diff mbox series

[2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status

Message ID 20190305055628.11826-2-dirk.behme@de.bosch.com (mailing list archive)
State Superseded
Headers show
Series [v2,1/2] dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid | expand

Commit Message

Dirk Behme March 5, 2019, 5:56 a.m. UTC
From: Achim Dahlhoff <Achim.Dahlhoff@de.bosch.com>

The tx_status poll in the rcar_dmac driver reads the status register
which indicates which chunk is busy (DMACHCRB). Afterwards the point
inside the chunk is read from DMATCRB. It is possible that the chunk
has changed between the two reads. The result is a non-monotonous
increase of the residue. Fix this by introducing a 'safe read' logic.

Fixes: 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue")
Signed-off-by: Achim Dahlhoff <Achim.Dahlhoff@de.bosch.com>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Cc: <stable@vger.kernel.org> # v4.16+
---
Note: Patch done against mainline v5.0

Changes in v2: Switch goto/retry to for loop

 drivers/dma/sh/rcar-dmac.c | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

Comments

Dirk Behme April 1, 2019, 12:47 p.m. UTC | #1
Hi Renesas SoC team,

On 05.03.2019 06:56, Dirk Behme wrote:
> From: Achim Dahlhoff <Achim.Dahlhoff@de.bosch.com>
> 
> The tx_status poll in the rcar_dmac driver reads the status register
> which indicates which chunk is busy (DMACHCRB). Afterwards the point
> inside the chunk is read from DMATCRB. It is possible that the chunk
> has changed between the two reads. The result is a non-monotonous
> increase of the residue. Fix this by introducing a 'safe read' logic.
> 
> Fixes: 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue")
> Signed-off-by: Achim Dahlhoff <Achim.Dahlhoff@de.bosch.com>
> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
> Cc: <stable@vger.kernel.org> # v4.16+
> ---
> Note: Patch done against mainline v5.0
> 
> Changes in v2: Switch goto/retry to for loop


Any status update on this and the first fix

[PATCH v2 1/2] dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid

?

I still think they are required to fix the rcar-dmac driver.

Best regards

Dirk


>   drivers/dma/sh/rcar-dmac.c | 26 +++++++++++++++++++++++---
>   1 file changed, 23 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
> index 2ea59229d7f5..cceddc7099b0 100644
> --- a/drivers/dma/sh/rcar-dmac.c
> +++ b/drivers/dma/sh/rcar-dmac.c
> @@ -1282,6 +1282,9 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
>   	enum dma_status status;
>   	unsigned int residue = 0;
>   	unsigned int dptr = 0;
> +	unsigned int chcrb;
> +	unsigned int tcrb;
> +	unsigned int i;
>   
>   	if (!desc)
>   		return 0;
> @@ -1329,6 +1332,24 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
>   		return 0;
>   	}
>   
> +	/*
> +	 * We need to read two registers.
> +	 * Make sure the control register does not skip to next chunk
> +	 * while reading the counter.
> +	 * Trying it 3 times should be enough: Initial read, retry, retry
> +	 * for the paranoid.
> +	 */
> +	for (i = 0; i < 3; i++) {
> +		chcrb = rcar_dmac_chan_read(chan, RCAR_DMACHCRB) &
> +					    RCAR_DMACHCRB_DPTR_MASK;
> +		tcrb = rcar_dmac_chan_read(chan, RCAR_DMATCRB);
> +		/* Still the same? */
> +		if (chcrb == (rcar_dmac_chan_read(chan, RCAR_DMACHCRB) &
> +			      RCAR_DMACHCRB_DPTR_MASK))
> +			break;
> +	}
> +	WARN_ONCE(i >= 3, "residue might be not continuous!");
> +
>   	/*
>   	 * In descriptor mode the descriptor running pointer is not maintained
>   	 * by the interrupt handler, find the running descriptor from the
> @@ -1336,8 +1357,7 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
>   	 * mode just use the running descriptor pointer.
>   	 */
>   	if (desc->hwdescs.use) {
> -		dptr = (rcar_dmac_chan_read(chan, RCAR_DMACHCRB) &
> -			RCAR_DMACHCRB_DPTR_MASK) >> RCAR_DMACHCRB_DPTR_SHIFT;
> +		dptr = chcrb >> RCAR_DMACHCRB_DPTR_SHIFT;
>   		if (dptr == 0)
>   			dptr = desc->nchunks;
>   		dptr--;
> @@ -1355,7 +1375,7 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
>   	}
>   
>   	/* Add the residue for the current chunk. */
> -	residue += rcar_dmac_chan_read(chan, RCAR_DMATCRB) << desc->xfer_shift;
> +	residue += tcrb << desc->xfer_shift;
>   
>   	return residue;
>   }
diff mbox series

Patch

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 2ea59229d7f5..cceddc7099b0 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -1282,6 +1282,9 @@  static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
 	enum dma_status status;
 	unsigned int residue = 0;
 	unsigned int dptr = 0;
+	unsigned int chcrb;
+	unsigned int tcrb;
+	unsigned int i;
 
 	if (!desc)
 		return 0;
@@ -1329,6 +1332,24 @@  static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
 		return 0;
 	}
 
+	/*
+	 * We need to read two registers.
+	 * Make sure the control register does not skip to next chunk
+	 * while reading the counter.
+	 * Trying it 3 times should be enough: Initial read, retry, retry
+	 * for the paranoid.
+	 */
+	for (i = 0; i < 3; i++) {
+		chcrb = rcar_dmac_chan_read(chan, RCAR_DMACHCRB) &
+					    RCAR_DMACHCRB_DPTR_MASK;
+		tcrb = rcar_dmac_chan_read(chan, RCAR_DMATCRB);
+		/* Still the same? */
+		if (chcrb == (rcar_dmac_chan_read(chan, RCAR_DMACHCRB) &
+			      RCAR_DMACHCRB_DPTR_MASK))
+			break;
+	}
+	WARN_ONCE(i >= 3, "residue might be not continuous!");
+
 	/*
 	 * In descriptor mode the descriptor running pointer is not maintained
 	 * by the interrupt handler, find the running descriptor from the
@@ -1336,8 +1357,7 @@  static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
 	 * mode just use the running descriptor pointer.
 	 */
 	if (desc->hwdescs.use) {
-		dptr = (rcar_dmac_chan_read(chan, RCAR_DMACHCRB) &
-			RCAR_DMACHCRB_DPTR_MASK) >> RCAR_DMACHCRB_DPTR_SHIFT;
+		dptr = chcrb >> RCAR_DMACHCRB_DPTR_SHIFT;
 		if (dptr == 0)
 			dptr = desc->nchunks;
 		dptr--;
@@ -1355,7 +1375,7 @@  static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
 	}
 
 	/* Add the residue for the current chunk. */
-	residue += rcar_dmac_chan_read(chan, RCAR_DMATCRB) << desc->xfer_shift;
+	residue += tcrb << desc->xfer_shift;
 
 	return residue;
 }