[4/4] pinctrl: add drive for I2C related pins on MT8183
diff mbox series

Message ID 20190325122302.5483-5-zhiyong.tao@mediatek.com
State New
Headers show
Series
  • PINCTRL: Mediatek pinctrl patch on mt8183
Related show

Commit Message

Zhiyong Tao March 25, 2019, 12:23 p.m. UTC
This patch provides the advanced drive for I2C used pins on MT8183.
The detail strength specification description of the I2C pin:
When E1=0/E0=0, the strength is 0.125mA.
When E1=0/E0=1, the strength is 0.25mA.
When E1=1/E0=0, the strength is 0.5mA.
When E1=1/E0=1, the strength is 1mA.
For I2C pins, there are existing generic driving setup and the above
specific driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA
driving adjustment in generic driving setup. But in specific driving
setup, they can support 0.125/0.25/0.5/1mA adjustment.
If we enable specific driving setup for I2C pins,
the existing generic driving setup will be disabled.
For some special features, we need the I2C pins specific driving setup.
The specific driving setup is controlled by E1E0EN.
So we need add extra vendor driving preperty instead of the generic
driving property. We can add "mediatek,drive-strength-adv = <XXX>;"
to describe the specific driving setup property.
"XXX" means the value of E1E0EN. So the valid arguments of
"mediatek,drive-strength-adv" are from 0 to 7.

Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
---
 drivers/pinctrl/mediatek/pinctrl-mt8183.c        | 50 ++++++++++++++++++++++++
 drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 47 ++++++++++++++++++++++
 drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 11 ++++++
 drivers/pinctrl/mediatek/pinctrl-paris.c         | 12 ++++++
 4 files changed, 120 insertions(+)

Comments

Nicolas Boichat March 25, 2019, 6:25 p.m. UTC | #1
On Mon, Mar 25, 2019 at 5:23 AM Zhiyong Tao <zhiyong.tao@mediatek.com> wrote:
>
> This patch provides the advanced drive for I2C used pins on MT8183.
> The detail strength specification description of the I2C pin:
> When E1=0/E0=0, the strength is 0.125mA.
> When E1=0/E0=1, the strength is 0.25mA.
> When E1=1/E0=0, the strength is 0.5mA.
> When E1=1/E0=1, the strength is 1mA.
> For I2C pins, there are existing generic driving setup and the above
> specific driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA
> driving adjustment in generic driving setup. But in specific driving
> setup, they can support 0.125/0.25/0.5/1mA adjustment.
> If we enable specific driving setup for I2C pins,
> the existing generic driving setup will be disabled.
> For some special features, we need the I2C pins specific driving setup.
> The specific driving setup is controlled by E1E0EN.
> So we need add extra vendor driving preperty instead of the generic
> driving property. We can add "mediatek,drive-strength-adv = <XXX>;"
> to describe the specific driving setup property.
> "XXX" means the value of E1E0EN. So the valid arguments of
> "mediatek,drive-strength-adv" are from 0 to 7.
>
> Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
> ---
>  drivers/pinctrl/mediatek/pinctrl-mt8183.c        | 50 ++++++++++++++++++++++++
>  drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 47 ++++++++++++++++++++++
>  drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 11 ++++++
>  drivers/pinctrl/mediatek/pinctrl-paris.c         | 12 ++++++
>  4 files changed, 120 insertions(+)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8183.c b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> index 6262fd3678ea..2c7409ed16fa 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> @@ -472,6 +472,51 @@ static const struct mtk_pin_field_calc mt8183_pin_r1_range[] = {
>         PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 13, 1),
>  };
>
> +static const struct mtk_pin_field_calc mt8183_pin_e1e0en_range[] = {
> +       PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 20, 1),
> +       PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 15, 1),
> +       PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 12, 1),
> +       PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 7, 1),
> +       PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 12, 1),
> +       PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 9, 1),
> +       PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 19, 1),
> +       PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 22, 1),
> +       PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 24, 1),
> +       PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 14, 1),
> +       PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 27, 1),
> +       PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 17, 1),
> +};
> +
> +static const struct mtk_pin_field_calc mt8183_pin_e0_range[] = {
> +       PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 21, 1),
> +       PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 16, 1),
> +       PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 13, 1),
> +       PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 8, 1),
> +       PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 13, 1),
> +       PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 10, 1),
> +       PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 20, 1),
> +       PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 23, 1),
> +       PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 25, 1),
> +       PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 15, 1),
> +       PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 28, 1),
> +       PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 18, 1),
> +};
> +
> +static const struct mtk_pin_field_calc mt8183_pin_e1_range[] = {
> +       PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 22, 1),
> +       PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 17, 1),
> +       PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 14, 1),
> +       PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 9, 1),
> +       PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 14, 1),
> +       PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 11, 1),
> +       PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 21, 1),
> +       PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 24, 1),
> +       PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 26, 1),
> +       PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 16, 1),
> +       PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 29, 1),
> +       PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 19, 1),
> +};
> +
>  static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
>         [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8183_pin_mode_range),
>         [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8183_pin_dir_range),
> @@ -485,6 +530,9 @@ static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
>         [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8183_pin_pupd_range),
>         [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8183_pin_r0_range),
>         [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8183_pin_r1_range),
> +       [PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8183_pin_e1e0en_range),
> +       [PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8183_pin_e0_range),
> +       [PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8183_pin_e1_range),
>  };
>
>  static const char * const mt8183_pinctrl_register_base_names[] = {
> @@ -517,6 +565,8 @@ static const struct mtk_pin_soc mt8183_data = {
>         .drive_get = mtk_pinconf_drive_get_rev1,
>         .adv_pull_get = mtk_pinconf_adv_pull_get,
>         .adv_pull_set = mtk_pinconf_adv_pull_set,
> +       .adv_drive_get = mtk_pinconf_adv_drive_get,
> +       .adv_drive_set = mtk_pinconf_adv_drive_set,
>  };
>
>  static const struct of_device_id mt8183_pinctrl_of_match[] = {
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> index b1c368455d30..ef8732e8966b 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> @@ -674,3 +674,50 @@ int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
>
>         return 0;
>  }
> +
> +int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
> +                             const struct mtk_pin_desc *desc, u32 arg)
> +{
> +       int err;
> +
> +       err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, arg & 1);

