| Message ID | 20190315021940.86905-2-wangkefeng.wang@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | fix issue when acpi smmuv3 device alloc offline node memory | expand |
On 15/03/2019 02:19, Kefeng Wang wrote: > If there is only node 0 in system, but smmuv3 device is set to offline > node 1, parsed from proximity domain in SMMUv3 IORT table, it will lead > to following crash, Surely that's just a firmware bug? If node 1 doesn't exist in the system then AFAICS if we're presented with a device claiming to be on that node we can only assume the whole thing is bogus. Thus if we're going to work around it at all, it seems to me like we should reject the entire device rather than just bodging it to some other node. Robin. > > [ 47.492451] Unable to handle kernel paging request at virtual address 0000000000001388 > [ 47.500361] Mem abort info: > [ 47.503143] ESR = 0x96000004 > [ 47.506189] Exception class = DABT (current EL), IL = 32 bits > [ 47.512099] SET = 0, FnV = 0 > [ 47.515140] EA = 0, S1PTW = 0 > [ 47.518272] Data abort info: > [ 47.521144] ISV = 0, ISS = 0x00000004 > [ 47.524970] CM = 0, WnR = 0 > [ 47.527929] [0000000000001388] user address but active_mm is swapper > [ 47.534285] Internal error: Oops: 96000004 [#1] SMP > [ 47.539151] Modules linked in: > [ 47.542194] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 > [ 47.549490] pstate: 80c00009 (Nzcv daif +PAN +UAO) > [ 47.554272] pc : __alloc_pages_nodemask+0x13c/0x1068 > [ 47.559224] lr : __alloc_pages_nodemask+0xdc/0x1068 > ... > [ 47.646873] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) > [ 47.653560] Call trace: > [ 47.655994] __alloc_pages_nodemask+0x13c/0x1068 > [ 47.660600] new_slab+0xec/0x570 > [ 47.663816] ___slab_alloc+0x3e0/0x4f8 > [ 47.667553] __slab_alloc+0x60/0x80 > [ 47.671029] __kmalloc_node_track_caller+0x10c/0x478 > [ 47.675984] devm_kmalloc+0x44/0xb0 > [ 47.679460] pinctrl_bind_pins+0x4c/0x188 > [ 47.683457] really_probe+0x78/0x2b8 > [ 47.687019] driver_probe_device+0x64/0x110 > [ 47.691189] device_driver_attach+0x74/0x98 > [ 47.695360] __driver_attach+0x9c/0xe8 > [ 47.699095] bus_for_each_dev+0x84/0xd8 > [ 47.702919] driver_attach+0x30/0x40 > [ 47.706481] bus_add_driver+0x170/0x218 > [ 47.710304] driver_register+0x64/0x118 > [ 47.714128] __platform_driver_register+0x54/0x60 > [ 47.718820] arm_smmu_driver_init+0x24/0x2c > [ 47.722991] do_one_initcall+0xbc/0x328 > [ 47.726816] kernel_init_freeable+0x304/0x3ac > [ 47.731162] kernel_init+0x18/0x110 > [ 47.734638] ret_from_fork+0x10/0x1c > [ 47.738202] Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) > [ 47.744307] ---[ end trace dfeaed4c373a32da ]-- > > Using acpi_map_pxm_to_online_node() to get online node to fix it. > > Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> > --- > drivers/acpi/arm64/iort.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > index e48894e002ba..a2ce836ec103 100644 > --- a/drivers/acpi/arm64/iort.c > +++ b/drivers/acpi/arm64/iort.c > @@ -1239,10 +1239,10 @@ static void __init arm_smmu_v3_set_proximity(struct device *dev, > > smmu = (struct acpi_iort_smmu_v3 *)node->node_data; > if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) { > - set_dev_node(dev, acpi_map_pxm_to_node(smmu->pxm)); > - pr_info("SMMU-v3[%llx] Mapped to Proximity domain %d\n", > - smmu->base_address, > - smmu->pxm); > + int node = acpi_map_pxm_to_online_node(smmu->pxm); > + set_dev_node(dev, node); > + pr_info("SMMU-v3[%llx] -> PXM %d -> Node %d\n", > + smmu->base_address, smmu->pxm, node); > } > } > #else >
