[v5,1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller
diff mbox series

Message ID 1550561795-31132-2-git-send-email-min.guo@mediatek.com
State New
Headers show
Series
  • Add MediaTek MUSB Controller Driver
Related show

Commit Message

Min Guo Feb. 19, 2019, 7:36 a.m. UTC
From: Min Guo <min.guo@mediatek.com>

This adds support for MediaTek musb controller in
host, peripheral and otg mode.

Signed-off-by: Min Guo <min.guo@mediatek.com>
---
changes in v5:
suggested by Rob:
1. Modify compatible as 
- compatible : should be one of:
               "mediatek,mt-2701"
               ...
               followed by "mediatek,mtk-musb"
2. Add usb connector child node

changes in v4:
suggested by Sergei:
1. String alignment

changes in v3:
1. no changes

changes in v2:
suggested by Bin:
1. Modify DRC to DRD
suggested by Rob:
2. Drop the "<soc-model>-musb" in compatible
3. Remove phy-names
4. Add space after comma in clock-names
---
 .../devicetree/bindings/usb/mediatek,musb.txt      | 54 ++++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt

Comments

Rob Herring Feb. 22, 2019, 4:49 p.m. UTC | #1
On Tue, Feb 19, 2019 at 03:36:30PM +0800, min.guo@mediatek.com wrote:
> From: Min Guo <min.guo@mediatek.com>
> 
> This adds support for MediaTek musb controller in
> host, peripheral and otg mode.
> 
> Signed-off-by: Min Guo <min.guo@mediatek.com>
> ---
> changes in v5:
> suggested by Rob:
> 1. Modify compatible as 
> - compatible : should be one of:
>                "mediatek,mt-2701"
>                ...
>                followed by "mediatek,mtk-musb"
> 2. Add usb connector child node
> 
> changes in v4:
> suggested by Sergei:
> 1. String alignment
> 
> changes in v3:
> 1. no changes
> 
> changes in v2:
> suggested by Bin:
> 1. Modify DRC to DRD
> suggested by Rob:
> 2. Drop the "<soc-model>-musb" in compatible
> 3. Remove phy-names
> 4. Add space after comma in clock-names
> ---
>  .../devicetree/bindings/usb/mediatek,musb.txt      | 54 ++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> new file mode 100644
> index 0000000..0632e6e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> @@ -0,0 +1,54 @@
> +MediaTek musb DRD/OTG controller
> +-------------------------------------------
> +
> +Required properties:
> + - compatible      : should be one of:
> +                     "mediatek,mt-2701"

That looks like a top-level SoC compatible and doesn't match the 
example.

> +                     ...
> +                     followed by "mediatek,mtk-musb"
> + - reg             : specifies physical base address and size of
> +                     the registers
> + - interrupts      : interrupt used by musb controller
> + - interrupt-names : must be "mc"

Not much point in a name when there is only 1.

> + - phys            : PHY specifier for the OTG phy
> + - dr_mode         : should be one of "host", "peripheral" or "otg",
> +                     refer to usb/generic.txt
> + - clocks          : a list of phandle + clock-specifier pairs, one for
> +                     each entry in clock-names
> + - clock-names     : must contain "main", "mcu", "univpll"
> +                     for clocks of controller
> +
> +Optional properties:
> + - power-domains   : a phandle to USB power domain node to control USB's
> +                     MTCMOS
> +
> +Required child nodes:
> + usb connector node as defined in bindings/connector/usb-connector.txt
> + - extcon          : for VBUS and ID pin changes detection, needed when
> +                     supports dual-role mode
> + - vbus-supply     : reference to the VBUS regulator, needed when supports
> +                     dual-role mode
> +
> +Example:
> +
> +usb2: usb@11200000 {
> +	compatible = "mediatek,mt2701-musb",
> +		     "mediatek,mtk-musb";
> +	reg = <0 0x11200000 0 0x1000>;
> +	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
> +	interrupt-names = "mc";
> +	phys = <&u2port2 PHY_TYPE_USB2>;
> +	dr_mode = "otg";
> +	clocks = <&pericfg CLK_PERI_USB0>,
> +		 <&pericfg CLK_PERI_USB0_MCU>,
> +		 <&pericfg CLK_PERI_USB_SLV>;
> +	clock-names = "main","mcu","univpll";
> +	power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
> +	usb_con: connector{
> +		compatible = "usb-b-connector";
> +		label = "micro-USB";
> +		type = "micro";
> +		extcon = <&extcon_usb>;

The connector node should replace 'extcon'. Add what you need here 
directly (e.g. id-gpios). What you add needs to be defined in 
usb-connector.txt.

