[v2,09/11] arm: dts: qcom: mdm9615: add interrupt controller properties
diff mbox series

Message ID 20190208021631.30252-10-masneyb@onstation.org
State Not Applicable, archived
Delegated to: Andy Gross
Headers show
Series
  • qcom: ssbi-gpio: add support for hierarchical IRQ chip
Related show

Commit Message

Brian Masney Feb. 8, 2019, 2:16 a.m. UTC
Add interrupt controller properties now that ssbi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it.

Note that the IRQs started at 24 instead of 192 like all of the other
PMICs. This is the same IRQs as the MPP for this board. qcom-pm8xxx.c
doesn't set the shared IRQs so this is highly likely to be a copy and
paste error.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
Changes since v1:
- None

 arch/arm/boot/dts/qcom-mdm9615.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index e49f67ad5dbc..02afc6a42005 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -323,13 +323,8 @@ 
 
 				pmicgpio: gpio@150 {
 					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <24 IRQ_TYPE_NONE>,
-						     <25 IRQ_TYPE_NONE>,
-						     <26 IRQ_TYPE_NONE>,
-						     <27 IRQ_TYPE_NONE>,
-						     <28 IRQ_TYPE_NONE>,
-						     <29 IRQ_TYPE_NONE>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 					gpio-controller;
 					#gpio-cells = <2>;
 				};