diff mbox series

[v9,2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

Message ID 1553847606-18122-3-git-send-email-masonccyang@mxic.com.tw (mailing list archive)
State New, archived
Headers show
Series mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver | expand

Commit Message

Mason Yang March 29, 2019, 8:20 a.m. UTC
Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
 drivers/spi/Kconfig           |   6 +
 drivers/spi/Makefile          |   1 +
 drivers/spi/spi-renesas-rpc.c | 640 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 647 insertions(+)
 create mode 100644 drivers/spi/spi-renesas-rpc.c

Comments

Marek Vasut March 29, 2019, 10:44 a.m. UTC | #1
On 3/29/19 9:20 AM, Mason Yang wrote:

[...]

> +struct rpc_spi {
> +	struct clk *clk_rpc;
> +	void __iomem *base;
> +	void __iomem *dirmap;
> +	void __iomem *wbuf;

Shouldn't all this stuff somehow come from the MFD driver ?

> +	struct regmap *regmap;
> +	u32 cur_speed_hz;
> +	u32 cmd;
> +	u32 addr;
> +	u32 dummy;
> +	u32 smcr;
> +	u32 smenr;
> +	u32 xferlen;
> +	u32 totalxferlen;
> +	enum spi_mem_data_dir xfer_dir;
> +	struct reset_control *rstc;
> +};
> +
[...]
Sergei Shtylyov March 29, 2019, 3:52 p.m. UTC | #2
On 03/29/2019 11:20 AM, Mason Yang wrote:

> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
> 
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[...]
> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
> new file mode 100644
> index 0000000..037f273
> --- /dev/null
> +++ b/drivers/spi/spi-renesas-rpc.c
> @@ -0,0 +1,640 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp.
> +// Copyright (C) 2019 Macronix International Co., Ltd.
> +//
> +// R-Car Gen3 RPC-IF SPI/QSPI/Octa driver
> +//
> +// Author:
> +//	Mason Yang <masonccyang@mxic.com.tw>
> +//
> +
> +#include <linux/mfd/renesas-rpc.h>
> +#include <linux/spi/spi.h>
> +#include <linux/spi/spi-mem.h>
> +
> +#include <asm/unaligned.h>
> +
> +struct rpc_spi {
> +	struct clk *clk_rpc;
> +	void __iomem *base;
> +	void __iomem *dirmap;
> +	void __iomem *wbuf;
> +	struct regmap *regmap;

   Why copy struct rpc_mfd's fields?

> +	u32 cur_speed_hz;
> +	u32 cmd;
> +	u32 addr;
> +	u32 dummy;
> +	u32 smcr;
> +	u32 smenr;

   I suggest renaming this field to 'enable'.

> +	u32 xferlen;
> +	u32 totalxferlen;
> +	enum spi_mem_data_dir xfer_dir;
> +	struct reset_control *rstc;
> +};
[...]
> +static void rpc_spi_hw_init(struct rpc_spi *rpc)
> +{
> +	//
> +	// NOTE: The 0x260 are undocumented bits, but they must be set.
> +	//	 RPC_PHYCNT_STRTIM is strobe timing adjustment bit,
> +	//	 0x0 : the delay is biggest,
> +	//	 0x1 : the delay is 2nd biggest,
> +	//	 On H3 ES1.x, the value should be 0, while on others,
> +	//	 the value should be 6.
> +	//
> +	regmap_write(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_CAL |
> +				  RPC_PHYCNT_STRTIM(6) | 0x260);
> +
> +	//
> +	// NOTE: The 0x1511144 are undocumented bits, but they must be set
> +	//       for RPC_PHYOFFSET1.
> +	//	 The 0x31 are undocumented bits, but they must be set
> +	//	 for RPC_PHYOFFSET2.
> +	//
> +	regmap_write(rpc->regmap, RPC_PHYOFFSET1, RPC_PHYOFFSET1_DDRTMG(3) |
> +		     0x1511144);
> +	regmap_write(rpc->regmap, RPC_PHYOFFSET2, 0x31 |
> +		     RPC_PHYOFFSET2_OCTTMG(4));
> +	regmap_write(rpc->regmap, RPC_SSLDR, RPC_SSLDR_SPNDL(7) |
> +		     RPC_SSLDR_SLNDL(7) | RPC_SSLDR_SCKDL(7));
> +	regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD | RPC_CMNCR_SFDE |
> +		     RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ |
> +		     RPC_CMNCR_BSZ(0));
> +}

  This function looks like a candidate to moving to the common (MFD) driver. 

> +
> +static int wait_msg_xfer_end(struct rpc_spi *rpc)
> +{
> +	u32 sts;
> +
> +	return regmap_read_poll_timeout(rpc->regmap, RPC_CMNSR, sts,
> +					sts & RPC_CMNSR_TEND, 0, USEC_PER_SEC);
> +}

   This as well.

> +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
> +					const struct spi_mem_op *op,
> +					u64 *offs, size_t *len)
> +{
> +	struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
> +
> +	rpc->cmd = RPC_SMCMR_CMD(op->cmd.opcode);
> +	rpc->smenr = RPC_SMENR_CDE |
> +		     RPC_SMENR_CDB(ilog2(op->cmd.buswidth));
> +	rpc->totalxferlen = 1;
> +	rpc->xfer_dir = SPI_MEM_NO_DATA;
> +	rpc->xferlen = 0;
> +	rpc->addr = 0;
> +
> +	if (op->addr.nbytes) {
> +		rpc->smenr |= RPC_SMENR_ADB(ilog2(op->addr.buswidth));
> +		if (op->addr.nbytes == 4)
> +			rpc->smenr |= RPC_SMENR_ADE(0xf);
> +		else
> +			rpc->smenr |= RPC_SMENR_ADE(0x7);
> +
> +		if (offs && len)
> +			rpc->addr = *offs;
> +		else
> +			rpc->addr = op->addr.val;
> +		rpc->totalxferlen += op->addr.nbytes;
> +	}
> +
> +	if (op->dummy.nbytes) {
> +		rpc->smenr |= RPC_SMENR_DME;
> +		rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);

   So you haven't fixed this bug? I repeat, the driver doesn't work right
w/o this fixed!

[...]
> +static ssize_t rpc_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
> +				       u64 offs, size_t len, void *buf)
> +{
> +	struct rpc_spi *rpc =
> +			spi_controller_get_devdata(desc->mem->spi->controller);
> +	int ret;
> +
> +	if (offs + desc->info.offset + len > U32_MAX)
> +		return -EINVAL;
> +
> +	if (len > 0x4000000)
> +		len = 0x4000000;

   Ugh...

> +
> +	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
> +	if (ret)
> +		return ret;
> +
> +	rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
> +				    &desc->info.op_tmpl, &offs, &len);
> +
> +	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, 0);
> +	regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RBURST(32) |
> +		     RPC_DRCR_RBE);
> +
> +	regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
> +	regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));

   So you're not even trying to support flashes larger than the read dirmap?
Now I don't think it's acceptable (and I have rewritten this code internally).

[...]
> +static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
> +					u64 offs, size_t len, const void *buf)
> +{
> +	struct rpc_spi *rpc =
> +			spi_controller_get_devdata(desc->mem->spi->controller);
> +	int ret;
> +
> +	if (offs + desc->info.offset + len > U32_MAX)
> +		return -EINVAL;
> +
> +	if (len > RPC_WBUF_SIZE)
> +		len = RPC_WBUF_SIZE;

   Ugh! Again, I no longer think this is acceptable... Maybe we just need
to drop the support of the write buffer...

[...]
> +static void rpc_spi_transfer_setup(struct rpc_spi *rpc,
> +				   struct spi_message *msg)
> +{
[...]
> +	if (xfercnt > 2 && xfer[1].len && xfer[1].tx_buf) {
> +		rpc->smenr |=
> +			RPC_SMENR_ADB(ilog2((unsigned int)xfer[1].tx_nbits));
> +
> +		for (i = 0; i < xfer[1].len; i++)
> +			rpc->addr |= ((u8 *)xfer[1].tx_buf)[i] <<
> +				     (8 * (xfer[1].len - i - 1));
> +
> +		if (xfer[1].len == 4)
> +			rpc->smenr |= RPC_SMENR_ADE(0xf);
> +		else
> +			rpc->smenr |= RPC_SMENR_ADE(0x7);
> +	}
> +
> +	if (xfercnt > 3 && xfer[2].len && xfer[2].tx_buf) {
> +		rpc->smenr |= RPC_SMENR_DME;
> +		rpc->dummy = RPC_SMDMCR_DMCYC(xfer[2].len);

   Needs to be multiplied by 8 (or other value) as well...

[...]
> +static int rpc_spi_probe(struct platform_device *pdev)
> +{
> +	struct spi_controller *ctlr;
> +	struct rpc_mfd *rpc_mfd = dev_get_drvdata(pdev->dev.parent);
> +	struct rpc_spi *rpc;
> +	int ret;
[...]
> +	rpc->clk_rpc = rpc_mfd->clk_rpc;
> +	if (IS_ERR(rpc->clk_rpc))
> +		return PTR_ERR(rpc->clk_rpc);
> +
> +	rpc->base = rpc_mfd->base;
> +	if (IS_ERR(rpc->base))
> +		return PTR_ERR(rpc->base);
> +
> +	rpc->regmap = rpc_mfd->regmap;
> +	if (IS_ERR(rpc->regmap)) {
> +		dev_err(&pdev->dev,
> +			"failed to regmap for rpc-spi, error %ld\n",
> +			PTR_ERR(rpc->regmap));
> +		return PTR_ERR(rpc->regmap);
> +	}
> +
> +	rpc->dirmap = rpc_mfd->dirmap;
> +	if (IS_ERR(rpc->dirmap))
> +		rpc->dirmap = NULL;
> +
> +	rpc->wbuf = rpc_mfd->wbuf;
> +	if (IS_ERR(rpc->wbuf))
> +		rpc->wbuf = NULL;
> +
> +	rpc->rstc = rpc_mfd->rstc;
> +	if (IS_ERR(rpc->rstc))
> +		return PTR_ERR(rpc->rstc);

   Why do we need all this copying?

> +
> +	pm_runtime_enable(&pdev->dev);
> +	ctlr->auto_runtime_pm = true;
> +
> +	ctlr->num_chipselect = 1;
> +	ctlr->mem_ops = &rpc_spi_mem_ops;
> +	ctlr->transfer_one_message = rpc_spi_transfer_one_message;
> +
> +	ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
> +	ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_QUAD | SPI_RX_QUAD;
> +

   We do need pm_runtime_get_sync() here!

> +	rpc_spi_hw_init(rpc);

   And pm_runtime_put() here...

[...]
> +static const struct of_device_id rpc_spi_of_ids[] = {
> +	{ .compatible = "renesas,rcar-rpc-spi", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rpc_spi_of_ids);

   Not needed at all...

[...]

MBR, Sergei
Sergei Shtylyov April 2, 2019, 8:10 p.m. UTC | #3
Hello!

On 04/02/2019 08:48 AM, masonccyang@mxic.com.tw wrote:

>> > +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
>> > +               const struct spi_mem_op *op,
>> > +               u64 *offs, size_t *len)
>> > +{
>> > +   struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
>> > +
>> > +   rpc->cmd = RPC_SMCMR_CMD(op->cmd.opcode);
>> > +   rpc->smenr = RPC_SMENR_CDE |
>> > +           RPC_SMENR_CDB(ilog2(op->cmd.buswidth));
>> > +   rpc->totalxferlen = 1;
>> > +   rpc->xfer_dir = SPI_MEM_NO_DATA;
>> > +   rpc->xferlen = 0;
>> > +   rpc->addr = 0;
>> > +
>> > +   if (op->addr.nbytes) {
>> > +      rpc->smenr |= RPC_SMENR_ADB(ilog2(op->addr.buswidth));
>> > +      if (op->addr.nbytes == 4)
>> > +         rpc->smenr |= RPC_SMENR_ADE(0xf);
>> > +      else
>> > +         rpc->smenr |= RPC_SMENR_ADE(0x7);
>> > +
>> > +      if (offs && len)
>> > +         rpc->addr = *offs;
>> > +      else
>> > +         rpc->addr = op->addr.val;
>> > +      rpc->totalxferlen += op->addr.nbytes;
>> > +   }
>> > +
>> > +   if (op->dummy.nbytes) {
>> > +      rpc->smenr |= RPC_SMENR_DME;
>> > +      rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
>>
>>    So you haven't fixed this bug? I repeat, the driver doesn't work right
>> w/o this fixed!
> 
> Do you mean
> 
> rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes) * 8;   ?

   Yes. Or some other code that amounts to it.

> What is your flash part number?

   Spansion/Cypress S25FS512S. The datasheet says there must be 8 dummy cycles
for the RSFDP command...

> The problem you found is in 1 bit or 4 bits width ?

   1-bit, I think.

>>
>> [...]
>> > +static ssize_t rpc_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
>> > +                   u64 offs, size_t len, void *buf)
>> > +{
>> > +   struct rpc_spi *rpc =
>> > +         spi_controller_get_devdata(desc->mem->spi->controller);
>> > +   int ret;
>> > +
>> > +   if (offs + desc->info.offset + len > U32_MAX)
>> > +      return -EINVAL;
>> > +
>> > +   if (len > 0x4000000)
>> > +      len = 0x4000000;
>>
>>    Ugh...
> 
> by mtd->size ?

  That'd be better, yes.

>> > +
>> > +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
>> > +   if (ret)
>> > +      return ret;
>> > +
>> > +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
>> > +                &desc->info.op_tmpl, &offs, &len);
>> > +
>> > +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, 0);
>> > +   regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RBURST(32) |
>> > +           RPC_DRCR_RBE);
>> > +
>> > +   regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
>> > +   regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
>>
>>    So you're not even trying to support flashes larger than the read dirmap?
>> Now I don't think it's acceptable (and I have rewritten this code internally).
> 
> what about the size comes form mtd->size ?

   I'm not talking about size here; we should use the full address. I'm attaching
my patch...

>> [...]
>> > +static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
>> > +               u64 offs, size_t len, const void *buf)
>> > +{
>> > +   struct rpc_spi *rpc =
>> > +         spi_controller_get_devdata(desc->mem->spi->controller);
>> > +   int ret;
>> > +
>> > +   if (offs + desc->info.offset + len > U32_MAX)
>> > +      return -EINVAL;
>> > +
>> > +   if (len > RPC_WBUF_SIZE)
>> > +      len = RPC_WBUF_SIZE;
>>
>>    Ugh! Again, I no longer think this is acceptable... Maybe we just need
>> to drop the support of the write buffer...
>>
> 
> why ?
> Using write buffer got the much better write performance.

