diff mbox series

[v9,5/5] drm/sun4i: sun6i_mipi_dsi: Simplify dsi setup timings code

Message ID 20190303173527.31055-6-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series drm/sun4i: sun6i_mipi_dsi: Fixes/updates | expand

Commit Message

Jagan Teki March 3, 2019, 5:35 p.m. UTC
DSI timings are varies between burst/non-burst devices and
current driver is handling this support via if, else statements
which would difficult to read.

Simplify it by using goto to make code more readable.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
---
Note: This change is created based on previous version burst
changes [1] by addressing comment from [2] by Maxime to make
code readable. 

[1] https://patchwork.kernel.org/cover/10813623/
[2] https://patchwork.kernel.org/patch/10666607/

 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 79 ++++++++++++++------------
 1 file changed, 42 insertions(+), 37 deletions(-)

Comments

Maxime Ripard March 4, 2019, 3:50 p.m. UTC | #1
On Sun, Mar 03, 2019 at 11:05:27PM +0530, Jagan Teki wrote:
> DSI timings are varies between burst/non-burst devices and
> current driver is handling this support via if, else statements
> which would difficult to read.
> 
> Simplify it by using goto to make code more readable.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Tested-by: Merlijn Wajer <merlijn@wizzup.org>
> ---
> Note: This change is created based on previous version burst
> changes [1] by addressing comment from [2] by Maxime to make
> code readable. 
> 
> [1] https://patchwork.kernel.org/cover/10813623/
> [2] https://patchwork.kernel.org/patch/10666607/
> 
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 79 ++++++++++++++------------
>  1 file changed, 42 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index 31ec4048804d..898f32319c2d 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -550,7 +550,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
>  {
>  	struct mipi_dsi_device *device = dsi->device;
>  	unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
> -	u16 hbp = 0, hfp = 0, hsa = 0, hblk = 0, vblk = 0;
> +	u16 hbp, hfp, hsa, hblk;
> +	u16 vblk = 0;
>  	u32 basic_ctl = 0;
>  	size_t bytes;
>  	u8 *buffer;
> @@ -558,6 +559,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
>  	/* Do all timing calculations up front to allocate buffer space */
>  
>  	if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
> +		hbp = hfp = hsa = 0;

This raises a checkpatch warning and isn't necessary

>  		hblk = mode->hdisplay * Bpp;
>  		basic_ctl = SUN6I_DSI_BASIC_CTL_VIDEO_BURST |
>  			    SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS |
> @@ -566,48 +568,51 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
>  		if (device->lanes == 4)
>  			basic_ctl |= SUN6I_DSI_BASIC_CTL_TRAIL_FILL |
>  				     SUN6I_DSI_BASIC_CTL_TRAIL_INV(0xc);
> -	} else {
> -		/*
> -		 * A sync period is composed of a blanking packet (4
> -		 * bytes + payload + 2 bytes) and a sync event packet
> -		 * (4 bytes). Its minimal size is therefore 10 bytes
> -		 */
> +
> +		goto alloc_buf;

And I'd rather not have a goto in the middle of the code for no
particular reason.

Maxime
Jagan Teki March 7, 2019, 11:46 a.m. UTC | #2
On Mon, Mar 4, 2019 at 9:20 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> On Sun, Mar 03, 2019 at 11:05:27PM +0530, Jagan Teki wrote:
> > DSI timings are varies between burst/non-burst devices and
> > current driver is handling this support via if, else statements
> > which would difficult to read.
> >
> > Simplify it by using goto to make code more readable.
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > Tested-by: Merlijn Wajer <merlijn@wizzup.org>
> > ---
> > Note: This change is created based on previous version burst
> > changes [1] by addressing comment from [2] by Maxime to make
> > code readable.
> >
> > [1] https://patchwork.kernel.org/cover/10813623/
> > [2] https://patchwork.kernel.org/patch/10666607/
> >
> >  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 79 ++++++++++++++------------
> >  1 file changed, 42 insertions(+), 37 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > index 31ec4048804d..898f32319c2d 100644
> > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > @@ -550,7 +550,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> >  {
> >       struct mipi_dsi_device *device = dsi->device;
> >       unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
> > -     u16 hbp = 0, hfp = 0, hsa = 0, hblk = 0, vblk = 0;
> > +     u16 hbp, hfp, hsa, hblk;
> > +     u16 vblk = 0;
> >       u32 basic_ctl = 0;
> >       size_t bytes;
> >       u8 *buffer;
> > @@ -558,6 +559,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> >       /* Do all timing calculations up front to allocate buffer space */
> >
> >       if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
> > +             hbp = hfp = hsa = 0;
>
> This raises a checkpatch warning and isn't necessary
>
> >               hblk = mode->hdisplay * Bpp;
> >               basic_ctl = SUN6I_DSI_BASIC_CTL_VIDEO_BURST |
> >                           SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS |
> > @@ -566,48 +568,51 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> >               if (device->lanes == 4)
> >                       basic_ctl |= SUN6I_DSI_BASIC_CTL_TRAIL_FILL |
> >                                    SUN6I_DSI_BASIC_CTL_TRAIL_INV(0xc);
> > -     } else {
> > -             /*
> > -              * A sync period is composed of a blanking packet (4
> > -              * bytes + payload + 2 bytes) and a sync event packet
> > -              * (4 bytes). Its minimal size is therefore 10 bytes
> > -              */
> > +
> > +             goto alloc_buf;
>
> And I'd rather not have a goto in the middle of the code for no
> particular reason.