Should 1, 2, 4 masks be defined as masks somewhere above in this file?

> +       if (err)
> +               return err;
> +
> +       if (arg & 1) {

It's the second time you use arg & 1.

Maybe define:
int en = arg & 1;
int e0 = !!(arg & 2);
int e1 = !!(arg & 4);

Also, I feel that the code looks a little cleaner if you just return early here:
if (!(arg & 1))
   return err;

> +               err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0,
> +                                      !!(arg & 2));
> +               if (err)
> +                       return err;
> +
> +               err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1,
> +                                      !!(arg & 4));
> +               if (err)
> +                       return err;
> +       }
> +
> +       return err;
> +}
> +
> +int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
> +                             const struct mtk_pin_desc *desc, u32 *val)

Is there any user for this function? If not, why do we even define it?

> +{
> +       u32 en, e0, e1;
> +       int err;
> +
> +       err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, &en);
> +       if (err)
> +               return err;
> +
> +       err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0);
> +       if (err)
> +               return err;
> +
> +       err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1);
> +       if (err)
> +               return err;
> +
> +       *val = (e0 | e1 << 1 | en << 2) & 0x7;

I'm confused. Here, e0 is bit 0, e1 is bit 1, end is bit 2. But above
in mtk_pinconf_adv_drive_set, it seems to be in this order: en, e0,
e1?