   OK, let's keep it then.

[...]

MBR, Sergei
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Subject: spi: renesas-rpc: allow reading from large flashes

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 drivers/spi/spi-renesas-rpc.c   |   26 ++++++++++++++++++++------
 include/linux/mfd/renesas-rpc.h |    2 ++
 2 files changed, 22 insertions(+), 6 deletions(-)

Index: renesas/drivers/spi/spi-renesas-rpc.c
===================================================================
--- renesas.orig/drivers/spi/spi-renesas-rpc.c
+++ renesas/drivers/spi/spi-renesas-rpc.c
@@ -264,14 +264,12 @@ static ssize_t rpc_spi_mem_dirmap_read(s
 {
 	struct rpc_spi *rpc =
 			spi_controller_get_devdata(desc->mem->spi->controller);
+	size_t _len = len;
 	int ret;
 
 	if (offs + desc->info.offset + len > U32_MAX)
 		return -EINVAL;
 
-	if (len > 0x4000000)
-		len = 0x4000000;
-
 	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
 	if (ret)
 		return ret;
@@ -284,15 +282,31 @@ static ssize_t rpc_spi_mem_dirmap_read(s
 		     RPC_DRCR_RBE);
 
 	regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
-	regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
 	regmap_write(rpc->regmap, RPC_DROPR, 0);
 	regmap_write(rpc->regmap, RPC_DRENR, rpc->smenr);
 	regmap_write(rpc->regmap, RPC_DRDMCR, rpc->dummy);
 	regmap_write(rpc->regmap, RPC_DRDRENR, 0);
 
-	memcpy_fromio(buf, rpc->dirmap + desc->info.offset + offs, len);
+	while (len) {
+		loff_t from = offs & (RPC_DIRMAP_SIZE - 1);
+		size_t size = RPC_DIRMAP_SIZE - from;
+		u32 val = RPC_DREAR_EAC(1);
+
+		if (rpc->smenr & RPC_DRENR_ADE(8))
+			val |= RPC_DREAR_EAV(offs >> 25);
+		regmap_write(rpc->regmap, RPC_DREAR, val);
+
+		if (size > len)
+			size = len;
+
+		memcpy_fromio(buf, rpc->dirmap + desc->info.offset + from,
+			      size);
+		buf  += size;
+		offs += size;
+		len  -= size;
+	}
 
-	return len;
+	return _len;
 }
 
 static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
Index: renesas/include/linux/mfd/renesas-rpc.h
===================================================================
--- renesas.orig/include/linux/mfd/renesas-rpc.h
+++ renesas/include/linux/mfd/renesas-rpc.h
@@ -57,6 +57,7 @@
 #define RPC_DRCMR_OCMD(c)	(((c) & 0xFF) << 0)
 
 #define RPC_DREAR		0x0014	// R/W
+#define RPC_DREAR_EAV(v)	(((v) & 0xff) << 16)
 #define RPC_DREAR_EAC(c)	(((c) & 0x7) << 0)
 
 #define RPC_DROPR		0x0018	// R/W
@@ -140,6 +141,7 @@
 #define RPC_PHYOFFSET2		0x0084	// R/W
 #define RPC_PHYOFFSET2_OCTTMG(v) (((v) & 0x7) << 8)
 
+#define RPC_DIRMAP_SIZE		0x4000000
 #define RPC_WBUF_SIZE		256	// Write Buffer size
 
 struct rpc_mfd {
Sergei Shtylyov April 4, 2019, 6:56 p.m. UTC | #4
Hello!

On 04/03/2019 12:20 PM, masonccyang@mxic.com.tw wrote:

>> >> > +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
>> >> > +               const struct spi_mem_op *op,
>> >> > +               u64 *offs, size_t *len)
>> >> > +{
>> >> > +   struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
>> >> > +
>> >> > +   rpc->cmd = RPC_SMCMR_CMD(op->cmd.opcode);
>> >> > +   rpc->smenr = RPC_SMENR_CDE |
>> >> > +           RPC_SMENR_CDB(ilog2(op->cmd.buswidth));
>> >> > +   rpc->totalxferlen = 1;
>> >> > +   rpc->xfer_dir = SPI_MEM_NO_DATA;
>> >> > +   rpc->xferlen = 0;
>> >> > +   rpc->addr = 0;
>> >> > +
>> >> > +   if (op->addr.nbytes) {
>> >> > +      rpc->smenr |= RPC_SMENR_ADB(ilog2(op->addr.buswidth));
>> >> > +      if (op->addr.nbytes == 4)
>> >> > +         rpc->smenr |= RPC_SMENR_ADE(0xf);
>> >> > +      else
>> >> > +         rpc->smenr |= RPC_SMENR_ADE(0x7);
>> >> > +
>> >> > +      if (offs && len)
>> >> > +         rpc->addr = *offs;
>> >> > +      else
>> >> > +         rpc->addr = op->addr.val;
>> >> > +      rpc->totalxferlen += op->addr.nbytes;
>> >> > +   }
>> >> > +
>> >> > +   if (op->dummy.nbytes) {
>> >> > +      rpc->smenr |= RPC_SMENR_DME;
>> >> > +      rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
>> >>
>> >>    So you haven't fixed this bug? I repeat, the driver doesn't work right
>> >> w/o this fixed!
>> >
>> > Do you mean
>> >
>> > rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes) * 8;   ?
>>
>>    Yes. Or some other code that amounts to it.

   Oops, I wasn't attentive enough, I was proposing:

	rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes * 8);

> why not setting "op->dummy.nbytes = 7" from spi-nor.c protocol layer ?

   We want 8 dummy clocks, not 8 dummy bytes. And if you'd looked into
spi_nor_read_sfdp(), you'd have seen that it requests 8 dummy clocks already.

> driver may check device ID or something else to setup op->dummy.nbytes.

   The RDSFDP command is not chip specific.

> I think it is not a good idea to *8 in spi host driver.

>> > What is your flash part number?
>>
>>    Spansion/Cypress S25FS512S. The datasheet says there must be 8 dummy cycles
>> for the RSFDP command...
>>
>> > The problem you found is in 1 bit or 4 bits width ?
>>
>>    1-bit, I think.
>>
>> >>
>> >> [...]
>> >> > +static ssize_t rpc_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
>> >> > +                   u64 offs, size_t len, void *buf)
>> >> > +{
>> >> > +   struct rpc_spi *rpc =
>> >> > +         spi_controller_get_devdata(desc->mem->spi->controller);
>> >> > +   int ret;
>> >> > +
>> >> > +   if (offs + desc->info.offset + len > U32_MAX)
>> >> > +      return -EINVAL;
>> >> > +
>> >> > +   if (len > 0x4000000)
>> >> > +      len = 0x4000000;
>> >>
>> >>    Ugh...
>> >
>> > by mtd->size ?
>>
>>   That'd be better, yes.
>>
> 
> Oops, it seems hard to get mtd->size info. from spi_mem_dirmap,

   It's in desc->info.length, no?

> I would like to keep 0x4000000.

   I'm seeing Boris in the CC's... Boris, is it legitimate to limit
a single dirmap read by the memory "window" size? Or should we try to 
serve any valid transfer length?

