diff mbox series

[7/9] ARM: dts: sun9i: Add A80 GMAC RGMII pinmux setting

Message ID 20190206033239.3619-8-wens@csie.org (mailing list archive)
State Mainlined, archived
Headers show
Series ARM: sun9i: a80: Enable GMAC | expand

Commit Message

Chen-Yu Tsai Feb. 6, 2019, 3:32 a.m. UTC 
The GMAC (gigabit ethernet controller) supports RGMII to connect to
the ethernet PHY, for gigabit network speeds.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index f0c7acf2d0a4..6fb292e0b662 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -1000,6 +1000,19 @@ 
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						 "PA4", "PA5", "PA7", "PA8",
+						 "PA9", "PA10", "PA12", "PA13",
+						 "PA15", "PA16", "PA17";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
 			i2c3_pins: i2c3-pins {
 				pins = "PG10", "PG11";
 				function = "i2c3";