[V2,4/4] irq: imx: irqsteer: add multi output interrupts support
diff mbox series

Message ID 1548853196-11447-5-git-send-email-aisheng.dong@nxp.com
State New
Headers show
Series
  • irq: imx-irqsteer: add 32 interrupts chan and multi outputs support
Related show

Commit Message

Aisheng Dong Jan. 30, 2019, 1:06 p.m. UTC
One irqsteer channel can support up to 8 output interrupts.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v1->v2:
 * calculate irq_count by fsl,num-irqs instead of parsing interrupts
   property from devicetree to match the input interrupts and outputs
 * improve output interrupt handler by searching only two registers
   withint the same group
---
 drivers/irqchip/irq-imx-irqsteer.c | 76 +++++++++++++++++++++++++++++---------
 1 file changed, 59 insertions(+), 17 deletions(-)

Comments

Lucas Stach Jan. 30, 2019, 1:32 p.m. UTC | #1
Am Mittwoch, den 30.01.2019, 13:06 +0000 schrieb Aisheng Dong:
> One irqsteer channel can support up to 8 output interrupts.
> 
> > Cc: Marc Zyngier <marc.zyngier@arm.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Cc: Shawn Guo <shawnguo@kernel.org>
> > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
> ChangeLog:
> v1->v2:
>  * calculate irq_count by fsl,num-irqs instead of parsing interrupts
>    property from devicetree to match the input interrupts and outputs
>  * improve output interrupt handler by searching only two registers
>    withint the same group
> ---
>  drivers/irqchip/irq-imx-irqsteer.c | 76 +++++++++++++++++++++++++++++---------
>  1 file changed, 59 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
> index 67ed862..cc40039 100644
> --- a/drivers/irqchip/irq-imx-irqsteer.c
> +++ b/drivers/irqchip/irq-imx-irqsteer.c
> @@ -10,6 +10,7 @@
>  #include <linux/irqchip/chained_irq.h>
>  #include <linux/irqdomain.h>
>  #include <linux/kernel.h>
> +#include <linux/of_irq.h>
>  #include <linux/of_platform.h>
>  #include <linux/spinlock.h>
>  
> @@ -21,10 +22,13 @@
> >  #define CHAN_MINTDIS(t)		(CTRL_STRIDE_OFF(t, 3) + 0x4)
> >  #define CHAN_MASTRSTAT(t)	(CTRL_STRIDE_OFF(t, 3) + 0x8)
>  
> > +#define CHAN_MAX_OUTPUT_INT	0x8
> +
>  struct irqsteer_data {
> > >  	void __iomem		*regs;
> > >  	struct clk		*ipg_clk;
> > > -	int			irq;
> > > +	int			irq[CHAN_MAX_OUTPUT_INT];
> > > +	int			irq_count;
> > >  	raw_spinlock_t		lock;
> > >  	int			reg_num;
> > >  	int			channel;
> @@ -87,26 +91,45 @@ static const struct irq_domain_ops imx_irqsteer_domain_ops = {
> > >  	.xlate		= irq_domain_xlate_onecell,
>  };
>  
> +static int imx_irqsteer_get_hwirq_base(struct irqsteer_data *data, u32 irq)
> +{
> > +	int i;
> +
> > +	for (i = 0; i < data->irq_count; i++) {
> > +		if (data->irq[i] == irq)
> +			break;

return i * 64; here...
> +	}
> +
> +	return i * 64;

... and -EINVAL or something here, so we don't return a out of bounds
hwirq base if the loop ever doesn't match something?
 
> +}
> +
>  static void imx_irqsteer_irq_handler(struct irq_desc *desc)
>  {
> >  	struct irqsteer_data *data = irq_desc_get_handler_data(desc);
> > +	int hwirq;
> >  	int i;
>  
> >  	chained_irq_enter(irq_desc_get_chip(desc), desc);
>  
> > -	for (i = 0; i < data->reg_num * 32; i += 32) {
> > -		int idx = imx_irqsteer_get_reg_index(data, i);
> > +	hwirq = imx_irqsteer_get_hwirq_base(data, irq_desc_get_irq(desc));
> +
> > +	for (i = 0; i < 2; i++) {
> > +		int idx = imx_irqsteer_get_reg_index(data, hwirq);
> >  		unsigned long irqmap;
> >  		int pos, virq;
>  
> > +		if (hwirq >= data->reg_num * 32)
> > +			break;
> +
> >  		irqmap = readl_relaxed(data->regs +
> >  				       CHANSTATUS(idx, data->reg_num));
>  
> >  		for_each_set_bit(pos, &irqmap, 32) {
> > -			virq = irq_find_mapping(data->domain, pos + i);
> +			virq = irq_find_mapping(data->domain, pos + hwirq);

