[V2,2/4] dt-bindings: irq: imx-irqsteer: add multi output interrupts support
diff mbox series

Message ID 1548853196-11447-3-git-send-email-aisheng.dong@nxp.com
State New
Headers show
Series
  • irq: imx-irqsteer: add 32 interrupts chan and multi outputs support
Related show

Commit Message

Aisheng Dong Jan. 30, 2019, 1:05 p.m. UTC
One irqsteer channel can support up to 8 output interrupts.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v1->v2:
 * remove one unnecessary note.
---
 .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt        | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Lucas Stach Jan. 30, 2019, 1:18 p.m. UTC | #1
Am Mittwoch, den 30.01.2019, 13:05 +0000 schrieb Aisheng Dong:
> One irqsteer channel can support up to 8 output interrupts.
> 
> > Cc: Marc Zyngier <marc.zyngier@arm.com>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: devicetree@vger.kernel.org
> > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
> ChangeLog:
> v1->v2:
>  * remove one unnecessary note.
> ---
>  .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt        | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> index 6d0a41b..984ab92 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> @@ -6,8 +6,9 @@ Required properties:
> >  	- "fsl,imx8m-irqsteer"
> >  	- "fsl,imx-irqsteer"
>  - reg: Physical base address and size of registers.
> -- interrupts: Should contain the parent interrupt line used to multiplex the
> -  input interrupts.
> +- interrupts: Should contain the up to 8 parent interrupt lines used to
> +  multiplex the input interrupts. They should be sepcified seqencially

Typos here, should be: "specified sequentially"

> +  from output 0 to 7.
>  - clocks: Should contain one clock for entry in clock-names
>    see Documentation/devicetree/bindings/clock/clock-bindings.txt
>  - clock-names:
Dong Aisheng Jan. 30, 2019, 1:33 p.m. UTC | #2
On Wed, Jan 30, 2019 at 9:21 PM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Am Mittwoch, den 30.01.2019, 13:05 +0000 schrieb Aisheng Dong:
> > One irqsteer channel can support up to 8 output interrupts.
> >
> > > Cc: Marc Zyngier <marc.zyngier@arm.com>
> > > Cc: Rob Herring <robh+dt@kernel.org>
> > > Cc: Lucas Stach <l.stach@pengutronix.de>
> > > Cc: Shawn Guo <shawnguo@kernel.org>
> > Cc: devicetree@vger.kernel.org
> > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> > ---
> > ChangeLog:
> > v1->v2:
> >  * remove one unnecessary note.
> > ---
> >  .../devicetree/bindings/interrupt-controller/fsl,irqsteer.txt        | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> > index 6d0a41b..984ab92 100644
> > --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
> > @@ -6,8 +6,9 @@ Required properties:
> > >     - "fsl,imx8m-irqsteer"
> > >     - "fsl,imx-irqsteer"
> >  - reg: Physical base address and size of registers.
> > -- interrupts: Should contain the parent interrupt line used to multiplex the
> > -  input interrupts.
> > +- interrupts: Should contain the up to 8 parent interrupt lines used to
> > +  multiplex the input interrupts. They should be sepcified seqencially
>
> Typos here, should be: "specified sequentially"
>

Nice catch. Will update in new version.
Thanks

Regards
Dong Aisheng

> > +  from output 0 to 7.
> >  - clocks: Should contain one clock for entry in clock-names
> >    see Documentation/devicetree/bindings/clock/clock-bindings.txt
> >  - clock-names:

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
index 6d0a41b..984ab92 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
@@ -6,8 +6,9 @@  Required properties:
 	- "fsl,imx8m-irqsteer"
 	- "fsl,imx-irqsteer"
 - reg: Physical base address and size of registers.
-- interrupts: Should contain the parent interrupt line used to multiplex the
-  input interrupts.
+- interrupts: Should contain the up to 8 parent interrupt lines used to
+  multiplex the input interrupts. They should be sepcified seqencially
+  from output 0 to 7.
 - clocks: Should contain one clock for entry in clock-names
   see Documentation/devicetree/bindings/clock/clock-bindings.txt
 - clock-names: