@@ -10,11 +10,32 @@ Required properties :
"qcom,mmcc-msm8960"
"qcom,mmcc-msm8974"
"qcom,mmcc-msm8996"
+ "qcom,mmcc-msm8998"
- reg : shall contain base register location and length
- #clock-cells : shall contain 1
- #reset-cells : shall contain 1
+For MSM8998 only:
+ - clocks: a list of phandles and clock-specifier pairs,
+ one for each entry in clock-names.
+ - clock-names: "xo" for the xo clock.
+ "gpll0" for the global pll 0 clock.
+ "dsi0dsi" for the dsi0 pll dsi clock (required if dsi is
+ enabled, optional otherwise).
+ "dsi0byte" for the dsi0 pll byte clock (required if dsi
+ is enabled, optional otherwise).
+ "dsi1dsi" for the dsi1 pll dsi clock (required if dsi is
+ enabled, optional otherwise).
+ "dsi1byte" for the dsi1 pll byte clock (required if dsi
+ is enabled, optional otherwise).
+ "hdmipll" for the hdmi pll clock (required if hdmi is
+ enabled, optional otherwise).
+ "dpvco" for the displayport pll vco clock (required if
+ dp is enabled, optional otherwise).
+ "dplink" for the displayport pll link clock (required if
+ dp is enabled, optional otherwise).
+
Optional properties :
- #power-domain-cells : shall contain 1
Document the multimedia clock controller found on MSM8998 Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> --- .../devicetree/bindings/clock/qcom,mmcc.txt | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)