On Wed, Mar 20, 2019 at 11:41:18AM +0000, Robin Murphy wrote: > On 15/03/2019 02:19, Kefeng Wang wrote: > >If there is only node 0 in system, but smmuv3 device is set to offline > >node 1, parsed from proximity domain in SMMUv3 IORT table, it will lead > >to following crash, > > Surely that's just a firmware bug? If node 1 doesn't exist in the system > then AFAICS if we're presented with a device claiming to be on that node we > can only assume the whole thing is bogus. Thus if we're going to work around > it at all, it seems to me like we should reject the entire device rather > than just bodging it to some other node. I suspect that's the same issue this thread addressed: https://lore.kernel.org/linux-pci/CAErSpo6S0qtR42tjGZrFu4aMFFyThx1hkHTSowTt6t3XerpHnA@mail.gmail.com/ Lorenzo > Robin. > > > > >[ 47.492451] Unable to handle kernel paging request at virtual address 0000000000001388 > >[ 47.500361] Mem abort info: > >[ 47.503143] ESR = 0x96000004 > >[ 47.506189] Exception class = DABT (current EL), IL = 32 bits > >[ 47.512099] SET = 0, FnV = 0 > >[ 47.515140] EA = 0, S1PTW = 0 > >[ 47.518272] Data abort info: > >[ 47.521144] ISV = 0, ISS = 0x00000004 > >[ 47.524970] CM = 0, WnR = 0 > >[ 47.527929] [0000000000001388] user address but active_mm is swapper > >[ 47.534285] Internal error: Oops: 96000004 [#1] SMP > >[ 47.539151] Modules linked in: > >[ 47.542194] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 > >[ 47.549490] pstate: 80c00009 (Nzcv daif +PAN +UAO) > >[ 47.554272] pc : __alloc_pages_nodemask+0x13c/0x1068 > >[ 47.559224] lr : __alloc_pages_nodemask+0xdc/0x1068 > >... > >[ 47.646873] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) > >[ 47.653560] Call trace: > >[ 47.655994] __alloc_pages_nodemask+0x13c/0x1068 > >[ 47.660600] new_slab+0xec/0x570 > >[ 47.663816] ___slab_alloc+0x3e0/0x4f8 > >[ 47.667553] __slab_alloc+0x60/0x80 > >[ 47.671029] __kmalloc_node_track_caller+0x10c/0x478 > >[ 47.675984] devm_kmalloc+0x44/0xb0 > >[ 47.679460] pinctrl_bind_pins+0x4c/0x188 > >[ 47.683457] really_probe+0x78/0x2b8 > >[ 47.687019] driver_probe_device+0x64/0x110 > >[ 47.691189] device_driver_attach+0x74/0x98 > >[ 47.695360] __driver_attach+0x9c/0xe8 > >[ 47.699095] bus_for_each_dev+0x84/0xd8 > >[ 47.702919] driver_attach+0x30/0x40 > >[ 47.706481] bus_add_driver+0x170/0x218 > >[ 47.710304] driver_register+0x64/0x118 > >[ 47.714128] __platform_driver_register+0x54/0x60 > >[ 47.718820] arm_smmu_driver_init+0x24/0x2c > >[ 47.722991] do_one_initcall+0xbc/0x328 > >[ 47.726816] kernel_init_freeable+0x304/0x3ac > >[ 47.731162] kernel_init+0x18/0x110 > >[ 47.734638] ret_from_fork+0x10/0x1c > >[ 47.738202] Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) > >[ 47.744307] ---[ end trace dfeaed4c373a32da ]-- > > > >Using acpi_map_pxm_to_online_node() to get online node to fix it. > > > >Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> > >--- > > drivers/acpi/arm64/iort.c | 8 ++++---- > > 1 file changed, 4 insertions(+), 4 deletions(-) > > > >diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > >index e48894e002ba..a2ce836ec103 100644 > >--- a/drivers/acpi/arm64/iort.c > >+++ b/drivers/acpi/arm64/iort.c > >@@ -1239,10 +1239,10 @@ static void __init arm_smmu_v3_set_proximity(struct device *dev, > > smmu = (struct acpi_iort_smmu_v3 *)node->node_data; > > if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) { > >- set_dev_node(dev, acpi_map_pxm_to_node(smmu->pxm)); > >- pr_info("SMMU-v3[%llx] Mapped to Proximity domain %d\n", > >- smmu->base_address, > >- smmu->pxm); > >+ int node = acpi_map_pxm_to_online_node(smmu->pxm); > >+ set_dev_node(dev, node); > >+ pr_info("SMMU-v3[%llx] -> PXM %d -> Node %d\n", > >+ smmu->base_address, smmu->pxm, node); > > } > > } > > #else > >
On 2019/3/20 22:00, Lorenzo Pieralisi wrote: > On Wed, Mar 20, 2019 at 11:41:18AM +0000, Robin Murphy wrote: >> On 15/03/2019 02:19, Kefeng Wang wrote: >>> If there is only node 0 in system, but smmuv3 device is set to offline >>> node 1, parsed from proximity domain in SMMUv3 IORT table, it will lead >>> to following crash, >> Surely that's just a firmware bug? If node 1 doesn't exist in the system >> then AFAICS if we're presented with a device claiming to be on that node we >> can only assume the whole thing is bogus. Thus if we're going to work around >> it at all, it seems to me like we should reject the entire device rather >> than just bodging it to some other node. Yes, I met this oops with a wrong IORT configuration, > I suspect that's the same issue this thread addressed: > > https://lore.kernel.org/linux-pci/CAErSpo6S0qtR42tjGZrFu4aMFFyThx1hkHTSowTt6t3XerpHnA@mail.gmail.com/ and the situation mentioned above should will trigger this issue too. If the node is offline, we can just return from arm_smmu_v3_set_proximity(), any better way to fix this? > Lorenzo > >> Robin. >> >>> [ 47.492451] Unable to handle kernel paging request at virtual address 0000000000001388 >>> [ 47.500361] Mem abort info: >>> [ 47.503143] ESR = 0x96000004 >>> [ 47.506189] Exception class = DABT (current EL), IL = 32 bits >>> [ 47.512099] SET = 0, FnV = 0 >>> [ 47.515140] EA = 0, S1PTW = 0 >>> [ 47.518272] Data abort info: >>> [ 47.521144] ISV = 0, ISS = 0x00000004 >>> [ 47.524970] CM = 0, WnR = 0 >>> [ 47.527929] [0000000000001388] user address but active_mm is swapper >>> [ 47.534285] Internal error: Oops: 96000004 [#1] SMP >>> [ 47.539151] Modules linked in: >>> [ 47.542194] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 >>> [ 47.549490] pstate: 80c00009 (Nzcv daif +PAN +UAO) >>> [ 47.554272] pc : __alloc_pages_nodemask+0x13c/0x1068 >>> [ 47.559224] lr : __alloc_pages_nodemask+0xdc/0x1068 >>> ... >>> [ 47.646873] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) >>> [ 47.653560] Call trace: >>> [ 47.655994] __alloc_pages_nodemask+0x13c/0x1068 >>> [ 47.660600] new_slab+0xec/0x570 >>> [ 47.663816] ___slab_alloc+0x3e0/0x4f8 >>> [ 47.667553] __slab_alloc+0x60/0x80 >>> [ 47.671029] __kmalloc_node_track_caller+0x10c/0x478 >>> [ 47.675984] devm_kmalloc+0x44/0xb0 >>> [ 47.679460] pinctrl_bind_pins+0x4c/0x188 >>> [ 47.683457] really_probe+0x78/0x2b8 >>> [ 47.687019] driver_probe_device+0x64/0x110 >>> [ 47.691189] device_driver_attach+0x74/0x98 >>> [ 47.695360] __driver_attach+0x9c/0xe8 >>> [ 47.699095] bus_for_each_dev+0x84/0xd8 >>> [ 47.702919] driver_attach+0x30/0x40 >>> [ 47.706481] bus_add_driver+0x170/0x218 >>> [ 47.710304] driver_register+0x64/0x118 >>> [ 47.714128] __platform_driver_register+0x54/0x60 >>> [ 