>> >> > +
>> >> > +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
>> >> > +   if (ret)
>> >> > +      return ret;
>> >> > +
>> >> > +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
>> >> > +                &desc->info.op_tmpl, &offs, &len);
>> >> > +
>> >> > +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, 0);
>> >> > +   regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RBURST(32) |
>> >> > +           RPC_DRCR_RBE);
>> >> > +
>> >> > +   regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
>> >> > +   regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
>> >>
>> >>    So you're not even trying to support flashes larger than the
>> read dirmap?
>> >> Now I don't think it's acceptable (and I have rewritten this code
>> internally).
>> >
>> > what about the size comes form mtd->size ?
>>
>>    I'm not talking about size here; we should use the full address.
>> I'm attaching
>> my patch...
> 
> okay,got it!
> what about just
> -      regmap_write(rpc->mfd->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
> +      regmap_write(rpc->mfd->regmap, RPC_DREAR,
> +                   RPC_DREAR_EAV(offs >> 25) | RPC_DREAR_EAC(1));
> 
> because only > 64MByte size make RPC_DREAR_EAV() work.

   Boris, what's your opinion on this?
   Note that for the write dirmap we have just 256-byte buffer (reusing
the read cache). Is it legitimate to limit the served length to 256 bytes?

> thanks & best regards,
> Mason

MBR, Sergei
Boris Brezillon April 4, 2019, 7:12 p.m. UTC | #5
On Thu, 4 Apr 2019 21:56:19 +0300
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> wrote:

> Hello!
> 
> On 04/03/2019 12:20 PM, masonccyang@mxic.com.tw wrote:
> 
> >> >> > +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
> >> >> > +               const struct spi_mem_op *op,
> >> >> > +               u64 *offs, size_t *len)
> >> >> > +{
> >> >> > +   struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
> >> >> > +
> >> >> > +   rpc->cmd = RPC_SMCMR_CMD(op->cmd.opcode);
> >> >> > +   rpc->smenr = RPC_SMENR_CDE |
> >> >> > +           RPC_SMENR_CDB(ilog2(op->cmd.buswidth));
> >> >> > +   rpc->totalxferlen = 1;
> >> >> > +   rpc->xfer_dir = SPI_MEM_NO_DATA;
> >> >> > +   rpc->xferlen = 0;
> >> >> > +   rpc->addr = 0;
> >> >> > +
> >> >> > +   if (op->addr.nbytes) {
> >> >> > +      rpc->smenr |= RPC_SMENR_ADB(ilog2(op->addr.buswidth));
> >> >> > +      if (op->addr.nbytes == 4)
> >> >> > +         rpc->smenr |= RPC_SMENR_ADE(0xf);
> >> >> > +      else
> >> >> > +         rpc->smenr |= RPC_SMENR_ADE(0x7);
> >> >> > +
> >> >> > +      if (offs && len)
> >> >> > +         rpc->addr = *offs;
> >> >> > +      else
> >> >> > +         rpc->addr = op->addr.val;
> >> >> > +      rpc->totalxferlen += op->addr.nbytes;
> >> >> > +   }
> >> >> > +
> >> >> > +   if (op->dummy.nbytes) {
> >> >> > +      rpc->smenr |= RPC_SMENR_DME;
> >> >> > +      rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);  
> >> >>
> >> >>    So you haven't fixed this bug? I repeat, the driver doesn't work right
> >> >> w/o this fixed!  
> >> >
> >> > Do you mean
> >> >
> >> > rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes) * 8;   ?  
> >>
> >>    Yes. Or some other code that amounts to it.  
> 
>    Oops, I wasn't attentive enough, I was proposing:
> 
> 	rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes * 8);
> 
> > why not setting "op->dummy.nbytes = 7" from spi-nor.c protocol layer ?  
> 
>    We want 8 dummy clocks, not 8 dummy bytes. And if you'd looked into
> spi_nor_read_sfdp(), you'd have seen that it requests 8 dummy clocks already.
> 
> > driver may check device ID or something else to setup op->dummy.nbytes.  
> 
>    The RDSFDP command is not chip specific.
> 
> > I think it is not a good idea to *8 in spi host driver.  
> 
> >> > What is your flash part number?  
> >>
> >>    Spansion/Cypress S25FS512S. The datasheet says there must be 8 dummy cycles
> >> for the RSFDP command...
> >>  
> >> > The problem you found is in 1 bit or 4 bits width ?  
> >>
> >>    1-bit, I think.
> >>  
> >> >>
> >> >> [...]  
> >> >> > +static ssize_t rpc_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
> >> >> > +                   u64 offs, size_t len, void *buf)
> >> >> > +{
> >> >> > +   struct rpc_spi *rpc =
> >> >> > +         spi_controller_get_devdata(desc->mem->spi->controller);
> >> >> > +   int ret;
> >> >> > +
> >> >> > +   if (offs + desc->info.offset + len > U32_MAX)
> >> >> > +      return -EINVAL;
> >> >> > +
> >> >> > +   if (len > 0x4000000)
> >> >> > +      len = 0x4000000;  
> >> >>
> >> >>    Ugh...  
> >> >
> >> > by mtd->size ?  
> >>
> >>   That'd be better, yes.
> >>  
> > 
> > Oops, it seems hard to get mtd->size info. from spi_mem_dirmap,  
> 
>    It's in desc->info.length, no?

It's the lengths of the mapping which not necessarily mtd->size, but in
the SPI NOR case it is :-). Anyway, you should not assume
dirmapdesc->info.length == memory_device->size.

> 
> > I would like to keep 0x4000000.  
> 
>    I'm seeing Boris in the CC's... Boris, is it legitimate to limit
> a single dirmap read by the memory "window" size? Or should we try to 
> serve any valid transfer length?

If by memory window you're talking about the memory region reserved in
the CPU address space, then no. It should not be limited to this size
if possible. Most HW have a way to configure an offset to apply to the
spi-mem operation, and in that case, the driver should change this
offset on the fly when one tries to access a region that's outside of
the currently configured window.

> 
> >> >> > +
> >> >> > +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
> >> >> > +   if (ret)
> >> >> > +      return ret;
> >> >> > +
> >> >> > +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
> >> >> > +                &desc->info.op_tmpl, &offs, &len);
> >> >> > +
> >> >> > +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, 0);
> >> >> > +   regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RBURST(32) |
> >> >> > +           RPC_DRCR_RBE);
> >> >> > +
> >> >> > +   regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
> >> >> > +   regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));  
> >> >>
> >> >>    So you're not even trying to support flashes larger than the  
> >> read dirmap?  
> >> >> Now I don't think it's acceptable (and I have rewritten this code  
> >> internally).  
> >> >
> >> > what about the size comes form mtd->size ?  
> >>
> >>    I'm not talking about size here; we should use the full address.
> >> I'm attaching
> >> my patch...  
> > 
> > okay,got it!
> > what about just
> > -      regmap_write(rpc->mfd->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
> > +      regmap_write(rpc->mfd->regmap, RPC_DREAR,
> > +                   RPC_DREAR_EAV(offs >> 25) | RPC_DREAR_EAC(1));
> > 
> > because only > 64MByte size make RPC_DREAR_EAV() work.  
> 
>    Boris, what's your opinion on this?
>    Note that for the write dirmap we have just 256-byte buffer (reusing
> the read cache). Is it legitimate to limit the served length to 256 bytes?