> +
> +       return 0;
> +}
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> index 6d24522739d9..1b7da42aa1d5 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> @@ -63,6 +63,9 @@ enum {
>         PINCTRL_PIN_REG_IES,
>         PINCTRL_PIN_REG_PULLEN,
>         PINCTRL_PIN_REG_PULLSEL,
> +       PINCTRL_PIN_REG_DRV_EN,
> +       PINCTRL_PIN_REG_DRV_E0,
> +       PINCTRL_PIN_REG_DRV_E1,
>         PINCTRL_PIN_REG_MAX,
>  };
>
> @@ -224,6 +227,10 @@ struct mtk_pin_soc {
>         int (*adv_pull_get)(struct mtk_pinctrl *hw,
>                             const struct mtk_pin_desc *desc, bool pullup,
>                             u32 *val);
> +       int (*adv_drive_set)(struct mtk_pinctrl *hw,
> +                            const struct mtk_pin_desc *desc, u32 arg);
> +       int (*adv_drive_get)(struct mtk_pinctrl *hw,
> +                            const struct mtk_pin_desc *desc, u32 *val);
>
>         /* Specific driver data */
>         void                            *driver_data;
> @@ -287,5 +294,9 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
>  int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
>                              const struct mtk_pin_desc *desc, bool pullup,
>                              u32 *val);
> +int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
> +                             const struct mtk_pin_desc *desc, u32 arg);
> +int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
> +                             const struct mtk_pin_desc *desc, u32 *val);
>
>  #endif /* __PINCTRL_MTK_COMMON_V2_H */
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index b59e10852bfb..dcd295f0eb4b 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -20,12 +20,14 @@
>  #define MTK_PIN_CONFIG_RDSEL   (PIN_CONFIG_END + 2)
>  #define MTK_PIN_CONFIG_PU_ADV  (PIN_CONFIG_END + 3)
>  #define MTK_PIN_CONFIG_PD_ADV  (PIN_CONFIG_END + 4)
> +#define MTK_PIN_CONFIG_DRV_ADV (PIN_CONFIG_END + 5)
>
>  static const struct pinconf_generic_params mtk_custom_bindings[] = {
>         {"mediatek,tdsel",      MTK_PIN_CONFIG_TDSEL,           0},
>         {"mediatek,rdsel",      MTK_PIN_CONFIG_RDSEL,           0},
>         {"mediatek,pull-up-adv", MTK_PIN_CONFIG_PU_ADV,         1},
>         {"mediatek,pull-down-adv", MTK_PIN_CONFIG_PD_ADV,       1},
> +       {"mediatek,drive-strength-adv", MTK_PIN_CONFIG_DRV_ADV, 2},
>  };
>
>  #ifdef CONFIG_DEBUG_FS
> @@ -34,6 +36,7 @@ static const struct pin_config_item mtk_conf_items[] = {
>         PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
>         PCONFDUMP(MTK_PIN_CONFIG_PU_ADV, "pu-adv", NULL, true),
>         PCONFDUMP(MTK_PIN_CONFIG_PD_ADV, "pd-adv", NULL, true),
> +       PCONFDUMP(MTK_PIN_CONFIG_DRV_ADV, "drive-strengt-adv", NULL, true),

