[kvm-unit-tests,v2] Add a .gitlab-ci.yml file for automatic CI testing on GitLab instances
diff mbox series

Message ID 1553680549-25775-1-git-send-email-thuth@redhat.com
State New
Headers show
Series
  • [kvm-unit-tests,v2] Add a .gitlab-ci.yml file for automatic CI testing on GitLab instances
Related show

Commit Message

Thomas Huth March 27, 2019, 9:55 a.m. UTC
When changing common code of the kvm-unit-tests, one should make sure that
the tests still compile fine for all target architectures afterwards. But
compiling kvm-unit-tests for all target architectures manually is cumbersome.
For people like me who store their git trees on GitLab, this can be done
automatically via a CI system instead. Using the .gitlab-ci.yml file, auto-
matic builds are now triggered on each push to a kvm-unit-test repository on
gitlab.com. Additionally, the script also runs the tests that can be executed
with QEMU TCG (except for s390x, since the QEMU package of the CI container
currently does not provide the required s390-ccw bios here).

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 v2:
 - Don't use the "--processor" option for configure (they are not required)
 - Add pmu and psci tests to the arm and aarch64 builds
 - Example can be seen here:
   https://gitlab.com/huth/kvm-unit-tests/pipelines/53825156

 .gitlab-ci.yml | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 .gitlab-ci.yml

Comments

Andrew Jones March 27, 2019, 12:45 p.m. UTC | #1
On Wed, Mar 27, 2019 at 10:55:49AM +0100, Thomas Huth wrote:
> When changing common code of the kvm-unit-tests, one should make sure that
> the tests still compile fine for all target architectures afterwards. But
> compiling kvm-unit-tests for all target architectures manually is cumbersome.
> For people like me who store their git trees on GitLab, this can be done
> automatically via a CI system instead. Using the .gitlab-ci.yml file, auto-
> matic builds are now triggered on each push to a kvm-unit-test repository on
> gitlab.com. Additionally, the script also runs the tests that can be executed
> with QEMU TCG (except for s390x, since the QEMU package of the CI container
> currently does not provide the required s390-ccw bios here).
> 
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
>  v2:
>  - Don't use the "--processor" option for configure (they are not required)
>  - Add pmu and psci tests to the arm and aarch64 builds
>  - Example can be seen here:
>    https://gitlab.com/huth/kvm-unit-tests/pipelines/53825156
> 
>  .gitlab-ci.yml | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 75 insertions(+)
>  create mode 100644 .gitlab-ci.yml
> 
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> new file mode 100644
> index 0000000..50a1e39
> --- /dev/null
> +++ b/.gitlab-ci.yml
> @@ -0,0 +1,75 @@
> +before_script:
> + - apt-get update -qq
> + - apt-get install -y -qq qemu-system
> +
> +build-aarch64:
> + script:
> + - apt-get install -y -qq gcc-aarch64-linux-gnu
> + - ./configure --arch=aarch64 --cross-prefix=aarch64-linux-gnu-
> + - make -j2
> + - ACCEL=tcg ./run_tests.sh
> +     selftest-setup selftest-vectors-kernel selftest-vectors-user selftest-smp
> +     pci-test pmu gicv2-active gicv3-active psci timer
> +     | tee results.txt
> + - if grep -q FAIL results.txt ; then exit 1 ; fi
> +
> +build-arm:
> + script:
> + - apt-get install -y -qq gcc-arm-linux-gnueabi
> + - ./configure --arch=arm --cross-prefix=arm-linux-gnueabi-
> + - make -j2
> + - ACCEL=tcg ./run_tests.sh
> +     selftest-setup selftest-vectors-kernel selftest-vectors-user selftest-smp
> +     pci-test pmu gicv2-active gicv3-active psci
> +     | tee results.txt
> + - if grep -q FAIL results.txt ; then exit 1 ; fi
> +
> +build-ppc64be:
> + script:
> + - apt-get install -y -qq gcc-powerpc64-linux-gnu
> + - ./configure --arch=ppc64 --endian=big --cross-prefix=powerpc64-linux-gnu-
> + - make -j2
> + - ACCEL=tcg ./run_tests.sh
> +     selftest-setup spapr_hcall rtas-get-time-of-day rtas-get-time-of-day-base
> +     rtas-set-time-of-day emulator
> +     | tee results.txt
> + - if grep -q FAIL results.txt ; then exit 1 ; fi
> +
> +build-ppc64le:
> + script:
> + - apt-get install -y -qq gcc-powerpc64-linux-gnu
> + - ./configure --arch=ppc64 --endian=little --cross-prefix=powerpc64-linux-gnu-
> + - make -j2
> + - ACCEL=tcg ./run_tests.sh
> +     selftest-setup spapr_hcall rtas-get-time-of-day rtas-get-time-of-day-base
> +     rtas-set-time-of-day emulator
> +     | tee results.txt
> + - if grep -q FAIL results.txt ; then exit 1 ; fi
> +
> +build-s390x:
> + script:
> + - apt-get install -y -qq gcc-s390x-linux-gnu
> + - ./configure --arch=s390x --cross-prefix=s390x-linux-gnu-
> + - make -j2
> +
> +build-x86_64:
> + script:
> + - ./configure --arch=x86_64
> + - make -j2
> + - ACCEL=tcg ./run_tests.sh
> +     ioapic-split ioapic smptest smptest3 vmexit_cpuid vmexit_mov_from_cr8
> +     vmexit_mov_to_cr8 vmexit_inl_pmtimer  vmexit_ipi vmexit_ipi_halt
> +     vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed
> +     eventinj msr port80 sieve tsc rmap_chain umip hyperv_stimer intel_iommu
> +     | tee results.txt
> + - if grep -q FAIL results.txt ; then exit 1 ; fi
> +
> +build-i386:
> + script:
> + - apt-get install -y -qq gcc-multilib
> + - ./configure --arch=i386
> + - make -j2
> + - ACCEL=tcg ./run_tests.sh
> +     eventinj port80 sieve tsc taskswitch umip hyperv_stimer
> +     | tee results.txt
> + - if grep -q FAIL results.txt ; then exit 1 ; fi
> -- 
> 1.8.3.1
>