The irq index calculation need to be "pos + i * 32 + hwirq", otherwise
this will map to the wrong virqs for the second register in each group.

>  			if (virq)
> >  				generic_handle_irq(virq);
> >  		}
> +		hwirq += 32;

Could be folded into the loop head.

>  	}
>  
> >  	chained_irq_exit(irq_desc_get_chip(desc), desc);
> @@ -117,7 +140,8 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> >  	struct device_node *np = pdev->dev.of_node;
> >  	struct irqsteer_data *data;
> >  	struct resource *res;
> > -	int ret;
> > +	u32 irqs_num;
> > +	int i, ret;
>  
> >  	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> >  	if (!data)
> @@ -130,12 +154,6 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> >  		return PTR_ERR(data->regs);
> >  	}
>  
> > -	data->irq = platform_get_irq(pdev, 0);
> > -	if (data->irq <= 0) {
> > -		dev_err(&pdev->dev, "failed to get irq\n");
> > -		return -ENODEV;
> > -	}
> -
> >  	data->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
> >  	if (IS_ERR(data->ipg_clk)) {
> >  		ret = PTR_ERR(data->ipg_clk);
> @@ -146,11 +164,17 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
>  
> >  	raw_spin_lock_init(&data->lock);
>  
> > -	of_property_read_u32(np, "fsl,num-irqs", &data->reg_num);
> > +	of_property_read_u32(np, "fsl,num-irqs", &irqs_num);
> >  	of_property_read_u32(np, "fsl,channel", &data->channel);
>  
> > -	/* one register bit map represents 32 input interrupts */
> > -	data->reg_num /= 32;
> > +	/*
> +	 * There is one output irqs for each group of 64 inputs.

"irq", singular.

> +	 * One register bit map can represent 32 input interrupts.
> > +	 */
> > +	data->irq_count = irqs_num / 64;
> > +	if (irqs_num % 64)
> +		data->irq_count += 1;

This is a weird way of writing DIV_ROUND_UP.

> +	data->reg_num = irqs_num / 32;
>  
> >  	if (IS_ENABLED(CONFIG_PM_SLEEP)) {
> >  		data->saved_reg = devm_kzalloc(&pdev->dev,
> @@ -177,8 +201,22 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> >  		return -ENOMEM;
> >  	}
>  
> > -	irq_set_chained_handler_and_data(data->irq, imx_irqsteer_irq_handler,
> > -					 data);
> > +	if (!data->irq_count || data->irq_count > CHAN_MAX_OUTPUT_INT) {
> > +		clk_disable_unprepare(data->ipg_clk);
> > +		return -EINVAL;
> > +	}
> +
> > +	for (i = 0; i < data->irq_count; i++) {
> > +		data->irq[i] = irq_of_parse_and_map(np, i);
> > +		if (!data->irq[i]) {
> > +			clk_disable_unprepare(data->ipg_clk);
> +			return -EINVAL;

With a lot of failure paths now replicating the clk_disable_unprepare,
return error, I think this warrants a common cleanup path that all
those paths could reach via simple goto.