drive-strength-adv

>  };
>  #endif
>
> @@ -311,6 +314,15 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
>                         return -ENOTSUPP;
>                 }
>                 break;
> +       case MTK_PIN_CONFIG_DRV_ADV:
> +               if (hw->soc->adv_drive_set) {
> +                       err = hw->soc->adv_drive_set(hw, desc, arg);
> +                       if (err)
> +                               return err;
> +               } else {
> +                       return -ENOTSUPP;
> +               }
> +               break;
>         default:
>                 err = -ENOTSUPP;
>         }
> --
> 2.12.5
>
Zhiyong Tao March 26, 2019, 3:10 a.m. UTC | #2
On Mon, 2019-03-25 at 11:25 -0700, Nicolas Boichat wrote:
> On Mon, Mar 25, 2019 at 5:23 AM Zhiyong Tao <zhiyong.tao@mediatek.com> wrote:
> >
> > This patch provides the advanced drive for I2C used pins on MT8183.
> > The detail strength specification description of the I2C pin:
> > When E1=0/E0=0, the strength is 0.125mA.
> > When E1=0/E0=1, the strength is 0.25mA.
> > When E1=1/E0=0, the strength is 0.5mA.
> > When E1=1/E0=1, the strength is 1mA.
> > For I2C pins, there are existing generic driving setup and the above
> > specific driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA
> > driving adjustment in generic driving setup. But in specific driving
> > setup, they can support 0.125/0.25/0.5/1mA adjustment.
> > If we enable specific driving setup for I2C pins,
> > the existing generic driving setup will be disabled.
> > For some special features, we need the I2C pins specific driving setup.
> > The specific driving setup is controlled by E1E0EN.
> > So we need add extra vendor driving preperty instead of the generic
> > driving property. We can add "mediatek,drive-strength-adv = <XXX>;"
> > to describe the specific driving setup property.
> > "XXX" means the value of E1E0EN. So the valid arguments of
> > "mediatek,drive-strength-adv" are from 0 to 7.
> >
> > Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
> > ---
> >  drivers/pinctrl/mediatek/pinctrl-mt8183.c        | 50 ++++++++++++++++++++++++
> >  drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 47 ++++++++++++++++++++++
> >  drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 11 ++++++
> >  drivers/pinctrl/mediatek/pinctrl-paris.c         | 12 ++++++
> >  4 files changed, 120 insertions(+)
> >
> > diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8183.c b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> > index 6262fd3678ea..2c7409ed16fa 100644
> > --- a/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> > +++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> > @@ -472,6 +472,51 @@ static const struct mtk_pin_field_calc mt8183_pin_r1_range[] = {
> >         PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 13, 1),
> >  };
> >
> > +static const struct mtk_pin_field_calc mt8183_pin_e1e0en_range[] = {
> > +       PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 20, 1),
> > +       PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 15, 1),
> > +       PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 12, 1),
> > +       PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 7, 1),
> > +       PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 12, 1),
> > +       PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 9, 1),
> > +       PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 19, 1),
> > +       PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 22, 1),
> > +       PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 24, 1),
> > +       PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 14, 1),
> > +       PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 27, 1),
> > +       PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 17, 1),
> > +};
> > +
> > +static const struct mtk_pin_field_calc mt8183_pin_e0_range[] = {
> > +       PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 21, 1),
> > +       PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 16, 1),
> > +       PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 13, 1),
> > +       PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 8, 1),
> > +       PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 13, 1),
> > +       PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 10, 1),
> > +       PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 20, 1),
> > +       PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 23, 1),
> > +       PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 25, 1),
> > +       PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 15, 1),
> > +       PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 28, 1),
> > +       PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 18, 1),
> > +};
> > +
> > +static const struct mtk_pin_field_calc mt8183_pin_e1_range[] = {
> > +       PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 22, 1),
> > +       PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 17, 1),
> > +       PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 14, 1),
> > +       PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 9, 1),
> > +       PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 14, 1),
> > +       PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 11, 1),
> > +       PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 21, 1),
> > +       PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 24, 1),
> > +       PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 26, 1),
> > +       PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 16, 1),
> > +       PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 29, 1),
> > +       PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 19, 1),
> > +};
> > +
> >  static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
> >         [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8183_pin_mode_range),
> >         [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8183_pin_dir_range),
> > @@ -485,6 +530,9 @@ static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
> >         [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8183_pin_pupd_range),
> >         [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8183_pin_r0_range),
> >         [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8183_pin_r1_range),
> > +       [PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8183_pin_e1e0en_range),
> > +       [PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8183_pin_e0_range),
> > +       [PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8183_pin_e1_range),
> >  };
> >
> >  static const char * const mt8183_pinctrl_register_base_names[] = {
> > @@ -517,6 +565,8 @@ static const struct mtk_pin_soc mt8183_data = {
> >         .drive_get = mtk_pinconf_drive_get_rev1,
> >         .adv_pull_get = mtk_pinconf_adv_pull_get,
> >         .adv_pull_set = mtk_pinconf_adv_pull_set,
> > +       .adv_drive_get = mtk_pinconf_adv_drive_get,
> > +       .adv_drive_set = mtk_pinconf_adv_drive_set,
> >  };
> >
> >  static const struct of_device_id mt8183_pinctrl_of_match[] = {
> > diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> > index b1c368455d30..ef8732e8966b 100644
> > --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> > +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> > @@ -674,3 +674,50 @@ int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
> >
> >         return 0;
> >  }
> > +
> > +int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
> > +                             const struct mtk_pin_desc *desc, u32 arg)
> > +{
> > +       int err;
> > +
> > +       err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, arg & 1);
> 
> Should 1, 2, 4 masks be defined as masks somewhere above in this file?
> 
> > +       if (err)
> > +               return err;
> > +
> > +       if (arg & 1) {
> 
> It's the second time you use arg & 1.
> 
> Maybe define:
> int en = arg & 1;
> int e0 = !!(arg & 2);
> int e1 = !!(arg & 4);
> 
> Also, I feel that the code looks a little cleaner if you just return early here:
> if (!(arg & 1))
>    return err;

