diff mbox series

ARM: pm: fix HYP/SVC mode mismatch when MCPM is used

Message ID 20190214143114.24356-1-m.szyprowski@samsung.com (mailing list archive)
State New, archived
Headers show
Series ARM: pm: fix HYP/SVC mode mismatch when MCPM is used | expand

Commit Message

Marek Szyprowski Feb. 14, 2019, 2:31 p.m. UTC
MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to
perform low-level platform initialization. This results in a try to install
HYP stubs for the second time for each CPU and results in false HYP/SVC
mode mismatch detection. The HYP stubs are already installed at the
beginning of the kernel initialization on the boot CPU (head.S) or in the
secondary_startup() for other CPUs. To fix this issue MCPM code should use
a cpu_resume() routine without HYP stubs installation.

This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid
XU3/XU4/HC1 boards.

Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/common/mcpm_entry.c   |  2 +-
 arch/arm/include/asm/suspend.h |  1 +
 arch/arm/kernel/sleep.S        | 11 +++++++++++
 3 files changed, 13 insertions(+), 1 deletion(-)

Comments

Nicolas Pitre Feb. 14, 2019, 4:05 p.m. UTC | #1
On Thu, 14 Feb 2019, Marek Szyprowski wrote:

> MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to
> perform low-level platform initialization. This results in a try to install
> HYP stubs for the second time for each CPU and results in false HYP/SVC
> mode mismatch detection. The HYP stubs are already installed at the
> beginning of the kernel initialization on the boot CPU (head.S) or in the
> secondary_startup() for other CPUs. To fix this issue MCPM code should use
> a cpu_resume() routine without HYP stubs installation.
> 
> This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid
> XU3/XU4/HC1 boards.
> 
> Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Acked-by: Nicolas Pitre <nico@linaro.org>