I don't know what the HW is capable of, but drivers should use any try
they have to dynamically move the memory map window (make it point at a
different spi-mem offset on demand). Note that dirmap_read/write() are
allowed to return less than the amount of data requested, in that case
the caller should continue reading at the offset where things stopped.
This avoids having to implement a loop that splits things in several
accesses when the access cannot be done in one step.
Sergei Shtylyov April 6, 2019, 7:59 p.m. UTC | #6
On 04/04/2019 10:12 PM, Boris Brezillon wrote:

[...]
>>>>>>> +static ssize_t rpc_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
>>>>>>> +                   u64 offs, size_t len, void *buf)
>>>>>>> +{
>>>>>>> +   struct rpc_spi *rpc =
>>>>>>> +         spi_controller_get_devdata(desc->mem->spi->controller);
>>>>>>> +   int ret;
>>>>>>> +
>>>>>>> +   if (offs + desc->info.offset + len > U32_MAX)
>>>>>>> +      return -EINVAL;
>>>>>>> +
>>>>>>> +   if (len > 0x4000000)
>>>>>>> +      len = 0x4000000;  
>>>>>>
>>>>>>    Ugh...  
>>>>>
>>>>> by mtd->size ?  
>>>>
>>>>   That'd be better, yes.
>>>>  
>>>
>>> Oops, it seems hard to get mtd->size info. from spi_mem_dirmap,  
>>
>>    It's in desc->info.length, no?
> 
> It's the lengths of the mapping which not necessarily mtd->size, but in
> the SPI NOR case it is :-). Anyway, you should not assume
> dirmapdesc->info.length == memory_device->size.
> 
>>
>>> I would like to keep 0x4000000.  
>>
>>    I'm seeing Boris in the CC's... Boris, is it legitimate to limit
>> a single dirmap read by the memory "window" size? Or should we try to 
>> serve any valid transfer length?
> 
> If by memory window you're talking about the memory region reserved in

   Yes, we have 64 MiB window thru which we can "look into" the large MTD chips.

> the CPU address space, then no. It should not be limited to this size
> if possible.

   Mhm, so we're expected to loop incrementing the window address register
in order to serve the full xfer request?

> Most HW have a way to configure an offset to apply to the spi-mem operation,
> and in that case, the driver should change this
> offset on the fly when one tries to access a region that's outside of
> the currently configured window.

   Well, my question wasn't about that actually -- that seemed quite obvious.

>>>>>>> +
>>>>>>> +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
>>>>>>> +   if (ret)
>>>>>>> +      return ret;
>>>>>>> +
>>>>>>> +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
>>>>>>> +                &desc->info.op_tmpl, &offs, &len);
>>>>>>> +
>>>>>>> +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, 0);
>>>>>>> +   regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RBURST(32) |
>>>>>>> +           RPC_DRCR_RBE);
>>>>>>> +
>>>>>>> +   regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
>>>>>>> +   regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));  
>>>>>>
>>>>>>    So you're not even trying to support flashes larger than the  
>>>> read dirmap?  
>>>>>> Now I don't think it's acceptable (and I have rewritten this code  
>>>> internally).  
>>>>>
>>>>> what about the size comes form mtd->size ?  
>>>>
>>>>    I'm not talking about size here; we should use the full address.
>>>> I'm attaching
>>>> my patch...  
>>>
>>> okay,got it!
>>> what about just
>>> -      regmap_write(rpc->mfd->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
>>> +      regmap_write(rpc->mfd->regmap, RPC_DREAR,
>>> +                   RPC_DREAR_EAV(offs >> 25) | RPC_DREAR_EAC(1));
>>>
>>> because only > 64MByte size make RPC_DREAR_EAV() work.  
>>
>>    Boris, what's your opinion on this?
>>    Note that for the write dirmap we have just 256-byte buffer (reusing
>> the read cache). Is it legitimate to limit the served length to 256 bytes?

> I don't know what the HW is capable of,

   As I said, there's 64 MiB read window, and for the writes we can re-use the
read cache to write (exactly) 256 bytes at a time...

> but drivers should use any try
> they have to dynamically move the memory map window (make it point at a
> different spi-mem offset on demand). Note that dirmap_read/write() are
> allowed to return less than the amount of data requested, in that case
> the caller should continue reading at the offset where things stopped.
> This avoids having to implement a loop that splits things in several
> accesses when the access cannot be done in one step.

   Ah, this somewhat contradicts what you said earlier but seems clear now.
I'll go remove the loops. :-)

MBR, Sergei
Sergei Shtylyov April 9, 2019, 11:20 a.m. UTC | #7
On 04/03/2019 12:20 PM, masonccyang@mxic.com.tw wrote:

[...]
>> >> > +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
>> >> > +   if (ret)
>> >> > +      return ret;
>> >> > +
>> >> > +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
>> >> > +                &desc->info.op_tmpl, &offs, &len);
>> >> > +
>> >> > +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, 0);
>> >> > +   regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RBURST(32) |
>> >> > +           RPC_DRCR_RBE);
>> >> > +
>> >> > +   regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
>> >> > +   regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
>> >>
>> >>    So you're not even trying to support flashes larger than the
>> read dirmap?
>> >> Now I don't think it's acceptable (and I have rewritten this code
>> internally).
>> >
>> > what about the size comes form mtd->size ?
>>
>>    I'm not talking about size here; we should use the full address.
>> I'm attaching
>> my patch...
> 
> okay,got it!
> what about just
> -      regmap_write(rpc->mfd->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
> +      regmap_write(rpc->mfd->regmap, RPC_DREAR,
> +                   RPC_DREAR_EAV(offs >> 25) | RPC_DREAR_EAC(1));
> 
> because only > 64MByte size make RPC_DREAR_EAV() work.

   Seems OK now, after Boris' reply.

> thanks & best regards,
> Mason

[...]

MBR, Sergei
Sergei Shtylyov April 9, 2019, 8:07 p.m. UTC | #8
Hello!

On 03/29/2019 11:20 AM, Mason Yang wrote:

> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
> 
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[...]

> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
> new file mode 100644
> index 0000000..037f273
> --- /dev/null
> +++ b/drivers/spi/spi-renesas-rpc.c
[...]
[...]
> +static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
> +					u64 offs, size_t len, const void *buf)
> +{
> +	struct rpc_spi *rpc =
> +			spi_controller_get_devdata(desc->mem->spi->controller);
> +	int ret;
> +
> +	if (offs + desc->info.offset + len > U32_MAX)
> +		return -EINVAL;
> +
> +	if (len > RPC_WBUF_SIZE)
> +		len = RPC_WBUF_SIZE;
> +
> +	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
> +	if (ret)
> +		return ret;
> +
> +	rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
> +				    &desc->info.op_tmpl, &offs, &len);
> +
> +	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, RPC_CMNCR_MD);
> +
> +	regmap_write(rpc->regmap, RPC_SMDRENR, 0);
> +
> +	regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
> +			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
> +			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF);
> +
> +	memcpy_toio(rpc->wbuf, buf, len);

   Wait, doesn't the manual say that the whole 256-byte buffer should be
filled?  I think that short chunks have to be written w/o WBUF (done, in fact,
by the HF driver).