Acked-by: Andrew Jones <drjones@redhat.com>

Patch
diff mbox series

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
new file mode 100644
index 0000000..50a1e39
--- /dev/null
+++ b/.gitlab-ci.yml
@@ -0,0 +1,75 @@ 
+before_script:
+ - apt-get update -qq
+ - apt-get install -y -qq qemu-system
+
+build-aarch64:
+ script:
+ - apt-get install -y -qq gcc-aarch64-linux-gnu
+ - ./configure --arch=aarch64 --cross-prefix=aarch64-linux-gnu-
+ - make -j2
+ - ACCEL=tcg ./run_tests.sh
+     selftest-setup selftest-vectors-kernel selftest-vectors-user selftest-smp
+     pci-test pmu gicv2-active gicv3-active psci timer
+     | tee results.txt
+ - if grep -q FAIL results.txt ; then exit 1 ; fi
+
+build-arm:
+ script:
+ - apt-get install -y -qq gcc-arm-linux-gnueabi
+ - ./configure --arch=arm --cross-prefix=arm-linux-gnueabi-
+ - make -j2
+ - ACCEL=tcg ./run_tests.sh
+     selftest-setup selftest-vectors-kernel selftest-vectors-user selftest-smp
+     pci-test pmu gicv2-active gicv3-active psci
+     | tee results.txt
+ - if grep -q FAIL results.txt ; then exit 1 ; fi
+
+build-ppc64be:
+ script:
+ - apt-get install -y -qq gcc-powerpc64-linux-gnu
+ - ./configure --arch=ppc64 --endian=big --cross-prefix=powerpc64-linux-gnu-
+ - make -j2
+ - ACCEL=tcg ./run_tests.sh
+     selftest-setup spapr_hcall rtas-get-time-of-day rtas-get-time-of-day-base
+     rtas-set-time-of-day emulator
+     | tee results.txt
+ - if grep -q FAIL results.txt ; then exit 1 ; fi
+
+build-ppc64le:
+ script:
+ - apt-get install -y -qq gcc-powerpc64-linux-gnu
+ - ./configure --arch=ppc64 --endian=little --cross-prefix=powerpc64-linux-gnu-
+ - make -j2
+ - ACCEL=tcg ./run_tests.sh
+     selftest-setup spapr_hcall rtas-get-time-of-day rtas-get-time-of-day-base
+     rtas-set-time-of-day emulator
+     | tee results.txt
+ - if grep -q FAIL results.txt ; then exit 1 ; fi
+
+build-s390x:
+ script:
+ - apt-get install -y -qq gcc-s390x-linux-gnu
+ - ./configure --arch=s390x --cross-prefix=s390x-linux-gnu-
+ - make -j2
+
+build-x86_64:
+ script:
+ - ./configure --arch=x86_64
+ - make -j2
+ - ACCEL=tcg ./run_tests.sh
+     ioapic-split ioapic smptest smptest3 vmexit_cpuid vmexit_mov_from_cr8
+     vmexit_mov_to_cr8 vmexit_inl_pmtimer  vmexit_ipi vmexit_ipi_halt
+     vmexit_ple_round_robin vmexit_tscdeadline vmexit_tscdeadline_immed
+     eventinj msr port80 sieve tsc rmap_chain umip hyperv_stimer intel_iommu
+     | tee results.txt
+ - if grep -q FAIL results.txt ; then exit 1 ; fi
+
+build-i386:
+ script:
+ - apt-get install -y -qq gcc-multilib
+ - ./configure --arch=i386
+ - make -j2
+ - ACCEL=tcg ./run_tests.sh
+     eventinj port80 sieve tsc taskswitch umip hyperv_stimer
+     | tee results.txt
+ - if grep -q FAIL results.txt ; then exit 1 ; fi