> ---
>  arch/arm/common/mcpm_entry.c   |  2 +-
>  arch/arm/include/asm/suspend.h |  1 +
>  arch/arm/kernel/sleep.S        | 11 +++++++++++
>  3 files changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
> index ad574d20415c..1b1b82b37ce0 100644
> --- a/arch/arm/common/mcpm_entry.c
> +++ b/arch/arm/common/mcpm_entry.c
> @@ -381,7 +381,7 @@ static int __init nocache_trampoline(unsigned long _arg)
>  	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
>  	phys_reset_t phys_reset;
>  
> -	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
> +	mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
>  	setup_mm_for_reboot();
>  
>  	__mcpm_cpu_going_down(cpu, cluster);
> diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
> index 452bbdcbcc83..506314265c6f 100644
> --- a/arch/arm/include/asm/suspend.h
> +++ b/arch/arm/include/asm/suspend.h
> @@ -10,6 +10,7 @@ struct sleep_save_sp {
>  };
>  
>  extern void cpu_resume(void);
> +extern void cpu_resume_no_hyp(void);
>  extern void cpu_resume_arm(void);
>  extern int cpu_suspend(unsigned long, int (*)(unsigned long));
>  
> diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
> index a8257fc9cf2a..b856d183691e 100644
> --- a/arch/arm/kernel/sleep.S
> +++ b/arch/arm/kernel/sleep.S
> @@ -122,6 +122,11 @@ ENDPROC(cpu_resume_after_mmu)
>  
>  #ifdef CONFIG_MMU
>  	.arm
> +#ifdef CONFIG_MCPM
> +ENTRY(cpu_resume_no_hyp)
> +ARM_BE8(setend be)			@ ensure we are in BE mode
> +	b	0f
> +#endif
>  ENTRY(cpu_resume_arm)
>   THUMB(	badr	r9, 1f		)	@ Kernel is entered in ARM.
>   THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
> @@ -135,6 +140,9 @@ ARM_BE8(setend be)			@ ensure we are in BE mode
>  	bl	__hyp_stub_install_secondary
>  #endif
>  	safe_svcmode_maskall r1
> +#ifdef CONFIG_MCPM
> +0:
> +#endif
>  	mov	r1, #0
>  	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
>  	ALT_UP_B(1f)
> @@ -163,6 +171,9 @@ ENDPROC(cpu_resume)
>  
>  #ifdef CONFIG_MMU
>  ENDPROC(cpu_resume_arm)
> +#endif
> +#ifdef CONFIG_MCPM
> +ENDPROC(cpu_resume_no_hyp)
>  #endif
>  
>  	.align 2
> -- 
> 2.17.1
> 
>
Russell King (Oracle) Feb. 14, 2019, 4:58 p.m. UTC | #2
On Thu, Feb 14, 2019 at 03:31:14PM +0100, Marek Szyprowski wrote:
> MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to
> perform low-level platform initialization. This results in a try to install
> HYP stubs for the second time for each CPU and results in false HYP/SVC
> mode mismatch detection. The HYP stubs are already installed at the
> beginning of the kernel initialization on the boot CPU (head.S) or in the
> secondary_startup() for other CPUs. To fix this issue MCPM code should use
> a cpu_resume() routine without HYP stubs installation.
> 
> This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid
> XU3/XU4/HC1 boards.
> 
> Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  arch/arm/common/mcpm_entry.c   |  2 +-
>  arch/arm/include/asm/suspend.h |  1 +
>  arch/arm/kernel/sleep.S        | 11 +++++++++++
>  3 files changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
> index ad574d20415c..1b1b82b37ce0 100644
> --- a/arch/arm/common/mcpm_entry.c
> +++ b/arch/arm/common/mcpm_entry.c
> @@ -381,7 +381,7 @@ static int __init nocache_trampoline(unsigned long _arg)
>  	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
>  	phys_reset_t phys_reset;
>  
> -	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
> +	mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
>  	setup_mm_for_reboot();
>  
>  	__mcpm_cpu_going_down(cpu, cluster);
> diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
> index 452bbdcbcc83..506314265c6f 100644
> --- a/arch/arm/include/asm/suspend.h
> +++ b/arch/arm/include/asm/suspend.h
> @@ -10,6 +10,7 @@ struct sleep_save_sp {
>  };
>  
>  extern void cpu_resume(void);
> +extern void cpu_resume_no_hyp(void);
>  extern void cpu_resume_arm(void);
>  extern int cpu_suspend(unsigned long, int (*)(unsigned long));
>  
> diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
> index a8257fc9cf2a..b856d183691e 100644
> --- a/arch/arm/kernel/sleep.S
> +++ b/arch/arm/kernel/sleep.S
> @@ -122,6 +122,11 @@ ENDPROC(cpu_resume_after_mmu)
>  
>  #ifdef CONFIG_MMU
>  	.arm
> +#ifdef CONFIG_MCPM
> +ENTRY(cpu_resume_no_hyp)
> +ARM_BE8(setend be)			@ ensure we are in BE mode
> +	b	0f

What if the kernel is built for Thumb?  You'll be branching to thumb
code at the '0' label - don't you need to do the same that
cpu_resume_arm does below?

> +#endif
>  ENTRY(cpu_resume_arm)
>   THUMB(	badr	r9, 1f		)	@ Kernel is entered in ARM.
>   THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
> @@ -135,6 +140,9 @@ ARM_BE8(setend be)			@ ensure we are in BE mode
>  	bl	__hyp_stub_install_secondary
>  #endif
>  	safe_svcmode_maskall r1
> +#ifdef CONFIG_MCPM
> +0:
> +#endif

You don't need to conditionalise this.  I'd also use a symbol rather
than a numeric label given that safe_svcmode_maskall is a macro that
also uses numeric labels.

