[v5,2/5] dt-bindings: i2c: Add Mediatek MT8183 i2c binding
diff mbox series

Message ID 1551186660-16902-3-git-send-email-qii.wang@mediatek.com
State New
Headers show
Series
  • add i2c support for mt8183
Related show

Commit Message

Qii Wang Feb. 26, 2019, 1:10 p.m. UTC
Add MT8183 i2c binding to binding file. Compare to MT2712 i2c
controller, MT8183 has different registers, offsets, and clock.

Signed-off-by: Qii Wang <qii.wang@mediatek.com>
---
 Documentation/devicetree/bindings/i2c/i2c-mtk.txt |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Rob Herring Feb. 26, 2019, 4:41 p.m. UTC | #1
On Tue, Feb 26, 2019 at 09:10:57PM +0800, Qii Wang wrote:
> Add MT8183 i2c binding to binding file. Compare to MT2712 i2c
> controller, MT8183 has different registers, offsets, and clock.
> 
> Signed-off-by: Qii Wang <qii.wang@mediatek.com>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-mtk.txt |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)

Reviewed-by: Rob Herring <robh@kernel.org>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
index ee4c324..b052f29 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
@@ -12,13 +12,15 @@  Required properties:
       "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
       "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
       "mediatek,mt8173-i2c": for MediaTek MT8173
+      "mediatek,mt8183-i2c": for MediaTek MT8183
   - reg: physical base address of the controller and dma base, length of memory
     mapped region.
   - interrupts: interrupt number to the cpu.
   - clock-div: the fixed value for frequency divider of clock source in i2c
     module. Each IC may be different.
   - clocks: clock name from clock manager
-  - clock-names: Must include "main" and "dma", if enable have-pmic need include
+  - clock-names: Must include "main" and "dma", "arb" is for multi-master that
+    one bus has more than two i2c controllers, if enable have-pmic need include
     "pmic" extra.
 
 Optional properties: