diff mbox series

arm64: dts: imx8mq-evk: add missing MDIO / PHY nodes

Message ID 20190125121257.7151-1-ccaione@baylibre.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: imx8mq-evk: add missing MDIO / PHY nodes | expand

Commit Message

Carlo Caione Jan. 25, 2019, 12:12 p.m. UTC 
Populate the fec1 node with the missing MDIO and PHY entries.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Fabio Estevam Jan. 25, 2019, 12:24 p.m. UTC | #1 
Hi Carlo,

On Fri, Jan 25, 2019 at 10:13 AM Carlo Caione <ccaione@baylibre.com> wrote:
>
> Populate the fec1 node with the missing MDIO and PHY entries.
>
> Signed-off-by: Carlo Caione <ccaione@baylibre.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> index 64acccc4bfcb..02f6da92957f 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> @@ -37,7 +37,19 @@
>         pinctrl-names = "default";
>         pinctrl-0 = <&pinctrl_fec1>;
>         phy-mode = "rgmii-id";
> +       phy-handle = <&ethphy0>;
> +       fsl,magic-packet;

This looks like an unrelated change.

Otherwise it looks fine.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 64acccc4bfcb..02f6da92957f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -37,7 +37,19 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
 };
 
 &i2c1 {