@@ -13,6 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
/ {
model = "HiKey960";
@@ -196,6 +197,27 @@
method = "smc";
};
};
+
+ hisi_hikey_usb: hisi_hikey_usb {
+ compatible = "hisilicon,hikey960_usb";
+ typec-vbus-gpios = <&gpio25 2 0>;
+ typec-vbus-enable-val = <1>;
+ otg-switch-gpios = <&gpio25 6 0>;
+ hub-vdd33-en-gpios = <&gpio5 6 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbhub5734_pmx_func>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hikey_usb_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dwc3_role_switch_notify>;
+ };
+ };
+ };
+
};
/*
@@ -526,6 +548,38 @@
&i2c1 {
status = "okay";
+ rt1711h: rt1711h@4e {
+ compatible = "richtek,rt1711h";
+ reg = <0x4e>;
+ status = "ok";
+ interrupt-parent = <&gpio27>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_cfg_func>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 5000, 1000)>;
+ op-sink-microwatt = <10000000>;
+ };
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rt1711h_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dwc3_role_switch>;
+ };
+ };
+ };
+
adv7533: adv7533@39 {
status = "ok";
compatible = "adi,adv7533";
@@ -355,6 +355,12 @@
#clock-cells = <1>;
};
+ pmctrl: pmctrl@fff31000 {
+ compatible = "hisilicon,hi3660-pmctrl", "syscon";
+ reg = <0x0 0xfff31000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
pmuctrl: crg_ctrl@fff34000 {
compatible = "hisilicon,hi3660-pmuctrl", "syscon";
reg = <0x0 0xfff34000 0x0 0x1000>;
@@ -1134,5 +1140,72 @@
};
};
};
+
+ usb3_otg_bc: usb3_otg_bc@ff200000 {
+ compatible = "syscon";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+ };
+
+ usb_phy: usb-phy {
+ compatible = "hisilicon,hi3660-usb-phy";
+ #phy-cells = <0>;
+ hisilicon,pericrg-syscon = <&crg_ctrl>;
+ hisilicon,pctrl-syscon = <&pctrl>;
+ hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>;
+ hisilicon,eye-diagram-param = <0x22466e4>;
+ };
+
+ usb3: hisi_dwc3 {
+ compatible = "hisilicon,hi3660-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+ <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+
+ assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ assigned-clock-rates = <229000000>;
+ resets = <&crg_rst 0x90 8>,
+ <&crg_rst 0x90 7>,
+ <&crg_rst 0x90 6>,
+ <&crg_rst 0x90 5>;
+
+ dwc3: dwc3@ff100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff100000 0x0 0x100000>;
+ interrupts = <0 159 4>, <0 161 4>;
+ phys = <&usb_phy>;
+ phy-names = "usb3-phy";
+ dr_mode = "otg";
+ maximum-speed = "super-speed";
+ phy_type = "utmi";
+ snps,dis-del-phy-power-chg-quirk;
+ snps,lfps_filter_quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,tx_de_emphasis_quirk;
+ snps,tx_de_emphasis = <1>;
+ snps,dis_enblslpm_quirk;
+ snps,gctl-reset-quirk;
+ usb-role-switch;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dwc3_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&rt1711h_ep>;
+ };
+
+ dwc3_role_switch_notify: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hikey_usb_ep>;
+ };
+ };
+ };
+ };
};
};
This patch adds support for usb on Hikey960. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: John Stultz <john.stultz@linaro.org> Cc: Binghui Wang <wangbinghui@hisilicon.com> Signed-off-by: Yu Chen <chenyu56@huawei.com> --- v2: * Remove device_type property. * Add property "usb-role-switch". --- --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 54 +++++++++++++++++ arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 73 +++++++++++++++++++++++ 2 files changed, 127 insertions(+)