> +		vbus-supply = <&usb_vbus>;
> +	};
> +};
> -- 
> 1.9.1
>
Min Guo Feb. 23, 2019, 3:04 a.m. UTC | #2
On Fri, 2019-02-22 at 10:49 -0600, Rob Herring wrote:
> On Tue, Feb 19, 2019 at 03:36:30PM +0800, min.guo@mediatek.com wrote:
> > From: Min Guo <min.guo@mediatek.com>
> > 
> > This adds support for MediaTek musb controller in
> > host, peripheral and otg mode.
> > 
> > Signed-off-by: Min Guo <min.guo@mediatek.com>
> > ---
> > changes in v5:
> > suggested by Rob:
> > 1. Modify compatible as 
> > - compatible : should be one of:
> >                "mediatek,mt-2701"
> >                ...
> >                followed by "mediatek,mtk-musb"
> > 2. Add usb connector child node
> > 
> > changes in v4:
> > suggested by Sergei:
> > 1. String alignment
> > 
> > changes in v3:
> > 1. no changes
> > 
> > changes in v2:
> > suggested by Bin:
> > 1. Modify DRC to DRD
> > suggested by Rob:
> > 2. Drop the "<soc-model>-musb" in compatible
> > 3. Remove phy-names
> > 4. Add space after comma in clock-names
> > ---
> >  .../devicetree/bindings/usb/mediatek,musb.txt      | 54 ++++++++++++++++++++++
> >  1 file changed, 54 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > new file mode 100644
> > index 0000000..0632e6e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > @@ -0,0 +1,54 @@
> > +MediaTek musb DRD/OTG controller
> > +-------------------------------------------
> > +
> > +Required properties:
> > + - compatible      : should be one of:
> > +                     "mediatek,mt-2701"
> 
> That looks like a top-level SoC compatible and doesn't match the 
> example.
"mediatek,mt-2701" is an example, just to describe a specific SOC.
May I modify compatibel like:
compatible : should be "mediatek,mtk-musb"

> > +                     ...
> > +                     followed by "mediatek,mtk-musb"
> > + - reg             : specifies physical base address and size of
> > +                     the registers
> > + - interrupts      : interrupt used by musb controller
> > + - interrupt-names : must be "mc"
> 
> Not much point in a name when there is only 1.
The MUSB core driver has two interrupts, one is for MAC, another for
DMA, but on MTK platform, there is only a MAC interrupt, musb core
driver uses platform_get_irq_byname(pdev, "mc") to get this interrupt
number.

> > + - phys            : PHY specifier for the OTG phy
> > + - dr_mode         : should be one of "host", "peripheral" or "otg",
> > +                     refer to usb/generic.txt
> > + - clocks          : a list of phandle + clock-specifier pairs, one for
> > +                     each entry in clock-names
> > + - clock-names     : must contain "main", "mcu", "univpll"
> > +                     for clocks of controller
> > +
> > +Optional properties:
> > + - power-domains   : a phandle to USB power domain node to control USB's
> > +                     MTCMOS
> > +
> > +Required child nodes:
> > + usb connector node as defined in bindings/connector/usb-connector.txt
> > + - extcon          : for VBUS and ID pin changes detection, needed when
> > +                     supports dual-role mode
> > + - vbus-supply     : reference to the VBUS regulator, needed when supports
> > +                     dual-role mode
> > +
> > +Example:
> > +
> > +usb2: usb@11200000 {
> > +	compatible = "mediatek,mt2701-musb",
> > +		     "mediatek,mtk-musb";
> > +	reg = <0 0x11200000 0 0x1000>;
> > +	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
> > +	interrupt-names = "mc";
> > +	phys = <&u2port2 PHY_TYPE_USB2>;
> > +	dr_mode = "otg";
> > +	clocks = <&pericfg CLK_PERI_USB0>,
> > +		 <&pericfg CLK_PERI_USB0_MCU>,
> > +		 <&pericfg CLK_PERI_USB_SLV>;
> > +	clock-names = "main","mcu","univpll";
> > +	power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
> > +	usb_con: connector{
> > +		compatible = "usb-b-connector";
> > +		label = "micro-USB";
> > +		type = "micro";
> > +		extcon = <&extcon_usb>;
> 
> The connector node should replace 'extcon'. Add what you need here 
> directly (e.g. id-gpios). What you add needs to be defined in 
> usb-connector.txt.
OK.