47.718820] arm_smmu_driver_init+0x24/0x2c >>> [ 47.722991] do_one_initcall+0xbc/0x328 >>> [ 47.726816] kernel_init_freeable+0x304/0x3ac >>> [ 47.731162] kernel_init+0x18/0x110 >>> [ 47.734638] ret_from_fork+0x10/0x1c >>> [ 47.738202] Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) >>> [ 47.744307] ---[ end trace dfeaed4c373a32da ]-- >>> >>> Using acpi_map_pxm_to_online_node() to get online node to fix it. >>> >>> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> >>> --- >>> drivers/acpi/arm64/iort.c | 8 ++++---- >>> 1 file changed, 4 insertions(+), 4 deletions(-) >>> >>> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c >>> index e48894e002ba..a2ce836ec103 100644 >>> --- a/drivers/acpi/arm64/iort.c >>> +++ b/drivers/acpi/arm64/iort.c >>> @@ -1239,10 +1239,10 @@ static void __init arm_smmu_v3_set_proximity(struct device *dev, >>> smmu = (struct acpi_iort_smmu_v3 *)node->node_data; >>> if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) { >>> - set_dev_node(dev, acpi_map_pxm_to_node(smmu->pxm)); >>> - pr_info("SMMU-v3[%llx] Mapped to Proximity domain %d\n", >>> - smmu->base_address, >>> - smmu->pxm); >>> + int node = acpi_map_pxm_to_online_node(smmu->pxm); >>> + set_dev_node(dev, node); >>> + pr_info("SMMU-v3[%llx] -> PXM %d -> Node %d\n", >>> + smmu->base_address, smmu->pxm, node); >>> } >>> } >>> #else >>> > . >
Kindly ping, thanks. On 2019/3/21 14:08, Kefeng Wang wrote: > On 2019/3/20 22:00, Lorenzo Pieralisi wrote: >> On Wed, Mar 20, 2019 at 11:41:18AM +0000, Robin Murphy wrote: >>> On 15/03/2019 02:19, Kefeng Wang wrote: >>>> If there is only node 0 in system, but smmuv3 device is set to offline >>>> node 1, parsed from proximity domain in SMMUv3 IORT table, it will lead >>>> to following crash, >>> Surely that's just a firmware bug? If node 1 doesn't exist in the system >>> then AFAICS if we're presented with a device claiming to be on that node we >>> can only assume the whole thing is bogus. Thus if we're going to work around >>> it at all, it seems to me like we should reject the entire device rather >>> than just bodging it to some other node. > Yes, I met this oops with a wrong IORT configuration, > >> I suspect that's the same issue this thread addressed: >> >> https://lore.kernel.org/linux-pci/CAErSpo6S0qtR42tjGZrFu4aMFFyThx1hkHTSowTt6t3XerpHnA@mail.gmail.com/ > and the situation mentioned above should will trigger this issue too. > > If the node is offline, we can just return from arm_smmu_v3_set_proximity(), any better way to fix this? > >
On Thu, Mar 21, 2019 at 02:08:47PM +0800, Kefeng Wang wrote: > > On 2019/3/20 22:00, Lorenzo Pieralisi wrote: > > On Wed, Mar 20, 2019 at 11:41:18AM +0000, Robin Murphy wrote: > >> On 15/03/2019 02:19, Kefeng Wang wrote: > >>> If there is only node 0 in system, but smmuv3 device is set to offline > >>> node 1, parsed from proximity domain in SMMUv3 IORT table, it will lead > >>> to following crash, > >> Surely that's just a firmware bug? If node 1 doesn't exist in the system > >> then AFAICS if we're presented with a device claiming to be on that node we > >> can only assume the whole thing is bogus. Thus if we're going to work around > >> it at all, it seems to me like we should reject the entire device rather > >> than just bodging it to some other node. > > Yes, I met this oops with a wrong IORT configuration, > > > I suspect that's the same issue this thread addressed: > > > > https://lore.kernel.org/linux-pci/CAErSpo6S0qtR42tjGZrFu4aMFFyThx1hkHTSowTt6t3XerpHnA@mail.gmail.com/ > > and the situation mentioned above should will trigger this issue too. > > If the node is offline, we can just return from > arm_smmu_v3_set_proximity(), any better way to fix this? Add a return value to the set_promixity() callback and return failure on hitting the issue above, therefore terminating device creation. Thanks, Lorenzo