> +		}
> +
> > +		irq_set_chained_handler_and_data(data->irq[i],
> > +						 imx_irqsteer_irq_handler,
> > +						 data);
> > +	}
>  
> >  	platform_set_drvdata(pdev, data);
>  
> @@ -188,8 +226,12 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
>  static int imx_irqsteer_remove(struct platform_device *pdev)
>  {
> >  	struct irqsteer_data *irqsteer_data = platform_get_drvdata(pdev);
> > +	int i;
> +
> > +	for (i = 0; i < irqsteer_data->irq_count; i++)
> > +		irq_set_chained_handler_and_data(irqsteer_data->irq[i],
> > +						 NULL, NULL);
>  
> > -	irq_set_chained_handler_and_data(irqsteer_data->irq, NULL, NULL);
> >  	irq_domain_remove(irqsteer_data->domain);
>  
> >  	clk_disable_unprepare(irqsteer_data->ipg_clk);
Dong Aisheng Jan. 30, 2019, 2:03 p.m. UTC | #2
On Wed, Jan 30, 2019 at 9:33 PM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Am Mittwoch, den 30.01.2019, 13:06 +0000 schrieb Aisheng Dong:
> > One irqsteer channel can support up to 8 output interrupts.
> >
> > > Cc: Marc Zyngier <marc.zyngier@arm.com>
> > > Cc: Lucas Stach <l.stach@pengutronix.de>
> > > Cc: Shawn Guo <shawnguo@kernel.org>
> > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> > ---
> > ChangeLog:
> > v1->v2:
> >  * calculate irq_count by fsl,num-irqs instead of parsing interrupts
> >    property from devicetree to match the input interrupts and outputs
> >  * improve output interrupt handler by searching only two registers
> >    withint the same group
> > ---
> >  drivers/irqchip/irq-imx-irqsteer.c | 76 +++++++++++++++++++++++++++++---------
> >  1 file changed, 59 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
> > index 67ed862..cc40039 100644
> > --- a/drivers/irqchip/irq-imx-irqsteer.c
> > +++ b/drivers/irqchip/irq-imx-irqsteer.c
> > @@ -10,6 +10,7 @@
> >  #include <linux/irqchip/chained_irq.h>
> >  #include <linux/irqdomain.h>
> >  #include <linux/kernel.h>
> > +#include <linux/of_irq.h>
> >  #include <linux/of_platform.h>
> >  #include <linux/spinlock.h>
> >
> > @@ -21,10 +22,13 @@
> > >  #define CHAN_MINTDIS(t)            (CTRL_STRIDE_OFF(t, 3) + 0x4)
> > >  #define CHAN_MASTRSTAT(t)  (CTRL_STRIDE_OFF(t, 3) + 0x8)
> >
> > > +#define CHAN_MAX_OUTPUT_INT        0x8
> > +
> >  struct irqsteer_data {
> > > >   void __iomem            *regs;
> > > >   struct clk              *ipg_clk;
> > > > - int                     irq;
> > > > + int                     irq[CHAN_MAX_OUTPUT_INT];
> > > > + int                     irq_count;
> > > >   raw_spinlock_t          lock;
> > > >   int                     reg_num;
> > > >   int                     channel;
> > @@ -87,26 +91,45 @@ static const struct irq_domain_ops imx_irqsteer_domain_ops = {
> > > >   .xlate          = irq_domain_xlate_onecell,
> >  };
> >
> > +static int imx_irqsteer_get_hwirq_base(struct irqsteer_data *data, u32 irq)
> > +{
> > > +   int i;
> > +
> > > +   for (i = 0; i < data->irq_count; i++) {
> > > +           if (data->irq[i] == irq)
> > +                     break;
>
> return i * 64; here...
> > +     }
> > +
> > +     return i * 64;
>
> ... and -EINVAL or something here, so we don't return a out of bounds
> hwirq base if the loop ever doesn't match something?
>

Good suggestion, will add it.

> > +}
> > +
> >  static void imx_irqsteer_irq_handler(struct irq_desc *desc)
> >  {
> > >     struct irqsteer_data *data = irq_desc_get_handler_data(desc);
> > > +   int hwirq;
> > >     int i;
> >
> > >     chained_irq_enter(irq_desc_get_chip(desc), desc);
> >
> > > -   for (i = 0; i < data->reg_num * 32; i += 32) {
> > > -           int idx = imx_irqsteer_get_reg_index(data, i);
> > > +   hwirq = imx_irqsteer_get_hwirq_base(data, irq_desc_get_irq(desc));
> > +
> > > +   for (i = 0; i < 2; i++) {
> > > +           int idx = imx_irqsteer_get_reg_index(data, hwirq);
> > >             unsigned long irqmap;
> > >             int pos, virq;
> >
> > > +           if (hwirq >= data->reg_num * 32)
> > > +                   break;
> > +
> > >             irqmap = readl_relaxed(data->regs +
> > >                                    CHANSTATUS(idx, data->reg_num));
> >
> > >             for_each_set_bit(pos, &irqmap, 32) {
> > > -                   virq = irq_find_mapping(data->domain, pos + i);
> > +                     virq = irq_find_mapping(data->domain, pos + hwirq);
>
> The irq index calculation need to be "pos + i * 32 + hwirq", otherwise
> this will map to the wrong virqs for the second register in each group.
>

