[V2,4/4] genirq/affinity: Document .calc_sets as required in case of multiple sets
diff mbox series

Message ID 20190212130439.14501-5-ming.lei@redhat.com
State New
Headers show
Series
  • genirq/affinity: add .calc_sets for improving IRQ allocation & spread
Related show

Commit Message

Ming Lei Feb. 12, 2019, 1:04 p.m. UTC
Now NVMe has implemented the .calc_sets callback for caculating each
set's vectors.

For other cases of multiple irq sets, it isn't a good way to pre-caculate
each set's vectors before allocating IRQ vectors because NVMe's same issue
exists too.

Document .calc_sets as required explicitly for multiple sets.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
---
 drivers/pci/msi.c         | 4 ++--
 include/linux/interrupt.h | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)

Comments

Bjorn Helgaas Feb. 12, 2019, 11:42 p.m. UTC | #1
On Tue, Feb 12, 2019 at 09:04:39PM +0800, Ming Lei wrote:
> Now NVMe has implemented the .calc_sets callback for caculating each
> set's vectors.
> 
> For other cases of multiple irq sets, it isn't a good way to pre-caculate
> each set's vectors before allocating IRQ vectors because NVMe's same issue
> exists too.

s/irq/IRQ/ so it's consistent in the paragraph.

> Document .calc_sets as required explicitly for multiple sets.
> 
> Signed-off-by: Ming Lei <ming.lei@redhat.com>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Note minor comments below.

> ---
>  drivers/pci/msi.c         | 4 ++--
>  include/linux/interrupt.h | 3 ++-
>  2 files changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 4c0b47867258..9f91fa713141 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -1039,7 +1039,7 @@ static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
>  	 * If the caller is passing in sets, we can't support a range of
>  	 * vectors. The caller needs to handle that.

Looks like this comment needs to be tweaked, maybe along the lines of:

  If the caller requests multiple sets of IRQs where each set requires
  different affinity, it must also supply a ->calc_sets() callback to
  compute the affinity cpumask for each set.

(I'm not 100% clear on how calc_sets() works, so I might not have
described this exactly right.)

>  	 */
> -	if (affd && affd->nr_sets && minvec != maxvec)
> +	if (affd && affd->nr_sets > 1 && !affd->calc_sets)
>  		return -EINVAL;
>  
>  	if (WARN_ON_ONCE(dev->msi_enabled))
> @@ -1097,7 +1097,7 @@ static int __pci_enable_msix_range(struct pci_dev *dev,
>  	 * If the caller is passing in sets, we can't support a range of
>  	 * supported vectors. The caller needs to handle that.

Similar comment update here?

>  	 */
> -	if (affd && affd->nr_sets && minvec != maxvec)
> +	if (affd && affd->nr_sets > 1 && !affd->calc_sets)
>  		return -EINVAL;
>  
>  	if (WARN_ON_ONCE(dev->msix_enabled))
> diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
> index 7a27f6ba1f2f..a053f7fb0ff1 100644
> --- a/include/linux/interrupt.h
> +++ b/include/linux/interrupt.h
> @@ -269,7 +269,8 @@ struct irq_affinity_notify {
>   *			the MSI(-X) vector space
>   * @nr_sets:		Length of passed in *sets array
>   * @set_vectors:	Number of affinitized sets
> - * @calc_sets:		Callback for caculating set vectors
> + * @calc_sets:		Callback for caculating set vectors, required for
> + * 			multiple irq sets.
>   * @priv:		Private data of @calc_sets
>   */
>  struct irq_affinity {
> -- 
> 2.9.5
>

Patch
diff mbox series

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 4c0b47867258..9f91fa713141 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -1039,7 +1039,7 @@  static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
 	 * If the caller is passing in sets, we can't support a range of
 	 * vectors. The caller needs to handle that.
 	 */
-	if (affd && affd->nr_sets && minvec != maxvec)
+	if (affd && affd->nr_sets > 1 && !affd->calc_sets)
 		return -EINVAL;
 
 	if (WARN_ON_ONCE(dev->msi_enabled))
@@ -1097,7 +1097,7 @@  static int __pci_enable_msix_range(struct pci_dev *dev,
 	 * If the caller is passing in sets, we can't support a range of
 	 * supported vectors. The caller needs to handle that.
 	 */
-	if (affd && affd->nr_sets && minvec != maxvec)
+	if (affd && affd->nr_sets > 1 && !affd->calc_sets)
 		return -EINVAL;
 
 	if (WARN_ON_ONCE(dev->msix_enabled))
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 7a27f6ba1f2f..a053f7fb0ff1 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -269,7 +269,8 @@  struct irq_affinity_notify {
  *			the MSI(-X) vector space
  * @nr_sets:		Length of passed in *sets array
  * @set_vectors:	Number of affinitized sets
- * @calc_sets:		Callback for caculating set vectors
+ * @calc_sets:		Callback for caculating set vectors, required for
+ * 			multiple irq sets.
  * @priv:		Private data of @calc_sets
  */
 struct irq_affinity {