> +
> +	regmap_write(rpc->regmap, RPC_SMCMR, rpc->cmd);
> +	regmap_write(rpc->regmap, RPC_SMADR, offs);
> +	regmap_write(rpc->regmap, RPC_SMENR, rpc->smenr);
> +	regmap_write(rpc->regmap, RPC_SMCR, rpc->smcr | RPC_SMCR_SPIE);
> +	ret = wait_msg_xfer_end(rpc);
> +	if (ret)
> +		goto err_out;
> +
> +	regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RCF);
> +
> +	regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
> +			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
> +			   RPC_PHYCNT_STRTIM(6));
> +
> +	return len;
> +
> +err_out:
> +	return reset_control_reset(rpc->rstc);
> +}
[...]

MBR, Sergei
Marek Vasut April 10, 2019, 6:27 a.m. UTC | #9
On 4/10/19 3:33 AM, masonccyang@mxic.com.tw wrote:
> Hi Sergei,
> 
>> > +static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc
> *desc,
>> > +               u64 offs, size_t len, const void *buf)
>> > +{
>> > +   struct rpc_spi *rpc =
>> > +         spi_controller_get_devdata(desc->mem->spi->controller);
>> > +   int ret;
>> > +
>> > +   if (offs + desc->info.offset + len > U32_MAX)
>> > +      return -EINVAL;
>> > +
>> > +   if (len > RPC_WBUF_SIZE)
>> > +      len = RPC_WBUF_SIZE;
>> > +
>> > +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
>> > +   if (ret)
>> > +      return ret;
>> > +
>> > +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
>> > +                &desc->info.op_tmpl, &offs, &len);
>> > +
>> > +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD,
> RPC_CMNCR_MD);
>> > +
>> > +   regmap_write(rpc->regmap, RPC_SMDRENR, 0);
>> > +
>> > +   regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
>> > +            RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
>> > +            RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF);
>> > +
>> > +   memcpy_toio(rpc->wbuf, buf, len);
>>
>>    Wait, doesn't the manual say that the whole 256-byte buffer should be
>> filled?  I think that short chunks have to be written w/o WBUF (done,
> in fact,
>> by the HF driver).
>>
> 
> From spi-nor.c layer always transfer 256 bytes data with page program
> command.

Does that apply even for flashes with not-256-byte pages ?
Marek Vasut April 10, 2019, 8:03 a.m. UTC | #10
On 4/10/19 10:01 AM, masonccyang@mxic.com.tw wrote:
> Hi,
>  
>> Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller
> driver
>>
>> On 4/10/19 3:33 AM, masonccyang@mxic.com.tw wrote:
>> > Hi Sergei,
>> >
>> >> > +static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc
>> > *desc,
>> >> > +               u64 offs, size_t len, const void *buf)
>> >> > +{
>> >> > +   struct rpc_spi *rpc =
>> >> > +         spi_controller_get_devdata(desc->mem->spi->controller);
>> >> > +   int ret;
>> >> > +
>> >> > +   if (offs + desc->info.offset + len > U32_MAX)
>> >> > +      return -EINVAL;
>> >> > +
>> >> > +   if (len > RPC_WBUF_SIZE)
>> >> > +      len = RPC_WBUF_SIZE;
>> >> > +
>> >> > +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
>> >> > +   if (ret)
>> >> > +      return ret;
>> >> > +
>> >> > +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
>> >> > +                &desc->info.op_tmpl, &offs, &len);
>> >> > +
>> >> > +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD,
>> > RPC_CMNCR_MD);
>> >> > +
>> >> > +   regmap_write(rpc->regmap, RPC_SMDRENR, 0);
>> >> > +
>> >> > +   regmap_update_bits(rpc->regmap, RPC_PHYCNT,
> RPC_PHYCNT_STRTIM(7) |
>> >> > +            RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
>> >> > +            RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF);
>> >> > +
>> >> > +   memcpy_toio(rpc->wbuf, buf, len);
>> >>
>> >>    Wait, doesn't the manual say that the whole 256-byte buffer
> should be
>> >> filled?
> 
> it could be less than 256 bytes, i.e., 128 bytes to rpc->wbuf !
> 
>  I think that short chunks have to be written w/o WBUF (done,
>> > in fact,
>> >> by the HF driver).
>> >>
>> >
>> > From spi-nor.c layer always transfer 256 bytes data with page program
>> > command.
>>
>> Does that apply even for flashes with not-256-byte pages ?
>>
> 
> I think it needs to patch in case of nor->page_size = 512 bytes.

There are also flashes with page size < 256 bytes :)
Boris Brezillon April 10, 2019, 8:11 a.m. UTC | #11
On Wed, 10 Apr 2019 16:01:02 +0800
masonccyang@mxic.com.tw wrote:

> Hi,
>  
> > Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller   
> driver
> > 
> > On 4/10/19 3:33 AM, masonccyang@mxic.com.tw wrote:  
> > > Hi Sergei,
> > >   
> > >> > +static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc  
> > > *desc,  
> > >> > +               u64 offs, size_t len, const void *buf)
> > >> > +{
> > >> > +   struct rpc_spi *rpc =
> > >> > +         spi_controller_get_devdata(desc->mem->spi->controller);
> > >> > +   int ret;
> > >> > +
> > >> > +   if (offs + desc->info.offset + len > U32_MAX)
> > >> > +      return -EINVAL;
> > >> > +
> > >> > +   if (len > RPC_WBUF_SIZE)
> > >> > +      len = RPC_WBUF_SIZE;
> > >> > +
> > >> > +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
> > >> > +   if (ret)
> > >> > +      return ret;
> > >> > +
> > >> > +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
> > >> > +                &desc->info.op_tmpl, &offs, &len);
> > >> > +
> > >> > +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD,  
> > > RPC_CMNCR_MD);  
> > >> > +
> > >> > +   regmap_write(rpc->regmap, RPC_SMDRENR, 0);
> > >> > +
> > >> > +   regmap_update_bits(rpc->regmap, RPC_PHYCNT,   
> RPC_PHYCNT_STRTIM(7) |
> > >> > +            RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
> > >> > +            RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF);
> > >> > +
> > >> > +   memcpy_toio(rpc->wbuf, buf, len);  
> > >>
> > >>    Wait, doesn't the manual say that the whole 256-byte buffer should   
> be
> > >> filled?   
> 
> it could be less than 256 bytes, i.e., 128 bytes to rpc->wbuf !
> 
>  I think that short chunks have to be written w/o WBUF (done,
> > > in fact,  
> > >> by the HF driver).
> > >>  
> > > 
> > > From spi-nor.c layer always transfer 256 bytes data with page program
> > > command.  
> > 
> > Does that apply even for flashes with not-256-byte pages ?
> >   
> 
> I think it needs to patch in case of nor->page_size = 512 bytes.

I think the main problem here is that you assume the memory is a
NOR :-). Just do what the spi-mem user asks: if he asks you to write
X bytes, then write no more than X bytes. Use whatever trick you have
to make sure this is always true, and if this requires using a slow
path for non-aligned accesses, then do it, because it's better to have
a slow+working memory than a fast+non-working one :P.
Sergei Shtylyov April 10, 2019, 5:53 p.m. UTC | #12
Hello!