For second register map, hwirq will plus 32 in next round.
So i can't see this will map a wrong virqs.
And it looks to me ""pos + i * 32 + hwirq" is equal to "hwirq + 32".
Am i missed something?

> >                       if (virq)
> > >                             generic_handle_irq(virq);
> > >             }
> > +             hwirq += 32;
>
> Could be folded into the loop head.
>

You mean “for (i = 0; i < 2; i++, hwirq +=32)” ?
I feel that's not quite necessary.

> >       }
> >
> > >     chained_irq_exit(irq_desc_get_chip(desc), desc);
> > @@ -117,7 +140,8 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> > >     struct device_node *np = pdev->dev.of_node;
> > >     struct irqsteer_data *data;
> > >     struct resource *res;
> > > -   int ret;
> > > +   u32 irqs_num;
> > > +   int i, ret;
> >
> > >     data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> > >     if (!data)
> > @@ -130,12 +154,6 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> > >             return PTR_ERR(data->regs);
> > >     }
> >
> > > -   data->irq = platform_get_irq(pdev, 0);
> > > -   if (data->irq <= 0) {
> > > -           dev_err(&pdev->dev, "failed to get irq\n");
> > > -           return -ENODEV;
> > > -   }
> > -
> > >     data->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
> > >     if (IS_ERR(data->ipg_clk)) {
> > >             ret = PTR_ERR(data->ipg_clk);
> > @@ -146,11 +164,17 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> >
> > >     raw_spin_lock_init(&data->lock);
> >
> > > -   of_property_read_u32(np, "fsl,num-irqs", &data->reg_num);
> > > +   of_property_read_u32(np, "fsl,num-irqs", &irqs_num);
> > >     of_property_read_u32(np, "fsl,channel", &data->channel);
> >
> > > -   /* one register bit map represents 32 input interrupts */
> > > -   data->reg_num /= 32;
> > > +   /*
> > +      * There is one output irqs for each group of 64 inputs.
>
> "irq", singular.
>

Got it

> > +      * One register bit map can represent 32 input interrupts.
> > > +    */
> > > +   data->irq_count = irqs_num / 64;
> > > +   if (irqs_num % 64)
> > +             data->irq_count += 1;
>
> This is a weird way of writing DIV_ROUND_UP.
>

Good suggestion

> > +     data->reg_num = irqs_num / 32;
> >
> > >     if (IS_ENABLED(CONFIG_PM_SLEEP)) {
> > >             data->saved_reg = devm_kzalloc(&pdev->dev,
> > @@ -177,8 +201,22 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> > >             return -ENOMEM;
> > >     }
> >
> > > -   irq_set_chained_handler_and_data(data->irq, imx_irqsteer_irq_handler,
> > > -                                    data);
> > > +   if (!data->irq_count || data->irq_count > CHAN_MAX_OUTPUT_INT) {
> > > +           clk_disable_unprepare(data->ipg_clk);
> > > +           return -EINVAL;
> > > +   }
> > +
> > > +   for (i = 0; i < data->irq_count; i++) {
> > > +           data->irq[i] = irq_of_parse_and_map(np, i);
> > > +           if (!data->irq[i]) {
> > > +                   clk_disable_unprepare(data->ipg_clk);
> > +                     return -EINVAL;
>
> With a lot of failure paths now replicating the clk_disable_unprepare,
> return error, I think this warrants a common cleanup path that all
> those paths could reach via simple goto.
>

