[v6,3/8] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes
diff mbox series

Message ID 20190206051335.23799-4-bjorn.andersson@linaro.org
State New
Headers show
Series
  • Qualcomm AOSS QMP driver and modem dts
Related show

Commit Message

Bjorn Andersson Feb. 6, 2019, 5:13 a.m. UTC
Add the Audio DSP (ADSP) and Compute DSP (CDSP) nodes for TrustZone
based remoteproc, supporting booting these cores on e.g. the MTP, and
enable the same for the MTP.

Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v5:
- None

 arch/arm64/boot/dts/qcom/sdm845-mtp.dts |  8 ++++
 arch/arm64/boot/dts/qcom/sdm845.dtsi    | 58 +++++++++++++++++++++++++
 2 files changed, 66 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 89071463a84a..2e78638eb73b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -48,6 +48,10 @@ 
 	};
 };
 
+&adsp_pas {
+	status = "okay";
+};
+
 &apps_rsc {
 	pm8998-rpmh-regulators {
 		compatible = "qcom,pm8998-rpmh-regulators";
@@ -344,6 +348,10 @@ 
 	};
 };
 
+&cdsp_pas {
+	status = "okay";
+};
+
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index a33d27b3a389..12efbdb1fa2e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -324,6 +324,64 @@ 
 		};
 	};
 
+	adsp_pas: remoteproc-adsp {
+		compatible = "qcom,sdm845-adsp-pas";
+
+		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready",
+				  "handover", "stop-ack";
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "xo";
+
+		memory-region = <&adsp_mem>;
+
+		qcom,smem-states = <&adsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+
+		status = "disabled";
+
+		glink-edge {
+			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+			label = "lpass";
+			qcom,remote-pid = <2>;
+			mboxes = <&apss_shared 8>;
+		};
+	};
+
+	cdsp_pas: remoteproc-cdsp {
+		compatible = "qcom,sdm845-cdsp-pas";
+
+		interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready",
+				  "handover", "stop-ack";
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "xo";
+
+		memory-region = <&cdsp_mem>;
+
+		qcom,smem-states = <&cdsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+
+		status = "disabled";
+
+		glink-edge {
+			interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+			label = "turing";
+			qcom,remote-pid = <5>;
+			mboxes = <&apss_shared 4>;
+		};
+	};
+
 	tcsr_mutex: hwlock {
 		compatible = "qcom,tcsr-mutex";
 		syscon = <&tcsr_mutex_regs 0 0x1000>;