> > +		vbus-supply = <&usb_vbus>;
> > +	};
> > +};
> > -- 
> > 1.9.1
> >
Min Guo Feb. 25, 2019, 1:36 a.m. UTC | #3
Hi Rob,
On Fri, 2019-02-22 at 10:49 -0600, Rob Herring wrote:
> On Tue, Feb 19, 2019 at 03:36:30PM +0800, min.guo@mediatek.com wrote:
> > From: Min Guo <min.guo@mediatek.com>
> > 
> > This adds support for MediaTek musb controller in
> > host, peripheral and otg mode.
> > 
> > Signed-off-by: Min Guo <min.guo@mediatek.com>
> > ---
> > changes in v5:
> > suggested by Rob:
> > 1. Modify compatible as 
> > - compatible : should be one of:
> >                "mediatek,mt-2701"
> >                ...
> >                followed by "mediatek,mtk-musb"
> > 2. Add usb connector child node
> > 
> > changes in v4:
> > suggested by Sergei:
> > 1. String alignment
> > 
> > changes in v3:
> > 1. no changes
> > 
> > changes in v2:
> > suggested by Bin:
> > 1. Modify DRC to DRD
> > suggested by Rob:
> > 2. Drop the "<soc-model>-musb" in compatible
> > 3. Remove phy-names
> > 4. Add space after comma in clock-names
> > ---
> >  .../devicetree/bindings/usb/mediatek,musb.txt      | 54 ++++++++++++++++++++++
> >  1 file changed, 54 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > new file mode 100644
> > index 0000000..0632e6e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > @@ -0,0 +1,54 @@
> > +MediaTek musb DRD/OTG controller
> > +-------------------------------------------
> > +
> > +Required properties:
> > + - compatible      : should be one of:
> > +                     "mediatek,mt-2701"
> 
> That looks like a top-level SoC compatible and doesn't match the 
> example.
"mediatek,mt-2701" is an example, just to describe a specific SOC.
May I modify compatibel like:
compatible : should be "mediatek,mtk-musb"

> > +                     ...
> > +                     followed by "mediatek,mtk-musb"
> > + - reg             : specifies physical base address and size of
> > +                     the registers
> > + - interrupts      : interrupt used by musb controller
> > + - interrupt-names : must be "mc"
> 
> Not much point in a name when there is only 1.
The MUSB core driver has two interrupts, one is for MAC, another for
DMA, but on MTK platform, there is only a MAC interrupt, musb core
driver uses platform_get_irq_byname(pdev, "mc") to get this interrupt
number.