>  	mov	r1, #0
>  	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
>  	ALT_UP_B(1f)
> @@ -163,6 +171,9 @@ ENDPROC(cpu_resume)
>  
>  #ifdef CONFIG_MMU
>  ENDPROC(cpu_resume_arm)
> +#endif
> +#ifdef CONFIG_MCPM
> +ENDPROC(cpu_resume_no_hyp)
>  #endif
>  
>  	.align 2
> -- 
> 2.17.1
> 
>
Marek Szyprowski Feb. 15, 2019, 10:23 a.m. UTC | #3
On 2019-02-14 17:58, Russell King - ARM Linux admin wrote:
> On Thu, Feb 14, 2019 at 03:31:14PM +0100, Marek Szyprowski wrote:
>> MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to
>> perform low-level platform initialization. This results in a try to install
>> HYP stubs for the second time for each CPU and results in false HYP/SVC
>> mode mismatch detection. The HYP stubs are already installed at the
>> beginning of the kernel initialization on the boot CPU (head.S) or in the
>> secondary_startup() for other CPUs. To fix this issue MCPM code should use
>> a cpu_resume() routine without HYP stubs installation.
>>
>> This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid
>> XU3/XU4/HC1 boards.
>>
>> Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> ---
>>  arch/arm/common/mcpm_entry.c   |  2 +-
>>  arch/arm/include/asm/suspend.h |  1 +
>>  arch/arm/kernel/sleep.S        | 11 +++++++++++
>>  3 files changed, 13 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
>> index ad574d20415c..1b1b82b37ce0 100644
>> --- a/arch/arm/common/mcpm_entry.c
>> +++ b/arch/arm/common/mcpm_entry.c
>> @@ -381,7 +381,7 @@ static int __init nocache_trampoline(unsigned long _arg)
>>  	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
>>  	phys_reset_t phys_reset;
>>  
>> -	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
>> +	mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
>>  	setup_mm_for_reboot();
>>  
>>  	__mcpm_cpu_going_down(cpu, cluster);
>> diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
>> index 452bbdcbcc83..506314265c6f 100644
>> --- a/arch/arm/include/asm/suspend.h
>> +++ b/arch/arm/include/asm/suspend.h
>> @@ -10,6 +10,7 @@ struct sleep_save_sp {
>>  };
>>  
>>  extern void cpu_resume(void);
>> +extern void cpu_resume_no_hyp(void);
>>  extern void cpu_resume_arm(void);
>>  extern int cpu_suspend(unsigned long, int (*)(unsigned long));
>>  
>> diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
>> index a8257fc9cf2a..b856d183691e 100644
>> --- a/arch/arm/kernel/sleep.S
>> +++ b/arch/arm/kernel/sleep.S
>> @@ -122,6 +122,11 @@ ENDPROC(cpu_resume_after_mmu)
>>  
>>  #ifdef CONFIG_MMU
>>  	.arm
>> +#ifdef CONFIG_MCPM
>> +ENTRY(cpu_resume_no_hyp)
>> +ARM_BE8(setend be)			@ ensure we are in BE mode
>> +	b	0f
> What if the kernel is built for Thumb?  You'll be branching to thumb
> code at the '0' label - don't you need to do the same that
> cpu_resume_arm does below?

Maybe yes, but I don't get how did it work so far. Current version of
the cpu_resume() doesn't check the CPU ARM/Thumb mode. Such version is
used by MCPM, blSwitcher and various suspend/resume code from
arch/arm/mach-*. The mode check is in the cpu_resume_arm(), which is
used only by two SoC drivers in drivers/soc). Does it mean that most of
the current cpu_resume() users are wrong?

I've didn't try building Thumb kernel so far to check that.

>> +#endif
>>  ENTRY(cpu_resume_arm)
>>   THUMB(	badr	r9, 1f		)	@ Kernel is entered in ARM.
>>   THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
>> @@ -135,6 +140,9 @@ ARM_BE8(setend be)			@ ensure we are in BE mode
>>  	bl	__hyp_stub_install_secondary
>>  #endif
>>  	safe_svcmode_maskall r1
>> +#ifdef CONFIG_MCPM
>> +0:
>> +#endif
> You don't need to conditionalise this.  I'd also use a symbol rather
> than a numeric label given that safe_svcmode_maskall is a macro that
> also uses numeric labels.

