[V2,6/8] dt-bindings: net: stmmac: add syscfg clock property
diff mbox series

Message ID 1550824089-19961-7-git-send-email-christophe.roullier@st.com
State New
Headers show
Series
  • stmmac: add some fixes for stm32
Related show

Commit Message

Christophe ROULLIER Feb. 22, 2019, 8:28 a.m. UTC
Need syscfg clock for MCU family in case bootloader does not
activate it.

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
---
 Documentation/devicetree/bindings/net/stm32-dwmac.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Rob Herring Feb. 23, 2019, 12:19 a.m. UTC | #1
On Fri, 22 Feb 2019 09:28:07 +0100, Christophe Roullier wrote:
> Need syscfg clock for MCU family in case bootloader does not
> activate it.
> 
> Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
> ---
>  Documentation/devicetree/bindings/net/stm32-dwmac.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
index f42dc68..524f8a0 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
@@ -14,8 +14,8 @@  Required properties:
 - clock-names: Should be "stmmaceth" for the host clock.
 	       Should be "mac-clk-tx" for the MAC TX clock.
 	       Should be "mac-clk-rx" for the MAC RX clock.
-	       For MPU family need to add also "ethstp" for power mode clock and,
-	                                       "syscfg-clk" for SYSCFG clock.
+	       Should be "syscfg-clk" for the SYSCFG clock.
+	       For MPU family need to add also "ethstp" for power mode clock
 - interrupt-names: Should contain a list of interrupt names corresponding to
            the interrupts in the interrupts property, if available.
 		   Should be "macirq" for the main MAC IRQ