[RFC,2/3] arm64: dts: renesas: r8a77970: eagle/v3msk: add QSPI flash support
diff mbox series

Message ID 1e3c7821-1f48-e27b-e3d5-a376b219e590@cogentembedded.com
State RFC
Delegated to: Simon Horman
Headers show
Series
  • Add R8A779{7|8}0 RPC-IF support
Related show

Commit Message

Sergei Shtylyov Jan. 12, 2019, 5:44 p.m. UTC
Define the Eagle/V3MSK board dependent parts of the RPC-IF device node.
Add device nodes for Spansion S25FS512S SPI flash and MTD partitions on it.

Based on the original patches by Dmitry Shifrin.

Signed-off-by: Dmitry Shifrin <dmitry.shifrin@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm64/boot/dts/renesas/r8a77970-eagle.dts |   68 +++++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts |   68 +++++++++++++++++++++++++
 2 files changed, 136 insertions(+)

Patch
diff mbox series

Index: renesas/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -173,12 +173,80 @@ 
 		function = "i2c0";
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
 	};
 };
 
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	renesas,rpc-mode = "spi";
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
Index: renesas/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -145,6 +145,11 @@ 
 		power-source = <3300>;
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
@@ -220,6 +225,69 @@ 
 	status = "okay";
 };
 
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	renesas,rpc-mode = "spi";
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";