Thanks for your suggestion, we will change it in v4.
> 
> > +               err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0,
> > +                                      !!(arg & 2));
> > +               if (err)
> > +                       return err;
> > +
> > +               err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1,
> > +                                      !!(arg & 4));
> > +               if (err)
> > +                       return err;
> > +       }
> > +
> > +       return err;
> > +}
> > +
> > +int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
> > +                             const struct mtk_pin_desc *desc, u32 *val)
> 
> Is there any user for this function? If not, why do we even define it?
I should add it in the function "mtk_pinconf_get". It will use it.
We will add it in v4. Thanks for your suggestion.
> 
> > +{
> > +       u32 en, e0, e1;
> > +       int err;
> > +
> > +       err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, &en);
> > +       if (err)
> > +               return err;
> > +
> > +       err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0);
> > +       if (err)
> > +               return err;
> > +
> > +       err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1);
> > +       if (err)
> > +               return err;
> > +
> > +       *val = (e0 | e1 << 1 | en << 2) & 0x7;
> 
> I'm confused. Here, e0 is bit 0, e1 is bit 1, end is bit 2. But above
> in mtk_pinconf_adv_drive_set, it seems to be in this order: en, e0,
> e1?

==>the correct order is e1e0en, e1 is bit 2, e0 is bit 1, en is bit 0.
we will change it as "*val = (en | e0 << 1 | e1 << 2) & 0x7;" in v4.
> 
> > +
> > +       return 0;
> > +}
> > diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> > index 6d24522739d9..1b7da42aa1d5 100644
> > --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> > +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> > @@ -63,6 +63,9 @@ enum {
> >         PINCTRL_PIN_REG_IES,
> >         PINCTRL_PIN_REG_PULLEN,
> >         PINCTRL_PIN_REG_PULLSEL,
> > +       PINCTRL_PIN_REG_DRV_EN,
> > +       PINCTRL_PIN_REG_DRV_E0,
> > +       PINCTRL_PIN_REG_DRV_E1,
> >         PINCTRL_PIN_REG_MAX,
> >  };
> >
> > @@ -224,6 +227,10 @@ struct mtk_pin_soc {
> >         int (*adv_pull_get)(struct mtk_pinctrl *hw,
> >                             const struct mtk_pin_desc *desc, bool pullup,
> >                             u32 *val);
> > +       int (*adv_drive_set)(struct mtk_pinctrl *hw,
> > +                            const struct mtk_pin_desc *desc, u32 arg);
> > +       int (*adv_drive_get)(struct mtk_pinctrl *hw,
> > +                            const struct mtk_pin_desc *desc, u32 *val);
> >
> >         /* Specific driver data */
> >         void                            *driver_data;
> > @@ -287,5 +294,9 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
> >  int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
> >                              const struct mtk_pin_desc *desc, bool pullup,
> >                              u32 *val);
> > +int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
> > +                             const struct mtk_pin_desc *desc, u32 arg);
> > +int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
> > +                             const struct mtk_pin_desc *desc, u32 *val);
> >
> >  #endif /* __PINCTRL_MTK_COMMON_V2_H */
> > diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> > index b59e10852bfb..dcd295f0eb4b 100644
> > --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> > +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> > @@ -20,12 +20,14 @@
> >  #define MTK_PIN_CONFIG_RDSEL   (PIN_CONFIG_END + 2)
> >  #define MTK_PIN_CONFIG_PU_ADV  (PIN_CONFIG_END + 3)
> >  #define MTK_PIN_CONFIG_PD_ADV  (PIN_CONFIG_END + 4)
> > +#define MTK_PIN_CONFIG_DRV_ADV (PIN_CONFIG_END + 5)
> >
> >  static const struct pinconf_generic_params mtk_custom_bindings[] = {
> >         {"mediatek,tdsel",      MTK_PIN_CONFIG_TDSEL,           0},
> >         {"mediatek,rdsel",      MTK_PIN_CONFIG_RDSEL,           0},
> >         {"mediatek,pull-up-adv", MTK_PIN_CONFIG_PU_ADV,         1},
> >         {"mediatek,pull-down-adv", MTK_PIN_CONFIG_PD_ADV,       1},
> > +       {"mediatek,drive-strength-adv", MTK_PIN_CONFIG_DRV_ADV, 2},
> >  };
> >
> >  #ifdef CONFIG_DEBUG_FS
> > @@ -34,6 +36,7 @@ static const struct pin_config_item mtk_conf_items[] = {
> >         PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
> >         PCONFDUMP(MTK_PIN_CONFIG_PU_ADV, "pu-adv", NULL, true),
> >         PCONFDUMP(MTK_PIN_CONFIG_PD_ADV, "pd-adv", NULL, true),
> > +       PCONFDUMP(MTK_PIN_CONFIG_DRV_ADV, "drive-strengt-adv", NULL, true),
> 
> drive-strength-adv
> 
> >  };
> >  #endif
> >
> > @@ -311,6 +314,15 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
> >                         return -ENOTSUPP;
> >                 }
> >                 break;
> > +       case MTK_PIN_CONFIG_DRV_ADV:
> > +               if (hw->soc->adv_drive_set) {
> > +                       err = hw->soc->adv_drive_set(hw, desc, arg);
> > +                       if (err)
> > +                               return err;
> > +               } else {
> > +                       return -ENOTSUPP;
> > +               }
> > +               break;
> >         default:
> >                 err = -ENOTSUPP;
> >         }
> > --
> > 2.12.5
> >