Sound goods to me

Regards
Dong Aisheng

> > +             }
> > +
> > > +           irq_set_chained_handler_and_data(data->irq[i],
> > > +                                            imx_irqsteer_irq_handler,
> > > +                                            data);
> > > +   }
> >
> > >     platform_set_drvdata(pdev, data);
> >
> > @@ -188,8 +226,12 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> >  static int imx_irqsteer_remove(struct platform_device *pdev)
> >  {
> > >     struct irqsteer_data *irqsteer_data = platform_get_drvdata(pdev);
> > > +   int i;
> > +
> > > +   for (i = 0; i < irqsteer_data->irq_count; i++)
> > > +           irq_set_chained_handler_and_data(irqsteer_data->irq[i],
> > > +                                            NULL, NULL);
> >
> > > -   irq_set_chained_handler_and_data(irqsteer_data->irq, NULL, NULL);
> > >     irq_domain_remove(irqsteer_data->domain);
> >
> > >     clk_disable_unprepare(irqsteer_data->ipg_clk);
Lucas Stach Jan. 30, 2019, 2:11 p.m. UTC | #3
Am Mittwoch, den 30.01.2019, 22:03 +0800 schrieb Dong Aisheng:
> > On Wed, Jan 30, 2019 at 9:33 PM Lucas Stach <l.stach@pengutronix.de> wrote:
> > 
> > Am Mittwoch, den 30.01.2019, 13:06 +0000 schrieb Aisheng Dong:
> > > One irqsteer channel can support up to 8 output interrupts.
> > > 
> > > > > > > > Cc: Marc Zyngier <marc.zyngier@arm.com>
> > > > > > > > Cc: Lucas Stach <l.stach@pengutronix.de>
> > > > > > > > Cc: Shawn Guo <shawnguo@kernel.org>
> > > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> > > 
> > > ---
> > > ChangeLog:
> > > v1->v2:
> > >  * calculate irq_count by fsl,num-irqs instead of parsing interrupts
> > >    property from devicetree to match the input interrupts and outputs
> > >  * improve output interrupt handler by searching only two registers
> > >    withint the same group
> > > ---
> > >  drivers/irqchip/irq-imx-irqsteer.c | 76 +++++++++++++++++++++++++++++---------
> > >  1 file changed, 59 insertions(+), 17 deletions(-)
> > > 
> > > diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
> > > index 67ed862..cc40039 100644
> > > --- a/drivers/irqchip/irq-imx-irqsteer.c
> > > +++ b/drivers/irqchip/irq-imx-irqsteer.c
> > > @@ -10,6 +10,7 @@
> > >  #include <linux/irqchip/chained_irq.h>
> > >  #include <linux/irqdomain.h>
> > >  #include <linux/kernel.h>
> > > +#include <linux/of_irq.h>
> > >  #include <linux/of_platform.h>
> > >  #include <linux/spinlock.h>
> > > 
> > > @@ -21,10 +22,13 @@
> > > >  #define CHAN_MINTDIS(t)            (CTRL_STRIDE_OFF(t, 3) + 0x4)
> > > >  #define CHAN_MASTRSTAT(t)  (CTRL_STRIDE_OFF(t, 3) + 0x8)
> > > > +#define CHAN_MAX_OUTPUT_INT        0x8
> > > 
> > > +
> > >  struct irqsteer_data {
> > > > >   void __iomem            *regs;
> > > > >   struct clk              *ipg_clk;
> > > > > - int                     irq;
> > > > > + int                     irq[CHAN_MAX_OUTPUT_INT];
> > > > > + int                     irq_count;
> > > > >   raw_spinlock_t          lock;
> > > > >   int                     reg_num;
> > > > >   int                     channel;
> > > 
> > > @@ -87,26 +91,45 @@ static const struct irq_domain_ops imx_irqsteer_domain_ops = {
> > > > >   .xlate          = irq_domain_xlate_onecell,
> > > 
> > >  };
> > > 
> > > +static int imx_irqsteer_get_hwirq_base(struct irqsteer_data *data, u32 irq)
> > > +{
> > > > +   int i;
> > > 
> > > +
> > > > +   for (i = 0; i < data->irq_count; i++) {
> > > > +           if (data->irq[i] == irq)
> > > 
> > > +                     break;
> > 
> > return i * 64; here...
> > > +     }
> > > +
> > > +     return i * 64;
> > 
> > ... and -EINVAL or something here, so we don't return a out of bounds
> > hwirq base if the loop ever doesn't match something?
> > 
> 
> Good suggestion, will add it.
> 
> > > +}
> > > +
> > >  static void imx_irqsteer_irq_handler(struct irq_desc *desc)
> > >  {
> > > >     struct irqsteer_data *data = irq_desc_get_handler_data(desc);
> > > > +   int hwirq;
> > > >     int i;
> > > >     chained_irq_enter(irq_desc_get_chip(desc), desc);
> > > > -   for (i = 0; i < data->reg_num * 32; i += 32) {
> > > > -           int idx = imx_irqsteer_get_reg_index(data, i);
> > > > +   hwirq = imx_irqsteer_get_hwirq_base(data, irq_desc_get_irq(desc));
> > > 
> > > +
> > > > +   for (i = 0; i < 2; i++) {
> > > > +           int idx = imx_irqsteer_get_reg_index(data, hwirq);
> > > >             unsigned long irqmap;
> > > >             int pos, virq;
> > > > +           if (hwirq >= data->reg_num * 32)
> > > > +                   break;
> > > 
> > > +
> > > >             irqmap = readl_relaxed(data->regs +
> > > >                                    CHANSTATUS(idx, data->reg_num));
> > > >             for_each_set_bit(pos, &irqmap, 32) {
> > > > -                   virq = irq_find_mapping(data->domain, pos + i);
> > > 
> > > +                     virq = irq_find_mapping(data->domain, pos + hwirq);
> > 
> > The irq index calculation need to be "pos + i * 32 + hwirq", otherwise
> > this will map to the wrong virqs for the second register in each group.
> > 
> 
> For second register map, hwirq will plus 32 in next round.
> So i can't see this will map a wrong virqs.
> And it looks to me ""pos + i * 32 + hwirq" is equal to "hwirq + 32".
> Am i missed something?