> > + - phys            : PHY specifier for the OTG phy
> > + - dr_mode         : should be one of "host", "peripheral" or "otg",
> > +                     refer to usb/generic.txt
> > + - clocks          : a list of phandle + clock-specifier pairs, one for
> > +                     each entry in clock-names
> > + - clock-names     : must contain "main", "mcu", "univpll"
> > +                     for clocks of controller
> > +
> > +Optional properties:
> > + - power-domains   : a phandle to USB power domain node to control USB's
> > +                     MTCMOS
> > +
> > +Required child nodes:
> > + usb connector node as defined in bindings/connector/usb-connector.txt
> > + - extcon          : for VBUS and ID pin changes detection, needed when
> > +                     supports dual-role mode
> > + - vbus-supply     : reference to the VBUS regulator, needed when supports
> > +                     dual-role mode
> > +
> > +Example:
> > +
> > +usb2: usb@11200000 {
> > +	compatible = "mediatek,mt2701-musb",
> > +		     "mediatek,mtk-musb";
> > +	reg = <0 0x11200000 0 0x1000>;
> > +	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
> > +	interrupt-names = "mc";
> > +	phys = <&u2port2 PHY_TYPE_USB2>;
> > +	dr_mode = "otg";
> > +	clocks = <&pericfg CLK_PERI_USB0>,
> > +		 <&pericfg CLK_PERI_USB0_MCU>,
> > +		 <&pericfg CLK_PERI_USB_SLV>;
> > +	clock-names = "main","mcu","univpll";
> > +	power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
> > +	usb_con: connector{
> > +		compatible = "usb-b-connector";
> > +		label = "micro-USB";
> > +		type = "micro";
> > +		extcon = <&extcon_usb>;
> 
> The connector node should replace 'extcon'. Add what you need here 
> directly (e.g. id-gpios). What you add needs to be defined in 
> usb-connector.txt.
OK.

> > +		vbus-supply = <&usb_vbus>;
> > +	};
> > +};
> > -- 
> > 1.9.1
> > 

Regards,
Min.
Rob Herring March 4, 2019, 5:42 p.m. UTC | #4
On Sun, Feb 24, 2019 at 7:36 PM Min Guo <min.guo@mediatek.com> wrote:
>
> Hi Rob,
> On Fri, 2019-02-22 at 10:49 -0600, Rob Herring wrote:
> > On Tue, Feb 19, 2019 at 03:36:30PM +0800, min.guo@mediatek.com wrote:
> > > From: Min Guo <min.guo@mediatek.com>
> > >
> > > This adds support for MediaTek musb controller in
> > > host, peripheral and otg mode.
> > >
> > > Signed-off-by: Min Guo <min.guo@mediatek.com>
> > > ---
> > > changes in v5:
> > > suggested by Rob:
> > > 1. Modify compatible as
> > > - compatible : should be one of:
> > >                "mediatek,mt-2701"
> > >                ...
> > >                followed by "mediatek,mtk-musb"
> > > 2. Add usb connector child node
> > >
> > > changes in v4:
> > > suggested by Sergei:
> > > 1. String alignment
> > >
> > > changes in v3:
> > > 1. no changes
> > >
> > > changes in v2:
> > > suggested by Bin:
> > > 1. Modify DRC to DRD
> > > suggested by Rob:
> > > 2. Drop the "<soc-model>-musb" in compatible
> > > 3. Remove phy-names
> > > 4. Add space after comma in clock-names
> > > ---
> > >  .../devicetree/bindings/usb/mediatek,musb.txt      | 54 ++++++++++++++++++++++
> > >  1 file changed, 54 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > > new file mode 100644
> > > index 0000000..0632e6e
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > > @@ -0,0 +1,54 @@
> > > +MediaTek musb DRD/OTG controller
> > > +-------------------------------------------
> > > +
> > > +Required properties:
> > > + - compatible      : should be one of:
> > > +                     "mediatek,mt-2701"
> >
> > That looks like a top-level SoC compatible and doesn't match the
> > example.
> "mediatek,mt-2701" is an example, just to describe a specific SOC.
> May I modify compatibel like:
> compatible : should be "mediatek,mtk-musb"

No, you should fix the example adding "mediatek,mtk-musb".

