[v19,09/27] x86/sgx: Add ENCLS architectural error codes
diff mbox series

Message ID 20190317211456.13927-10-jarkko.sakkinen@linux.intel.com
State New
Headers show
Series
  • Intel SGX1 support
Related show

Commit Message

Jarkko Sakkinen March 17, 2019, 9:14 p.m. UTC
The SGX architecture defines an extensive set of error codes that are
used by ENCL{S,U,V} instructions to provide software with (somewhat)
precise error information.  Though they are architectural, define the
known error codes in a separate file from sgx_arch.h so that they can
be exposed to userspace.  For some ENCLS leafs, e.g. EINIT, returning
the exact error code on failure can enable userspace to make informed
decisions when an operation fails.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
 arch/x86/include/uapi/asm/sgx_errno.h | 91 +++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)
 create mode 100644 arch/x86/include/uapi/asm/sgx_errno.h

Patch
diff mbox series

diff --git a/arch/x86/include/uapi/asm/sgx_errno.h b/arch/x86/include/uapi/asm/sgx_errno.h
new file mode 100644
index 000000000000..48b87aed58d7
--- /dev/null
+++ b/arch/x86/include/uapi/asm/sgx_errno.h
@@ -0,0 +1,91 @@ 
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright(c) 2018 Intel Corporation.
+ *
+ * Contains the architecturally defined error codes that are returned by SGX
+ * instructions, e.g. ENCLS, and may be propagated to userspace via errno.
+ */
+
+#ifndef _UAPI_ASM_X86_SGX_ERRNO_H
+#define _UAPI_ASM_X86_SGX_ERRNO_H
+
+/**
+ * enum sgx_encls_leaves - return codes for ENCLS, ENCLU and ENCLV
+ * %SGX_SUCCESS:		No error.
+ * %SGX_INVALID_SIG_STRUCT:	SIGSTRUCT contains an invalid value.
+ * %SGX_INVALID_ATTRIBUTE:	Enclave is not attempting to access a resource
+ *				for which it is not authorized.
+ * %SGX_BLKSTATE:		EPC page is already blocked.
+ * %SGX_INVALID_MEASUREMENT:	SIGSTRUCT or EINITTOKEN contains an incorrect
+ *				measurement.
+ * %SGX_NOTBLOCKABLE:		EPC page type is not one which can be blocked.
+ * %SGX_PG_INVLD:		EPC page is invalid (and cannot be blocked).
+ * %SGX_EPC_PAGE_CONFLICT:	EPC page in use by another SGX instruction.
+ * %SGX_INVALID_SIGNATURE:	Enclave's signature does not validate with
+ *				public key enclosed in SIGSTRUCT.
+ * %SGX_MAC_COMPARE_FAIL:	MAC check failed when reloading EPC page.
+ * %SGX_PAGE_NOT_BLOCKED:	EPC page is not marked as blocked.
+ * %SGX_NOT_TRACKED:		ETRACK has not been completed on the EPC page.
+ * %SGX_VA_SLOT_OCCUPIED:	Version array slot contains a valid entry.
+ * %SGX_CHILD_PRESENT:		Enclave has child pages present in the EPC.
+ * %SGX_ENCLAVE_ACT:		Logical processors are currently executing
+ *				inside the enclave.
+ * %SGX_ENTRYEPOCH_LOCKED:	SECS locked for EPOCH update, i.e. an ETRACK is
+ *				currently executing on the SECS.
+ * %SGX_INVALID_EINITTOKEN:	EINITTOKEN is invalid and enclave signer's
+ *				public key does not match IA32_SGXLEPUBKEYHASH.
+ * %SGX_PREV_TRK_INCMPL:	All processors did not complete the previous
+ *				tracking sequence.
+ * %SGX_PG_IS_SECS:		Target EPC page is an SECS and cannot be
+ *				blocked.
+ * %SGX_PAGE_ATTRIBUTES_MISMATCH:	Attributes of the EPC page do not match
+ *					the expected values.
+ * %SGX_PAGE_NOT_MODIFIABLE:	EPC page cannot be modified because it is in
+ *				the PENDING or MODIFIED state.
+ * %SGX_PAGE_NOT_DEBUGGABLE:	EPC page cannot be modified because it is in
+ *				the PENDING or MODIFIED state.
+ * %SGX_INVALID_COUNTER:	{In,De}crementing a counter would cause it to
+ *				{over,under}flow.
+ * %SGX_PG_NONEPC:		Target page is not an EPC page.
+ * %SGX_TRACK_NOT_REQUIRED:	Target page type does not require tracking.
+ * %SGX_INVALID_CPUSVN:		Security version number reported by CPU is less
+ *				than what is required by the enclave.
+ * %SGX_INVALID_ISVSVN:		Security version number of enclave is less than
+ *				what is required by the KEYREQUEST struct.
+ * %SGX_UNMASKED_EVENT:		An unmasked event, e.g. INTR, was received
+ *				while the instruction was executing.
+ * %SGX_INVALID_KEYNAME:	Requested key is not supported by hardware.
+ */
+enum sgx_return_codes {
+	SGX_SUCCESS			= 0,
+	SGX_INVALID_SIG_STRUCT		= 1,
+	SGX_INVALID_ATTRIBUTE		= 2,
+	SGX_BLKSTATE			= 3,
+	SGX_INVALID_MEASUREMENT		= 4,
+	SGX_NOTBLOCKABLE		= 5,
+	SGX_PG_INVLD			= 6,
+	SGX_EPC_PAGE_CONFLICT		= 7,
+	SGX_INVALID_SIGNATURE		= 8,
+	SGX_MAC_COMPARE_FAIL		= 9,
+	SGX_PAGE_NOT_BLOCKED		= 10,
+	SGX_NOT_TRACKED			= 11,
+	SGX_VA_SLOT_OCCUPIED		= 12,
+	SGX_CHILD_PRESENT		= 13,
+	SGX_ENCLAVE_ACT			= 14,
+	SGX_ENTRYEPOCH_LOCKED		= 15,
+	SGX_INVALID_EINITTOKEN		= 16,
+	SGX_PREV_TRK_INCMPL		= 17,
+	SGX_PG_IS_SECS			= 18,
+	SGX_PAGE_ATTRIBUTES_MISMATCH	= 19,
+	SGX_PAGE_NOT_MODIFIABLE		= 20,
+	SGX_PAGE_NOT_DEBUGGABLE		= 21,
+	SGX_INVALID_COUNTER		= 25,
+	SGX_PG_NONEPC			= 26,
+	SGX_TRACK_NOT_REQUIRED		= 27,
+	SGX_INVALID_CPUSVN		= 32,
+	SGX_INVALID_ISVSVN		= 64,
+	SGX_UNMASKED_EVENT		= 128,
+	SGX_INVALID_KEYNAME		= 256,
+};
+
+#endif /* _UAPI_ASM_X86_SGX_ERRNO_H */