You are right, I forgot about the hwirq being incremented in the loop
when writing this comment.

> > >                       if (virq)
> > > >                             generic_handle_irq(virq);
> > > >             }
> > > 
> > > +             hwirq += 32;
> > 
> > Could be folded into the loop head.
> > 
> 
> You mean “for (i = 0; i < 2; i++, hwirq +=32)” ?
> I feel that's not quite necessary.

I personally find that quite a bit clearer than incrementing the loop
variables at different spots. And I probably wouldn't have missed hwirq
being incremented in the loop if I had seen it in the head.

Regards,
Lucas

Patch
diff mbox series

diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
index 67ed862..cc40039 100644
--- a/drivers/irqchip/irq-imx-irqsteer.c
+++ b/drivers/irqchip/irq-imx-irqsteer.c
@@ -10,6 +10,7 @@ 
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/spinlock.h>
 
@@ -21,10 +22,13 @@ 
 #define CHAN_MINTDIS(t)		(CTRL_STRIDE_OFF(t, 3) + 0x4)
 #define CHAN_MASTRSTAT(t)	(CTRL_STRIDE_OFF(t, 3) + 0x8)
 
+#define CHAN_MAX_OUTPUT_INT	0x8
+
 struct irqsteer_data {
 	void __iomem		*regs;
 	struct clk		*ipg_clk;
-	int			irq;
+	int			irq[CHAN_MAX_OUTPUT_INT];
+	int			irq_count;
 	raw_spinlock_t		lock;
 	int			reg_num;
 	int			channel;
@@ -87,26 +91,45 @@  static const struct irq_domain_ops imx_irqsteer_domain_ops = {
 	.xlate		= irq_domain_xlate_onecell,
 };
 
+static int imx_irqsteer_get_hwirq_base(struct irqsteer_data *data, u32 irq)
+{
+	int i;
+
+	for (i = 0; i < data->irq_count; i++) {
+		if (data->irq[i] == irq)
+			break;
+	}
+
+	return i * 64;
+}
+
 static void imx_irqsteer_irq_handler(struct irq_desc *desc)
 {
 	struct irqsteer_data *data = irq_desc_get_handler_data(desc);
+	int hwirq;
 	int i;
 
 	chained_irq_enter(irq_desc_get_chip(desc), desc);
 
