ARM: dts: exynos: Add pin configuration for read strobe for Odroid XU3/XU4 eMMC
diff mbox series

Message ID 20190222101948.848-1-linux.amoon@gmail.com
State New
Headers show
Series
  • ARM: dts: exynos: Add pin configuration for read strobe for Odroid XU3/XU4 eMMC
Related show

Commit Message

Anand Moon Feb. 22, 2019, 10:19 a.m. UTC
Add Read Strobe RDQS pin configuration for eMMC to support higher data rate read/write.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm/boot/dts/exynos5420-pinctrl.dtsi          | 6 ++++++
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
 2 files changed, 7 insertions(+), 1 deletion(-)

Comments

Marek Szyprowski Feb. 22, 2019, 10:29 a.m. UTC | #1
Hi Anand,

On 2019-02-22 11:19, Anand Moon wrote:
> Add Read Strobe RDQS pin configuration for eMMC to support higher data rate read/write.
>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
>  arch/arm/boot/dts/exynos5420-pinctrl.dtsi          | 6 ++++++
>  arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
>  2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> index b82af7c89654..4fb3865e082a 100644
> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> @@ -206,6 +206,12 @@
>  		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
>  	};
>  
> +	sd0_rdqs: sd0-rdqs {
> +		samsung,pins = "gpc0-7";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> +	};
> +

The above lines are not needed. There is already a sd0_rclk node with
exactly the same configuration just above your change.

>  	sd1_clk: sd1-clk {
>  		samsung,pins = "gpc1-0";
>  		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index b299e541cac0..d41397748ed2 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -411,7 +411,7 @@
>  	samsung,dw-mshc-hs400-timing = <0 2>;
>  	samsung,read-strobe-delay = <90>;
>  	pinctrl-names = "default";
> -	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
> +	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
>  	bus-width = <8>;
>  	cap-mmc-highspeed;
>  	mmc-hs200-1_8v;

Best regards
Anand Moon Feb. 22, 2019, 10:33 a.m. UTC | #2
Hi Marek,

On Fri, 22 Feb 2019 at 15:59, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>
> Hi Anand,
>
> On 2019-02-22 11:19, Anand Moon wrote:
> > Add Read Strobe RDQS pin configuration for eMMC to support higher data rate read/write.
> >
> > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > ---
> >  arch/arm/boot/dts/exynos5420-pinctrl.dtsi          | 6 ++++++
> >  arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
> >  2 files changed, 7 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> > index b82af7c89654..4fb3865e082a 100644
> > --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> > +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> > @@ -206,6 +206,12 @@
> >               samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
> >       };
> >
> > +     sd0_rdqs: sd0-rdqs {
> > +             samsung,pins = "gpc0-7";
> > +             samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> > +             samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> > +     };
> > +
>
> The above lines are not needed. There is already a sd0_rclk node with
> exactly the same configuration just above your change.
>

Sorry once again, I failed to look closely., sorry for the noise.

Best Regards
-Anand

> >       sd1_clk: sd1-clk {
> >               samsung,pins = "gpc1-0";
> >               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> > index b299e541cac0..d41397748ed2 100644
> > --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> > @@ -411,7 +411,7 @@
> >       samsung,dw-mshc-hs400-timing = <0 2>;
> >       samsung,read-strobe-delay = <90>;
> >       pinctrl-names = "default";
> > -     pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
> > +     pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
> >       bus-width = <8>;
> >       cap-mmc-highspeed;
> >       mmc-hs200-1_8v;
>
> Best regards
> --
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
>

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index b82af7c89654..4fb3865e082a 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -206,6 +206,12 @@ 
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpc0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpc1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index b299e541cac0..d41397748ed2 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -411,7 +411,7 @@ 
 	samsung,dw-mshc-hs400-timing = <0 2>;
 	samsung,read-strobe-delay = <90>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;