Rob
Min Guo March 5, 2019, 1:19 a.m. UTC | #5
Hi Rob,

On Mon, 2019-03-04 at 11:42 -0600, Rob Herring wrote:
> On Sun, Feb 24, 2019 at 7:36 PM Min Guo <min.guo@mediatek.com> wrote:
> >
> > Hi Rob,
> > On Fri, 2019-02-22 at 10:49 -0600, Rob Herring wrote:
> > > On Tue, Feb 19, 2019 at 03:36:30PM +0800, min.guo@mediatek.com wrote:
> > > > From: Min Guo <min.guo@mediatek.com>
> > > >
> > > > This adds support for MediaTek musb controller in
> > > > host, peripheral and otg mode.
> > > >
> > > > Signed-off-by: Min Guo <min.guo@mediatek.com>
> > > > ---
> > > > changes in v5:
> > > > suggested by Rob:
> > > > 1. Modify compatible as
> > > > - compatible : should be one of:
> > > >                "mediatek,mt-2701"
> > > >                ...
> > > >                followed by "mediatek,mtk-musb"
> > > > 2. Add usb connector child node
> > > >
> > > > changes in v4:
> > > > suggested by Sergei:
> > > > 1. String alignment
> > > >
> > > > changes in v3:
> > > > 1. no changes
> > > >
> > > > changes in v2:
> > > > suggested by Bin:
> > > > 1. Modify DRC to DRD
> > > > suggested by Rob:
> > > > 2. Drop the "<soc-model>-musb" in compatible
> > > > 3. Remove phy-names
> > > > 4. Add space after comma in clock-names
> > > > ---
> > > >  .../devicetree/bindings/usb/mediatek,musb.txt      | 54 ++++++++++++++++++++++
> > > >  1 file changed, 54 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > > > new file mode 100644
> > > > index 0000000..0632e6e
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
> > > > @@ -0,0 +1,54 @@
> > > > +MediaTek musb DRD/OTG controller
> > > > +-------------------------------------------
> > > > +
> > > > +Required properties:
> > > > + - compatible      : should be one of:
> > > > +                     "mediatek,mt-2701"
> > >
> > > That looks like a top-level SoC compatible and doesn't match the
> > > example.
> > "mediatek,mt-2701" is an example, just to describe a specific SOC.
> > May I modify compatibel like:
> > compatible : should be "mediatek,mtk-musb"
> 
> No, you should fix the example adding "mediatek,mtk-musb".
OK.

> Rob

Regards,
Min.

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
new file mode 100644
index 0000000..0632e6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
@@ -0,0 +1,54 @@ 
+MediaTek musb DRD/OTG controller
+-------------------------------------------
+
+Required properties:
+ - compatible      : should be one of:
+                     "mediatek,mt-2701"
+                     ...
+                     followed by "mediatek,mtk-musb"
+ - reg             : specifies physical base address and size of
+                     the registers
+ - interrupts      : interrupt used by musb controller
+ - interrupt-names : must be "mc"
+ - phys            : PHY specifier for the OTG phy
+ - dr_mode         : should be one of "host", "peripheral" or "otg",
+                     refer to usb/generic.txt
+ - clocks          : a list of phandle + clock-specifier pairs, one for
+                     each entry in clock-names
+ - clock-names     : must contain "main", "mcu", "univpll"
+                     for clocks of controller
+
+Optional properties:
+ - power-domains   : a phandle to USB power domain node to control USB's
+                     MTCMOS
+
+Required child nodes:
+ usb connector node as defined in bindings/connector/usb-connector.txt
+ - extcon          : for VBUS and ID pin changes detection, needed when
+                     supports dual-role mode
+ - vbus-supply     : reference to the VBUS regulator, needed when supports
+                     dual-role mode
+
+Example:
+
+usb2: usb@11200000 {
+	compatible = "mediatek,mt2701-musb",
+		     "mediatek,mtk-musb";
+	reg = <0 0x11200000 0 0x1000>;
+	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	interrupt-names = "mc";
+	phys = <&u2port2 PHY_TYPE_USB2>;
+	dr_mode = "otg";
+	clocks = <&pericfg CLK_PERI_USB0>,
+		 <&pericfg CLK_PERI_USB0_MCU>,
+		 <&pericfg CLK_PERI_USB_SLV>;
+	clock-names = "main","mcu","univpll";
+	power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+	usb_con: connector{
+		compatible = "usb-b-connector";
+		label = "micro-USB";
+		type = "micro";
+		extcon = <&extcon_usb>;
+		vbus-supply = <&usb_vbus>;
+	};
+};