-by: Evan Green <evgreen@chromium.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Rob Herring (Arm) Jan. 22, 2019, 12:25 a.m. UTC | #2
On Fri, Jan 11, 2019 at 03:01:24PM -0800, Evan Green wrote:
> Wire up the reset controller in the Qcom UFS controller for the PHY.
> This will be used to toggle PHY reset during initialization of the PHY.
> 
> Signed-off-by: Evan Green <evgreen@chromium.org>
> ---
> This commit is based atop the series at [1]. Patches 1 and 2 of that
> series have landed, but 3, 4, and 5 are still outstanding.
> 
> [1] https://lore.kernel.org/lkml/20181210192826.241350-1-evgreen@chromium.org/
> 
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index b29332b265d9e..029ab66405cf4 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -990,6 +990,7 @@
>  			phy-names = "ufsphy";
>  			lanes-per-direction = <2>;
>  			power-domains = <&gcc UFS_PHY_GDSC>;
> +			#reset-cells = <1>;

Is this documented?

>  
>  			clock-names =
>  				"core_clk",
> @@ -1033,6 +1034,8 @@
>  			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
>  				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
>  
> +			resets = <&ufs_mem_hc 0>;
> +			reset-names = "ufsphy";
>  			status = "disabled";
>  
>  			ufs_mem_phy_lanes: lanes@1d87400 {
> -- 
> 2.18.1
>
Evan Green Jan. 22, 2019, 6:13 p.m. UTC | #3
On Mon, Jan 21, 2019 at 4:25 PM Rob Herring <robh@kernel.org> wrote:
>
> On Fri, Jan 11, 2019 at 03:01:24PM -0800, Evan Green wrote:
> > Wire up the reset controller in the Qcom UFS controller for the PHY.
> > This will be used to toggle PHY reset during initialization of the PHY.
> >
> > Signed-off-by: Evan Green <evgreen@chromium.org>
> > ---
> > This commit is based atop the series at [1]. Patches 1 and 2 of that
> > series have landed, but 3, 4, and 5 are still outstanding.
> >
> > [1] https://lore.kernel.org/lkml/20181210192826.241350-1-evgreen@chromium.org/
> >
> >  arch/arm64/boot/dts/qcom/sdm845.dtsi | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index b29332b265d9e..029ab66405cf4 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -990,6 +990,7 @@
> >                       phy-names = "ufsphy";
> >                       lanes-per-direction = <2>;
> >                       power-domains = <&gcc UFS_PHY_GDSC>;
> > +                     #reset-cells = <1>;
>
> Is this documented?
>

No, I'll add this in my next spin. Thanks.
-Evan
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b29332b265d9e..029ab66405cf4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -990,6 +990,7 @@ 
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_PHY_GDSC>;
+			#reset-cells = <1>;
 
 			clock-names =
 				"core_clk",
@@ -1033,6 +1034,8 @@ 
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
 			status = "disabled";
 
 			ufs_mem_phy_lanes: lanes@1d87400 {