On 04/10/2019 11:01 AM, masonccyang@mxic.com.tw wrote:

>> >> > +static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc
>> > *desc,
>> >> > +               u64 offs, size_t len, const void *buf)
>> >> > +{
>> >> > +   struct rpc_spi *rpc =
>> >> > +         spi_controller_get_devdata(desc->mem->spi->controller);
>> >> > +   int ret;
>> >> > +
>> >> > +   if (offs + desc->info.offset + len > U32_MAX)
>> >> > +      return -EINVAL;
>> >> > +
>> >> > +   if (len > RPC_WBUF_SIZE)
>> >> > +      len = RPC_WBUF_SIZE;
>> >> > +
>> >> > +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
>> >> > +   if (ret)
>> >> > +      return ret;
>> >> > +
>> >> > +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
>> >> > +                &desc->info.op_tmpl, &offs, &len);
>> >> > +
>> >> > +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD,
>> > RPC_CMNCR_MD);
>> >> > +
>> >> > +   regmap_write(rpc->regmap, RPC_SMDRENR, 0);
>> >> > +
>> >> > +   regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
>> >> > +            RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
>> >> > +            RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF);
>> >> > +
>> >> > +   memcpy_toio(rpc->wbuf, buf, len);
>> >>
>> >>    Wait, doesn't the manual say that the whole 256-byte buffer should be
>> >> filled?
> 
> it could be less than 256 bytes, i.e., 128 bytes to rpc->wbuf !

   The gen3 manual 1.50 contradicts:

Note: This area should be accessed sequentially from the start address and transfer size
to the device is 256-byte unit. All Write Buffer area should be filled with transfer data
in every transfer. When accessing non-sequentially or at random, the operation is not
guaranteed. After Write Buffer Operation, this cache area must be cleared by DRCR.RCF bit.

>  I think that short chunks have to be written w/o WBUF (done,
>> > in fact,
>> >> by the HF driver).
>> >>
>> >
>> > From spi-nor.c layer always transfer 256 bytes data with page program
>> > command.
>>
>> Does that apply even for flashes with not-256-byte pages ?
>>
> 
> I think it needs to patch in case of nor->page_size = 512 bytes.

   What needs to patch what? :-)

> thanks & best regards,
> Mason

MBR, Sergei
Sergei Shtylyov April 10, 2019, 7:47 p.m. UTC | #13
On 04/09/2019 02:20 PM, Sergei Shtylyov wrote:

> [...]
>>>>>> +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
>>>>>> +   if (ret)
>>>>>> +      return ret;
>>>>>> +
>>>>>> +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
>>>>>> +                &desc->info.op_tmpl, &offs, &len);
>>>>>> +
>>>>>> +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, 0);
>>>>>> +   regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RBURST(32) |
>>>>>> +           RPC_DRCR_RBE);
>>>>>> +
>>>>>> +   regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
>>>>>> +   regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
>>>>>
>>>>>    So you're not even trying to support flashes larger than the
>>> read dirmap?
>>>>> Now I don't think it's acceptable (and I have rewritten this code
>>> internally).
>>>>
>>>> what about the size comes form mtd->size ?
>>>
>>>    I'm not talking about size here; we should use the full address.
>>> I'm attaching
>>> my patch...
>>
>> okay,got it!
>> what about just
>> -      regmap_write(rpc->mfd->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
>> +      regmap_write(rpc->mfd->regmap, RPC_DREAR,
>> +                   RPC_DREAR_EAV(offs >> 25) | RPC_DREAR_EAC(1));
>>
>> because only > 64MByte size make RPC_DREAR_EAV() work.
> 
>    Seems OK now, after Boris' reply.

   Well, actually not. The 'len' check in the beginning is oversimplified.
Attached is the patch fixing up the dirmap read path (and making it handle
flashes > 64 MiB as well)...

>> thanks & best regards,
>> Mason
> 
> [...]

MBR, Sergei
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Subject: spi: renesas-rpc: fix dirmap read

allow reading from large flashes.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 drivers/spi/spi-renesas-rpc.c   |   11 +++++++----
 include/linux/mfd/renesas-rpc.h |    2 ++
 2 files changed, 9 insertions(+), 4 deletions(-)

Index: renesas/drivers/spi/spi-renesas-rpc.c
===================================================================
--- renesas.orig/drivers/spi/spi-renesas-rpc.c
+++ renesas/drivers/spi/spi-renesas-rpc.c
@@ -264,13 +264,15 @@ static ssize_t rpc_spi_mem_dirmap_read(s
 {
 	struct rpc_spi *rpc =
 			spi_controller_get_devdata(desc->mem->spi->controller);
+	loff_t from = offs & (RPC_DIRMAP_SIZE - 1);
+	size_t size = RPC_DIRMAP_SIZE - from;
 	int ret;
 
 	if (offs + desc->info.offset + len > U32_MAX)
 		return -EINVAL;
 
-	if (len > 0x4000000)
-		len = 0x4000000;
+	if (len > size)
+		len = size;
 
 	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
 	if (ret)
@@ -284,13 +286,14 @@ static ssize_t rpc_spi_mem_dirmap_read(s
 		     RPC_DRCR_RBE);
 
 	regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
-	regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
+	regmap_write(rpc->regmap, RPC_DREAR,
+		     RPC_DREAR_EAV(offs >> 25) | RPC_DREAR_EAC(1));
 	regmap_write(rpc->regmap, RPC_DROPR, 0);
 	regmap_write(rpc->regmap, RPC_DRENR, rpc->smenr);
 	regmap_write(rpc->regmap, RPC_DRDMCR, rpc->dummy);
 	regmap_write(rpc->regmap, RPC_DRDRENR, 0);
 
-	memcpy_fromio(buf, rpc->dirmap + desc->info.offset + offs, len);
+	memcpy_fromio(buf, rpc->dirmap + desc->info.offset + from, len);
 
 	return len;
 }
Index: renesas/include/linux/mfd/renesas-rpc.h
===================================================================
--- renesas.orig/include/linux/mfd/renesas-rpc.h
+++ renesas/include/linux/mfd/renesas-rpc.h
@@ -57,6 +57,7 @@
 #define RPC_DRCMR_OCMD(c)	(((c) & 0xFF) << 0)
 
 #define RPC_DREAR		0x0014	// R/W
+#define RPC_DREAR_EAV(v)	(((v) & 0xff) << 16)
 #define RPC_DREAR_EAC(c)	(((c) & 0x7) << 0)
 
 #define RPC_DROPR		0x0018	// R/W
@@ -140,6 +141,7 @@
 #define RPC_PHYOFFSET2		0x0084	// R/W
 #define RPC_PHYOFFSET2_OCTTMG(v) (((v) & 0x7) << 8)
 
+#define RPC_DIRMAP_SIZE		0x4000000
 #define RPC_WBUF_SIZE		256	// Write Buffer size
 
 struct rpc {
Sergei Shtylyov April 13, 2019, 4:38 p.m. UTC | #14
Hello!

On 03/29/2019 11:20 AM, Mason Yang wrote:

> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
> 
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[...]
> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
> new file mode 100644
> index 0000000..037f273
> --- /dev/null
> +++ b/drivers/spi/spi-renesas-rpc.c
[...]
> +static int rpc_spi_probe(struct platform_device *pdev)
> +{
> +	struct spi_controller *ctlr;
> +	struct rpc_mfd *rpc_mfd = dev_get_drvdata(pdev->dev.parent);
> +	struct rpc_spi *rpc;
> +	int ret;
> +
> +	ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
> +	if (!ctlr)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, ctlr);
> +
> +	rpc = spi_controller_get_devdata(ctlr);
> +
> +	ctlr->dev.of_node = pdev->dev.of_node;
[...]
> +
> +	pm_runtime_enable(&pdev->dev);
> +	ctlr->auto_runtime_pm = true;

   I think this line no longer works as expected with the new probing scheme.
Have you tested reading? v8 patch still works while v9 patches hang on doing:

$ cat /dev/mtd<n>...

