scsi: dpt_i2o: clean up indentation issues, remove spaces

Commit Message

Colin King Jan. 23, 2019, 12:53 p.m. UTC

From: Colin Ian King <[e-mail]>

There are several lines where the indentation has an extra space,
fix this by removing the spaces.

Signed-off-by: Colin Ian King <[e-mail]>
---
 drivers/scsi/dpt_i2o.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Martin K. Petersen March 19, 2019, 9:11 p.m. UTC | #1

Colin,

> There are several lines where the indentation has an extra space, fix
> this by removing the spaces.

Applied to 5.2/scsi-queue.

Patch

diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 70d1a18278af..f9560a183c12 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -877,8 +877,8 @@  static void adpt_i2o_sys_shutdown(void)
 	adpt_hba *pHba, *pNext;
 	struct adpt_i2o_post_wait_data *p1, *old;
 
-	 printk(KERN_INFO"Shutting down Adaptec I2O controllers.\n");
-	 printk(KERN_INFO"   This could take a few minutes if there are many devices attached\n");
+	printk(KERN_INFO "Shutting down Adaptec I2O controllers.\n");
+	printk(KERN_INFO "   This could take a few minutes if there are many devices attached\n");
 	/* Delete all IOPs from the controller chain */
 	/* They should have already been released by the
 	 * scsi-core
@@ -901,7 +901,7 @@  static void adpt_i2o_sys_shutdown(void)
 //	spin_unlock_irqrestore(&adpt_post_wait_lock, flags);
 	adpt_post_wait_queue = NULL;
 
-	 printk(KERN_INFO "Adaptec I2O controllers down.\n");
+	printk(KERN_INFO "Adaptec I2O controllers down.\n");
 }
 
 static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev)
@@ -3427,7 +3427,7 @@  static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid,
 		return -((res[1] >> 16) & 0xFF); /* -BlockStatus */
 	}
 
-	 return 4 + ((res[1] & 0x0000FFFF) << 2); /* bytes used in resblk */ 
+	return 4 + ((res[1] & 0x0000FFFF) << 2); /* bytes used in resblk */
 }
 
 
@@ -3500,8 +3500,8 @@  static int adpt_i2o_enable_hba(adpt_hba* pHba)
 
 static int adpt_i2o_systab_send(adpt_hba* pHba)
 {
-	 u32 msg[12];
-	 int ret;
+	u32 msg[12];
+	int ret;
 
 	msg[0] = I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6;
 	msg[1] = I2O_CMD_SYS_TAB_SET<<24 | HOST_TID<<12 | ADAPTER_TID;