Okay.

>>  	mov	r1, #0
>>  	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
>>  	ALT_UP_B(1f)
>> @@ -163,6 +171,9 @@ ENDPROC(cpu_resume)
>>  
>>  #ifdef CONFIG_MMU
>>  ENDPROC(cpu_resume_arm)
>> +#endif
>> +#ifdef CONFIG_MCPM
>> +ENDPROC(cpu_resume_no_hyp)
>>  #endif
>>  
>>  	.align 2
>> -- 
>> 2.17.1

Best regards
Russell King (Oracle) Feb. 15, 2019, 10:33 a.m. UTC | #4
On Fri, Feb 15, 2019 at 11:23:28AM +0100, Marek Szyprowski wrote:
> 
> On 2019-02-14 17:58, Russell King - ARM Linux admin wrote:
> > On Thu, Feb 14, 2019 at 03:31:14PM +0100, Marek Szyprowski wrote:
> >> MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to
> >> perform low-level platform initialization. This results in a try to install
> >> HYP stubs for the second time for each CPU and results in false HYP/SVC
> >> mode mismatch detection. The HYP stubs are already installed at the
> >> beginning of the kernel initialization on the boot CPU (head.S) or in the
> >> secondary_startup() for other CPUs. To fix this issue MCPM code should use
> >> a cpu_resume() routine without HYP stubs installation.
> >>
> >> This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid
> >> XU3/XU4/HC1 boards.
> >>
> >> Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> >> ---
> >>  arch/arm/common/mcpm_entry.c   |  2 +-
> >>  arch/arm/include/asm/suspend.h |  1 +
> >>  arch/arm/kernel/sleep.S        | 11 +++++++++++
> >>  3 files changed, 13 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
> >> index ad574d20415c..1b1b82b37ce0 100644
> >> --- a/arch/arm/common/mcpm_entry.c
> >> +++ b/arch/arm/common/mcpm_entry.c
> >> @@ -381,7 +381,7 @@ static int __init nocache_trampoline(unsigned long _arg)
> >>  	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
> >>  	phys_reset_t phys_reset;
> >>  
> >> -	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
> >> +	mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
> >>  	setup_mm_for_reboot();
> >>  
> >>  	__mcpm_cpu_going_down(cpu, cluster);
> >> diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
> >> index 452bbdcbcc83..506314265c6f 100644
> >> --- a/arch/arm/include/asm/suspend.h
> >> +++ b/arch/arm/include/asm/suspend.h
> >> @@ -10,6 +10,7 @@ struct sleep_save_sp {
> >>  };
> >>  
> >>  extern void cpu_resume(void);
> >> +extern void cpu_resume_no_hyp(void);
> >>  extern void cpu_resume_arm(void);
> >>  extern int cpu_suspend(unsigned long, int (*)(unsigned long));
> >>  
> >> diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
> >> index a8257fc9cf2a..b856d183691e 100644
> >> --- a/arch/arm/kernel/sleep.S
> >> +++ b/arch/arm/kernel/sleep.S
> >> @@ -122,6 +122,11 @@ ENDPROC(cpu_resume_after_mmu)
> >>  
> >>  #ifdef CONFIG_MMU
> >>  	.arm
> >> +#ifdef CONFIG_MCPM
> >> +ENTRY(cpu_resume_no_hyp)
> >> +ARM_BE8(setend be)			@ ensure we are in BE mode
> >> +	b	0f
> > What if the kernel is built for Thumb?  You'll be branching to thumb
> > code at the '0' label - don't you need to do the same that
> > cpu_resume_arm does below?
> 
> Maybe yes, but I don't get how did it work so far. Current version of
> the cpu_resume() doesn't check the CPU ARM/Thumb mode. Such version is
> used by MCPM, blSwitcher and various suspend/resume code from
> arch/arm/mach-*. The mode check is in the cpu_resume_arm(), which is
> used only by two SoC drivers in drivers/soc). Does it mean that most of
> the current cpu_resume() users are wrong?

