[v3,1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
diff mbox series

Message ID 1547709348-17506-2-git-send-email-min.guo@mediatek.com
State New
Headers show
Series
  • Add MediaTek MUSB Controller Driver
Related show

Commit Message

Min Guo Jan. 17, 2019, 7:15 a.m. UTC
From: Min Guo <min.guo@mediatek.com>

This adds support for MediaTek musb controller in
host, peripheral and otg mode.

Signed-off-by: Min Guo <min.guo@mediatek.com>
---
 .../devicetree/bindings/usb/mediatek,musb.txt      | 43 ++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt

Comments

Sergei Shtylyov Jan. 17, 2019, 11:06 a.m. UTC | #1
Hello!

On 01/17/2019 10:15 AM, min.guo@mediatek.com wrote:

> From: Min Guo <min.guo@mediatek.com>
> 
> This adds support for MediaTek musb controller in
> host, peripheral and otg mode.
> 
> Signed-off-by: Min Guo <min.guo@mediatek.com>
> ---
>  .../devicetree/bindings/usb/mediatek,musb.txt      | 43 ++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> new file mode 100644
> index 0000000..3e3f671
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> @@ -0,0 +1,43 @@
> +MediaTek musb DRD/OTG controller
> +-------------------------------------------
> +
> +Required properties:
> + - compatible      : should be "mediatek,mtk-musb"
> + - reg             : specifies physical base address and size of
> +   the registers

   I'd indent it more to align with "specifies", else it looks weird.

> + - interrupts      : interrupt used by musb controller
> + - interrupt-names : must be "mc"
> + - phys            : PHY specifier for the OTG phy
> + - dr_mode         : should be one of "host", "peripheral" or "otg",
> +   refer to usb/generic.txt

  Same here...

> + - clocks          : a list of phandle + clock-specifier pairs, one for
> +   each entry in clock-names

   Here...

> + - clock-names     : must contain "main", "mcu", "univpll"
> +   for clocks of controller

  And here.

> +
> +Optional properties:
> + - extcon : external connector for VBUS and IDPIN changes detection,

   ID pin, maybe?

> +   needed when supports dual-role mode.
> + - vbus-supply : reference to the VBUS regulator, needed when supports
> +   dual-role mode.
> + - power-domains   : a phandle to USB power domain node to control USB's
> +   MTCMOS
[...]

MBR, Sergei
Min Guo Jan. 17, 2019, 12:41 p.m. UTC | #2
Hello!

On Thu, 2019-01-17 at 14:06 +0300, Sergei Shtylyov wrote:
> Hello!
> 
> On 01/17/2019 10:15 AM, min.guo@mediatek.com wrote:
> 
> > From: Min Guo <min.guo@mediatek.com>
> > 
> > This adds support for MediaTek musb controller in
> > host, peripheral and otg mode.
> > 
> > Signed-off-by: Min Guo <min.guo@mediatek.com>
> > ---
> >  .../devicetree/bindings/usb/mediatek,musb.txt      | 43 ++++++++++++++++++++++
> >  1 file changed, 43 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > new file mode 100644
> > index 0000000..3e3f671
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > @@ -0,0 +1,43 @@
> > +MediaTek musb DRD/OTG controller
> > +-------------------------------------------
> > +
> > +Required properties:
> > + - compatible      : should be "mediatek,mtk-musb"
> > + - reg             : specifies physical base address and size of
> > +   the registers
> 
>    I'd indent it more to align with "specifies", else it looks weird.

Okay.

> > + - interrupts      : interrupt used by musb controller
> > + - interrupt-names : must be "mc"
> > + - phys            : PHY specifier for the OTG phy
> > + - dr_mode         : should be one of "host", "peripheral" or "otg",
> > +   refer to usb/generic.txt
> 
>   Same here...

Okay.

> > + - clocks          : a list of phandle + clock-specifier pairs, one for
> > +   each entry in clock-names
> 
>    Here...

Okay.

> > + - clock-names     : must contain "main", "mcu", "univpll"
> > +   for clocks of controller
> 
>   And here.

Okay.

> > +
> > +Optional properties:
> > + - extcon : external connector for VBUS and IDPIN changes detection,
> 
>    ID pin, maybe?

Okay.

> > +   needed when supports dual-role mode.
> > + - vbus-supply : reference to the VBUS regulator, needed when supports
> > +   dual-role mode.
> > + - power-domains   : a phandle to USB power domain node to control USB's
> > +   MTCMOS
> [...]
> 
> MBR, Sergei

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
new file mode 100644
index 0000000..3e3f671
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
@@ -0,0 +1,43 @@ 
+MediaTek musb DRD/OTG controller
+-------------------------------------------
+
+Required properties:
+ - compatible      : should be "mediatek,mtk-musb"
+ - reg             : specifies physical base address and size of
+   the registers
+ - interrupts      : interrupt used by musb controller
+ - interrupt-names : must be "mc"
+ - phys            : PHY specifier for the OTG phy
+ - dr_mode         : should be one of "host", "peripheral" or "otg",
+   refer to usb/generic.txt
+ - clocks          : a list of phandle + clock-specifier pairs, one for
+   each entry in clock-names
+ - clock-names     : must contain "main", "mcu", "univpll"
+   for clocks of controller
+
+Optional properties:
+ - extcon : external connector for VBUS and IDPIN changes detection,
+   needed when supports dual-role mode.
+ - vbus-supply : reference to the VBUS regulator, needed when supports
+   dual-role mode.
+ - power-domains   : a phandle to USB power domain node to control USB's
+   MTCMOS
+
+Example:
+
+usb2: usb@11200000 {
+	compatible = "mediatek,mt2701-musb",
+		     "mediatek,mtk-musb";
+	reg = <0 0x11200000 0 0x1000>;
+	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	interrupt-names = "mc";
+	phys = <&u2port2 PHY_TYPE_USB2>;
+	vbus-supply = <&usb_vbus>;
+	extcon = <&extcon_usb>;
+	dr_mode = "otg";
+	clocks = <&pericfg CLK_PERI_USB0>,
+		 <&pericfg CLK_PERI_USB0_MCU>,
+		 <&pericfg CLK_PERI_USB_SLV>;
+	clock-names = "main","mcu","univpll";
+	power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+};