-	for (i = 0; i < data->reg_num * 32; i += 32) {
-		int idx = imx_irqsteer_get_reg_index(data, i);
+	hwirq = imx_irqsteer_get_hwirq_base(data, irq_desc_get_irq(desc));
+
+	for (i = 0; i < 2; i++) {
+		int idx = imx_irqsteer_get_reg_index(data, hwirq);
 		unsigned long irqmap;
 		int pos, virq;
 
+		if (hwirq >= data->reg_num * 32)
+			break;
+
 		irqmap = readl_relaxed(data->regs +
 				       CHANSTATUS(idx, data->reg_num));
 
 		for_each_set_bit(pos, &irqmap, 32) {
-			virq = irq_find_mapping(data->domain, pos + i);
+			virq = irq_find_mapping(data->domain, pos + hwirq);
 			if (virq)
 				generic_handle_irq(virq);
 		}
+		hwirq += 32;
 	}
 
 	chained_irq_exit(irq_desc_get_chip(desc), desc);
@@ -117,7 +140,8 @@  static int imx_irqsteer_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct irqsteer_data *data;
 	struct resource *res;
-	int ret;
+	u32 irqs_num;
+	int i, ret;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
@@ -130,12 +154,6 @@  static int imx_irqsteer_probe(struct platform_device *pdev)
 		return PTR_ERR(data->regs);
 	}
 
-	data->irq = platform_get_irq(pdev, 0);
-	if (data->irq <= 0) {
-		dev_err(&pdev->dev, "failed to get irq\n");
-		return -ENODEV;
-	}
-
 	data->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
 	if (IS_ERR(data->ipg_clk)) {
 		ret = PTR_ERR(data->ipg_clk);
@@ -146,11 +164,17 @@  static int imx_irqsteer_probe(struct platform_device *pdev)
 
 	raw_spin_lock_init(&data->lock);
 
-	of_property_read_u32(np, "fsl,num-irqs", &data->reg_num);
+	of_property_read_u32(np, "fsl,num-irqs", &irqs_num);
 	of_property_read_u32(np, "fsl,channel", &data->channel);
 
-	/* one register bit map represents 32 input interrupts */
-	data->reg_num /= 32;
+	/*
+	 * There is one output irqs for each group of 64 inputs.
+	 * One register bit map can represent 32 input interrupts.
+	 */
+	data->irq_count = irqs_num / 64;
+	if (irqs_num % 64)
+		data->irq_count += 1;
+	data->reg_num = irqs_num / 32;
 
 	if (IS_ENABLED(CONFIG_PM_SLEEP)) {
 		data->saved_reg = devm_kzalloc(&pdev->dev,
@@ -177,8 +201,22 @@  static int imx_irqsteer_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	irq_set_chained_handler_and_data(data->irq, imx_irqsteer_irq_handler,
-					 data);
+	if (!data->irq_count || data->irq_count > CHAN_MAX_OUTPUT_INT) {
+		clk_disable_unprepare(data->ipg_clk);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < data->irq_count; i++) {
+		data->irq[i] = irq_of_parse_and_map(np, i);
+		if (!data->irq[i]) {
+			clk_disable_unprepare(data->ipg_clk);
+			return -EINVAL;
+		}
+
+		irq_set_chained_handler_and_data(data->irq[i],
+						 imx_irqsteer_irq_handler,
+						 data);
+	}
 
 	platform_set_drvdata(pdev, data);
 
@@ -188,8 +226,12 @@  static int imx_irqsteer_probe(struct platform_device *pdev)
 static int imx_irqsteer_remove(struct platform_device *pdev)
 {
 	struct irqsteer_data *irqsteer_data = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < irqsteer_data->irq_count; i++)
+		irq_set_chained_handler_and_data(irqsteer_data->irq[i],
+						 NULL, NULL);
 
-	irq_set_chained_handler_and_data(irqsteer_data->irq, NULL, NULL);
 	irq_domain_remove(irqsteer_data->domain);
 
 	clk_disable_unprepare(irqsteer_data->ipg_clk);