Patch
diff mbox series

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8183.c b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
index 6262fd3678ea..2c7409ed16fa 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8183.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
@@ -472,6 +472,51 @@  static const struct mtk_pin_field_calc mt8183_pin_r1_range[] = {
 	PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 13, 1),
 };
 
+static const struct mtk_pin_field_calc mt8183_pin_e1e0en_range[] = {
+	PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 20, 1),
+	PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 15, 1),
+	PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 12, 1),
+	PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 7, 1),
+	PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 12, 1),
+	PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 9, 1),
+	PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 19, 1),
+	PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 22, 1),
+	PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 24, 1),
+	PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 14, 1),
+	PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 27, 1),
+	PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 17, 1),
+};
+
+static const struct mtk_pin_field_calc mt8183_pin_e0_range[] = {
+	PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 21, 1),
+	PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 16, 1),
+	PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 13, 1),
+	PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 8, 1),
+	PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 13, 1),
+	PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 10, 1),
+	PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 20, 1),
+	PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 23, 1),
+	PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 25, 1),
+	PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 15, 1),
+	PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 28, 1),
+	PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 18, 1),
+};
+
+static const struct mtk_pin_field_calc mt8183_pin_e1_range[] = {
+	PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 22, 1),
+	PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 17, 1),
+	PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 14, 1),
+	PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 9, 1),
+	PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 14, 1),
+	PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 11, 1),
+	PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 21, 1),
+	PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 24, 1),
+	PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 26, 1),
+	PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 16, 1),
+	PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 29, 1),
+	PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 19, 1),
+};
+
 static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
 	[PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8183_pin_mode_range),
 	[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8183_pin_dir_range),
@@ -485,6 +530,9 @@  static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
 	[PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8183_pin_pupd_range),
 	[PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8183_pin_r0_range),
 	[PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8183_pin_r1_range),
+	[PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8183_pin_e1e0en_range),
+	[PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8183_pin_e0_range),
+	[PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8183_pin_e1_range),
 };
 
 static const char * const mt8183_pinctrl_register_base_names[] = {
@@ -517,6 +565,8 @@  static const struct mtk_pin_soc mt8183_data = {
 	.drive_get = mtk_pinconf_drive_get_rev1,
 	.adv_pull_get = mtk_pinconf_adv_pull_get,
 	.adv_pull_set = mtk_pinconf_adv_pull_set,
+	.adv_drive_get = mtk_pinconf_adv_drive_get,
+	.adv_drive_set = mtk_pinconf_adv_drive_set,
 };
 