No, it means that the current cpu_resume users are aware whether they
are calling into Thumb code or not (via bit 0 of the address.)

This is not the case for the code you are introducing.  You are adding
code prefixed by .arm, and branching to code prefixed by .thumb.  The
branch instruction does not switch between ARM and Thumb mode.

> I've didn't try building Thumb kernel so far to check that.
> 
> >> +#endif
> >>  ENTRY(cpu_resume_arm)
> >>   THUMB(	badr	r9, 1f		)	@ Kernel is entered in ARM.
> >>   THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
> >> @@ -135,6 +140,9 @@ ARM_BE8(setend be)			@ ensure we are in BE mode
> >>  	bl	__hyp_stub_install_secondary
> >>  #endif
> >>  	safe_svcmode_maskall r1
> >> +#ifdef CONFIG_MCPM
> >> +0:
> >> +#endif
> > You don't need to conditionalise this.  I'd also use a symbol rather
> > than a numeric label given that safe_svcmode_maskall is a macro that
> > also uses numeric labels.
> 
> Okay.
> 
> >>  	mov	r1, #0
> >>  	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
> >>  	ALT_UP_B(1f)
> >> @@ -163,6 +171,9 @@ ENDPROC(cpu_resume)
> >>  
> >>  #ifdef CONFIG_MMU
> >>  ENDPROC(cpu_resume_arm)
> >> +#endif
> >> +#ifdef CONFIG_MCPM
> >> +ENDPROC(cpu_resume_no_hyp)
> >>  #endif
> >>  
> >>  	.align 2
> >> -- 
> >> 2.17.1
> 
> Best regards
> -- 
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
> 
>
diff mbox series

Patch

diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index ad574d20415c..1b1b82b37ce0 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -381,7 +381,7 @@  static int __init nocache_trampoline(unsigned long _arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	phys_reset_t phys_reset;
 
-	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
+	mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
 	setup_mm_for_reboot();
 
 	__mcpm_cpu_going_down(cpu, cluster);
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
index 452bbdcbcc83..506314265c6f 100644
--- a/arch/arm/include/asm/suspend.h
+++ b/arch/arm/include/asm/suspend.h
@@ -10,6 +10,7 @@  struct sleep_save_sp {
 };
 
 extern void cpu_resume(void);
+extern void cpu_resume_no_hyp(void);
 extern void cpu_resume_arm(void);
 extern int cpu_suspend(unsigned long, int (*)(unsigned long));
 
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index a8257fc9cf2a..b856d183691e 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -122,6 +122,11 @@  ENDPROC(cpu_resume_after_mmu)
 
 #ifdef CONFIG_MMU
 	.arm
+#ifdef CONFIG_MCPM
+ENTRY(cpu_resume_no_hyp)
+ARM_BE8(setend be)			@ ensure we are in BE mode
+	b	0f
+#endif
 ENTRY(cpu_resume_arm)
  THUMB(	badr	r9, 1f		)	@ Kernel is entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
@@ -135,6 +140,9 @@  ARM_BE8(setend be)			@ ensure we are in BE mode
 	bl	__hyp_stub_install_secondary
 #endif
 	safe_svcmode_maskall r1
+#ifdef CONFIG_MCPM
+0:
+#endif
 	mov	r1, #0
 	ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
 	ALT_UP_B(1f)
@@ -163,6 +171,9 @@  ENDPROC(cpu_resume)
 
 #ifdef CONFIG_MMU
 ENDPROC(cpu_resume_arm)
+#endif
+#ifdef CONFIG_MCPM
+ENDPROC(cpu_resume_no_hyp)
 #endif
 
 	.align 2