OK, will try to think for better simplification otherwise will drop it
in next version.
diff mbox series

Patch

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 31ec4048804d..898f32319c2d 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -550,7 +550,8 @@  static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
 {
 	struct mipi_dsi_device *device = dsi->device;
 	unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
-	u16 hbp = 0, hfp = 0, hsa = 0, hblk = 0, vblk = 0;
+	u16 hbp, hfp, hsa, hblk;
+	u16 vblk = 0;
 	u32 basic_ctl = 0;
 	size_t bytes;
 	u8 *buffer;
@@ -558,6 +559,7 @@  static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
 	/* Do all timing calculations up front to allocate buffer space */
 
 	if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
+		hbp = hfp = hsa = 0;
 		hblk = mode->hdisplay * Bpp;
 		basic_ctl = SUN6I_DSI_BASIC_CTL_VIDEO_BURST |
 			    SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS |
@@ -566,48 +568,51 @@  static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
 		if (device->lanes == 4)
 			basic_ctl |= SUN6I_DSI_BASIC_CTL_TRAIL_FILL |
 				     SUN6I_DSI_BASIC_CTL_TRAIL_INV(0xc);
-	} else {
-		/*
-		 * A sync period is composed of a blanking packet (4
-		 * bytes + payload + 2 bytes) and a sync event packet
-		 * (4 bytes). Its minimal size is therefore 10 bytes
-		 */
+
+		goto alloc_buf;
+	}
+
+	/*
+	 * A sync period is composed of a blanking packet (4
+	 * bytes + payload + 2 bytes) and a sync event packet
+	 * (4 bytes). Its minimal size is therefore 10 bytes
+	 */
 #define HSA_PACKET_OVERHEAD	10
-		hsa = max((unsigned int)HSA_PACKET_OVERHEAD,
-			  (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD);
-
-		/*
-		 * The backporch is set using a blanking packet (4
-		 * bytes + payload + 2 bytes). Its minimal size is
-		 * therefore 6 bytes
-		 */
+	hsa = max((unsigned int)HSA_PACKET_OVERHEAD,
+		  (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD);
+
+	/*
+	 * The backporch is set using a blanking packet (4
+	 * bytes + payload + 2 bytes). Its minimal size is
+	 * therefore 6 bytes
+	 */
 #define HBP_PACKET_OVERHEAD	6
-		hbp = max((unsigned int)HBP_PACKET_OVERHEAD,
-			  (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD);
-
-		/*
-		 * The frontporch is set using a blanking packet (4
-		 * bytes + payload + 2 bytes). Its minimal size is
-		 * therefore 6 bytes
-		 */
+	hbp = max((unsigned int)HBP_PACKET_OVERHEAD,
+		  (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD);
+
+	/*
+	 * The frontporch is set using a blanking packet (4
+	 * bytes + payload + 2 bytes). Its minimal size is
+	 * therefore 6 bytes
+	 */
 #define HFP_PACKET_OVERHEAD	6
-		hfp = max((unsigned int)HFP_PACKET_OVERHEAD,
-			  (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD);
-
-		/*
-		 * The blanking is set using a sync event (4 bytes)
-		 * and a blanking packet (4 bytes + payload + 2
-		 * bytes). Its minimal size is therefore 10 bytes.
-		 */
+	hfp = max((unsigned int)HFP_PACKET_OVERHEAD,
+		  (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD);
+
+	/*
+	 * The blanking is set using a sync event (4 bytes)
+	 * and a blanking packet (4 bytes + payload + 2
+	 * bytes). Its minimal size is therefore 10 bytes.
+	 */
 #define HBLK_PACKET_OVERHEAD	10
-		hblk = max((unsigned int)HBLK_PACKET_OVERHEAD,
-			   (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp -
-			   HBLK_PACKET_OVERHEAD);
+	hblk = max((unsigned int)HBLK_PACKET_OVERHEAD,
+		   (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp -
+		   HBLK_PACKET_OVERHEAD);
 
-		if (device->lanes == 4)
-			vblk = sun6i_dsi_get_timings_vblk(dsi, mode, hblk);
-	}
+	if (device->lanes == 4)
+		vblk = sun6i_dsi_get_timings_vblk(dsi, mode, hblk);
 
+alloc_buf:
 	/* How many bytes do we need to send all payloads? */
 	bytes = max_t(size_t, max(max(hfp, hblk), max(hsa, hbp)), vblk);
 	buffer = kmalloc(bytes, GFP_KERNEL);