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index e48894e002ba..a2ce836ec103 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -1239,10 +1239,10 @@ static void __init arm_smmu_v3_set_proximity(struct device *dev, smmu = (struct acpi_iort_smmu_v3 *)node->node_data; if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) { - set_dev_node(dev, acpi_map_pxm_to_node(smmu->pxm)); - pr_info("SMMU-v3[%llx] Mapped to Proximity domain %d\n", - smmu->base_address, - smmu->pxm); + int node = acpi_map_pxm_to_online_node(smmu->pxm); + set_dev_node(dev, node); + pr_info("SMMU-v3[%llx] -> PXM %d -> Node %d\n", + smmu->base_address, smmu->pxm, node); } } #else
If there is only node 0 in system, but smmuv3 device is set to offline node 1, parsed from proximity domain in SMMUv3 IORT table, it will lead to following crash, [ 47.492451] Unable to handle kernel paging request at virtual address 0000000000001388 [ 47.500361] Mem abort info: [ 47.503143] ESR = 0x96000004 [ 47.506189] Exception class = DABT (current EL), IL = 32 bits [ 47.512099] SET = 0, FnV = 0 [ 47.515140] EA = 0, S1PTW = 0 [ 47.518272] Data abort info: [ 47.521144] ISV = 0, ISS = 0x00000004 [ 47.524970] CM = 0, WnR = 0 [ 47.527929] [0000000000001388] user address but active_mm is swapper [ 47.534285] Internal error: Oops: 96000004 [#1] SMP [ 47.539151] Modules linked in: [ 47.542194] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 [ 47.549490] pstate: 80c00009 (Nzcv daif +PAN +UAO) [ 47.554272] pc : __alloc_pages_nodemask+0x13c/0x1068 [ 47.559224] lr : __alloc_pages_nodemask+0xdc/0x1068 ... [ 47.646873] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) [ 47.653560] Call trace: [ 47.655994] __alloc_pages_nodemask+0x13c/0x1068 [ 47.660600] new_slab+0xec/0x570 [ 47.663816] ___slab_alloc+0x3e0/0x4f8 [ 47.667553] __slab_alloc+0x60/0x80 [ 47.671029] __kmalloc_node_track_caller+0x10c/0x478 [ 47.675984] devm_kmalloc+0x44/0xb0 [ 47.679460] pinctrl_bind_pins+0x4c/0x188 [ 47.683457] really_probe+0x78/0x2b8 [ 47.687019] driver_probe_device+0x64/0x110 [ 47.691189] device_driver_attach+0x74/0x98 [ 47.695360] __driver_attach+0x9c/0xe8 [ 47.699095] bus_for_each_dev+0x84/0xd8 [ 47.702919] driver_attach+0x30/0x40 [ 47.706481] bus_add_driver+0x170/0x218 [ 47.710304] driver_register+0x64/0x118 [ 47.714128] __platform_driver_register+0x54/0x60 [ 47.718820] arm_smmu_driver_init+0x24/0x2c [ 47.722991] do_one_initcall+0xbc/0x328 [ 47.726816] kernel_init_freeable+0x304/0x3ac [ 47.731162] kernel_init+0x18/0x110 [ 47.734638] ret_from_fork+0x10/0x1c [ 47.738202] Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) [ 47.744307] ---[ end trace dfeaed4c373a32da ]-- Using acpi_map_pxm_to_online_node() to get online node to fix it. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> --- drivers/acpi/arm64/iort.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)