[v4,4/4] dt-bindings: display: rockchip: add document for rk3066 hdmi
diff mbox series

Message ID 20190306224113.24853-5-jbx6244@gmail.com
State New
Headers show
Series
  • Enable rk3066 VOP and HDMI for MK808
Related show

Commit Message

Johan Jonker March 6, 2019, 10:41 p.m. UTC
This patch adds a binding that describes the HDMI controller for
rk3066.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 .../display/rockchip/rockchip,rk3066-hdmi.txt      | 72 ++++++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt

Comments

Rob Herring March 11, 2019, 10:54 p.m. UTC | #1
On Wed,  6 Mar 2019 23:41:13 +0100, Johan Jonker wrote:
> This patch adds a binding that describes the HDMI controller for
> rk3066.
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
>  .../display/rockchip/rockchip,rk3066-hdmi.txt      | 72 ++++++++++++++++++++++
>  1 file changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt
new file mode 100644
index 000000000..d1ad31bca
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt
@@ -0,0 +1,72 @@ 
+Rockchip specific extensions for rk3066 HDMI
+============================================
+
+Required properties:
+- compatible:
+	"rockchip,rk3066-hdmi";
+- reg:
+	Physical base address and length of the controller's registers.
+- clocks, clock-names:
+	Phandle to HDMI controller clock, name should be "hclk".
+- interrupts:
+	HDMI interrupt number.
+- power-domains:
+	Phandle to the RK3066_PD_VIO power domain.
+- rockchip,grf:
+	This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
+- ports:
+	Contains one port node with two endpoints, numbered 0 and 1,
+	connected respectively to vop0 and vop1.
+	Contains one port node with one endpoint
+	connected to a hdmi-connector node.
+- pinctrl-0, pinctrl-name:
+	Switch the iomux for the HPD/I2C pins to HDMI function.
+
+Example:
+	hdmi: hdmi@10116000 {
+		compatible = "rockchip,rk3066-hdmi";
+		reg = <0x10116000 0x2000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HDMI>;
+		clock-names = "hclk";
+		power-domains = <&power RK3066_PD_VIO>;
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				hdmi_in_vop0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vop0_out_hdmi>;
+				};
+				hdmi_in_vop1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vop1_out_hdmi>;
+				};
+			};
+			hdmi_out: port@1 {
+				reg = <1>;
+				hdmi_out_con: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+		};
+	};
+
+&pinctrl {
+		hdmi {
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+			};
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+						<0 RK_PA2 1 &pcfg_pull_none>;
+			};
+		};
+};