 static const struct of_device_id mt8183_pinctrl_of_match[] = {
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index b1c368455d30..ef8732e8966b 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -674,3 +674,50 @@  int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+
+int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
+			      const struct mtk_pin_desc *desc, u32 arg)
+{
+	int err;
+
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, arg & 1);
+	if (err)
+		return err;
+
+	if (arg & 1) {
+		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0,
+				       !!(arg & 2));
+		if (err)
+			return err;
+
+		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1,
+				       !!(arg & 4));
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
+			      const struct mtk_pin_desc *desc, u32 *val)
+{
+	u32 en, e0, e1;
+	int err;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, &en);
+	if (err)
+		return err;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0);
+	if (err)
+		return err;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1);
+	if (err)
+		return err;
+
+	*val = (e0 | e1 << 1 | en << 2) & 0x7;
+
+	return 0;
+}
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
index 6d24522739d9..1b7da42aa1d5 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
@@ -63,6 +63,9 @@  enum {
 	PINCTRL_PIN_REG_IES,
 	PINCTRL_PIN_REG_PULLEN,
 	PINCTRL_PIN_REG_PULLSEL,
+	PINCTRL_PIN_REG_DRV_EN,
+	PINCTRL_PIN_REG_DRV_E0,
+	PINCTRL_PIN_REG_DRV_E1,
 	PINCTRL_PIN_REG_MAX,
 };
 
@@ -224,6 +227,10 @@  struct mtk_pin_soc {
 	int (*adv_pull_get)(struct mtk_pinctrl *hw,
 			    const struct mtk_pin_desc *desc, bool pullup,
 			    u32 *val);
+	int (*adv_drive_set)(struct mtk_pinctrl *hw,
+			     const struct mtk_pin_desc *desc, u32 arg);
+	int (*adv_drive_get)(struct mtk_pinctrl *hw,
+			     const struct mtk_pin_desc *desc, u32 *val);
 
 	/* Specific driver data */
 	void				*driver_data;
@@ -287,5 +294,9 @@  int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
 int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
 			     const struct mtk_pin_desc *desc, bool pullup,
 			     u32 *val);
+int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
+			      const struct mtk_pin_desc *desc, u32 arg);
+int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
+			      const struct mtk_pin_desc *desc, u32 *val);
 
 #endif /* __PINCTRL_MTK_COMMON_V2_H */
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index b59e10852bfb..dcd295f0eb4b 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -20,12 +20,14 @@ 
 #define MTK_PIN_CONFIG_RDSEL	(PIN_CONFIG_END + 2)
 #define MTK_PIN_CONFIG_PU_ADV	(PIN_CONFIG_END + 3)
 #define MTK_PIN_CONFIG_PD_ADV	(PIN_CONFIG_END + 4)
+#define MTK_PIN_CONFIG_DRV_ADV	(PIN_CONFIG_END + 5)
 
 static const struct pinconf_generic_params mtk_custom_bindings[] = {
 	{"mediatek,tdsel",	MTK_PIN_CONFIG_TDSEL,		0},
 	{"mediatek,rdsel",	MTK_PIN_CONFIG_RDSEL,		0},
 	{"mediatek,pull-up-adv", MTK_PIN_CONFIG_PU_ADV,		1},
 	{"mediatek,pull-down-adv", MTK_PIN_CONFIG_PD_ADV,	1},
+	{"mediatek,drive-strength-adv", MTK_PIN_CONFIG_DRV_ADV,	2},
 };
 
 #ifdef CONFIG_DEBUG_FS
@@ -34,6 +36,7 @@  static const struct pin_config_item mtk_conf_items[] = {
 	PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
 	PCONFDUMP(MTK_PIN_CONFIG_PU_ADV, "pu-adv", NULL, true),
 	PCONFDUMP(MTK_PIN_CONFIG_PD_ADV, "pd-adv", NULL, true),
+	PCONFDUMP(MTK_PIN_CONFIG_DRV_ADV, "drive-strengt-adv", NULL, true),
 };
 #endif
 
@@ -311,6 +314,15 @@  static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 			return -ENOTSUPP;
 		}
 		break;
+	case MTK_PIN_CONFIG_DRV_ADV:
+		if (hw->soc->adv_drive_set) {
+			err = hw->soc->adv_drive_set(hw, desc, arg);
+			if (err)
+				return err;
+		} else {
+			return -ENOTSUPP;
+		}
+		break;
 	default:
 		err = -ENOTSUPP;
 	}