[...]
Sergei Shtylyov April 13, 2019, 4:39 p.m. UTC | #15
On 04/13/2019 07:38 PM, Sergei Shtylyov wrote:

>> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
>>
>> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> [...]
>> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
>> new file mode 100644
>> index 0000000..037f273
>> --- /dev/null
>> +++ b/drivers/spi/spi-renesas-rpc.c
> [...]
>> +static int rpc_spi_probe(struct platform_device *pdev)
>> +{
>> +	struct spi_controller *ctlr;
>> +	struct rpc_mfd *rpc_mfd = dev_get_drvdata(pdev->dev.parent);
>> +	struct rpc_spi *rpc;
>> +	int ret;
>> +
>> +	ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
>> +	if (!ctlr)
>> +		return -ENOMEM;
>> +
>> +	platform_set_drvdata(pdev, ctlr);
>> +
>> +	rpc = spi_controller_get_devdata(ctlr);
>> +
>> +	ctlr->dev.of_node = pdev->dev.of_node;
> [...]
>> +
>> +	pm_runtime_enable(&pdev->dev);
>> +	ctlr->auto_runtime_pm = true;
> 
>    I think this line no longer works as expected with the new probing scheme.
> Have you tested reading? v8 patch still works while v9 patches hang on doing:
> 
> $ cat /dev/mtd<n>...

   Sorry, 'od -x', not 'cat'.

WBR, Sergei
Sergei Shtylyov April 17, 2019, 6:44 p.m. UTC | #16
On 04/15/2019 05:36 AM, masonccyang@mxic.com.tw wrote:

>> >> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
>> >>
>> >> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
>> >> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> > [...]
>> >> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
>> >> new file mode 100644
>> >> index 0000000..037f273
>> >> --- /dev/null
>> >> +++ b/drivers/spi/spi-renesas-rpc.c
>> > [...]
>> >> +static int rpc_spi_probe(struct platform_device *pdev)
>> >> +{
>> >> +   struct spi_controller *ctlr;
>> >> +   struct rpc_mfd *rpc_mfd = dev_get_drvdata(pdev->dev.parent);
>> >> +   struct rpc_spi *rpc;
>> >> +   int ret;
>> >> +
>> >> +   ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
>> >> +   if (!ctlr)
>> >> +      return -ENOMEM;
>> >> +
>> >> +   platform_set_drvdata(pdev, ctlr);
>> >> +
>> >> +   rpc = spi_controller_get_devdata(ctlr);
>> >> +
>> >> +   ctlr->dev.of_node = pdev->dev.of_node;
>> > [...]
>> >> +
>> >> +   pm_runtime_enable(&pdev->dev);
>> >> +   ctlr->auto_runtime_pm = true;
>> >
>> >    I think this line no longer works as expected with the new
>> probing scheme.

   That's because we added another (SPI) device under our MFD.

>> > Have you tested reading? v8 patch still works while v9 patches
>> > hang on doing:
>> >
>> > $ cat /dev/mtd<n>...
>>
>>    Sorry, 'od -x', not 'cat'.
> 
> root@draak:/# cat /proc/mtd
> dev:    size   erasesize  name
> mtd0: 00040000 00001000 "Bank 1 - Boot parameter"
> mtd1: 00140000 00001000 "Bank 1 - Loader-BL2"
> mtd2: 00040000 00001000 "Bank 1 - Certification"
> mtd3: 00080000 00001000 "Bank 1 - ARM Trusted FW"
> mtd4: 00400000 00001000 "Bank 1 - Reserved-1"
> mtd5: 00300000 00001000 "Bank 1 - U-Boot"
> mtd6: 00200000 00001000 "Bank 1 - Reserved-2"
> mtd7: 00480000 00001000 "Bank 1 - Splash"
> mtd8: 00040000 00001000 "Bank 1 - Device Tree"
> root@draak:/# od -x /dev/mtd1
> 0000000 0000 d280 0001 d280 0002 d280 0003 d280
> 0000020 0004 d280 0005 d280 0006 d280 0007 d280
> 0000040 0008 d280 0009 d280 000a d280 000b d280
> 0000060 000c d280 000d d280 000e d280 000f d280
> 0000100 0010 d280 0011 d280 0012 d280 0013 d280
> 0000120 0014 d280 0015 d280 0016 d280 0017 d280
> 0000140 0018 d280 0019 d280 001a d280 001b d280
> 0000160 001c d280 001d d280 001e d280 1000 d53e
> 0000200 f800 9266 1000 d51e 3fdf d503 3ba0 1005

   Still hangs for me. After I patches spi-mem.c and the driver to
call RPM for the MFD, it started working again. Perhaps, that clock
is still enabled on your target. What does the following print (for
the RPC clocks)?

$ mount none -t debugfs /sys/kernel/debug/
$ cat /sys/kernel/debug/clk/clk_summary

> fyi~
> 
> best regards,
> Mason

MBR, Sergei
Sergei Shtylyov April 18, 2019, 7:43 p.m. UTC | #17
On 04/18/2019 05:51 AM, masonccyang@mxic.com.tw wrote:

>> >> >> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
>> >> >>
>> >> >> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
>> >> >> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> >> > [...]
>> >> >> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-
>> renesas-rpc.c
>> >> >> new file mode 100644
>> >> >> index 0000000..037f273
>> >> >> --- /dev/null
>> >> >> +++ b/drivers/spi/spi-renesas-rpc.c
>> >> > [...]
>> >> >> +static int rpc_spi_probe(struct platform_device *pdev)
>> >> >> +{
>> >> >> +   struct spi_controller *ctlr;
>> >> >> +   struct rpc_mfd *rpc_mfd = dev_get_drvdata(pdev->dev.parent);
>> >> >> +   struct rpc_spi *rpc;
>> >> >> +   int ret;
>> >> >> +
>> >> >> +   ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
>> >> >> +   if (!ctlr)
>> >> >> +      return -ENOMEM;
>> >> >> +
>> >> >> +   platform_set_drvdata(pdev, ctlr);
>> >> >> +
>> >> >> +   rpc = spi_controller_get_devdata(ctlr);
>> >> >> +
>> >> >> +   ctlr->dev.of_node = pdev->dev.of_node;
>> >> > [...]
>> >> >> +
>> >> >> +   pm_runtime_enable(&pdev->dev);
>> >> >> +   ctlr->auto_runtime_pm = true;
>> >> >
>> >> >    I think this line no longer works as expected with the new
>> >> probing scheme.
>>
>>    That's because we added another (SPI) device under our MFD.
> 
> Do you mean just to remove one line
> ctlr->auto_runtime_pm = true;
> ?

   No, you should explicitly call RPM for the MFD (not the SPI device).

>> >> > Have you tested reading? v8 patch still works while v9 patches
>> >> > hang on doing:
>> >> >
>> >> > $ cat /dev/mtd<n>...
>> >>
>> >>    Sorry, 'od -x', not 'cat'.
>> >
>> > root@draak:/# cat /proc/mtd
>> > dev:    size   erasesize  name
>> > mtd0: 00040000 00001000 "Bank 1 - Boot parameter"
>> > mtd1: 00140000 00001000 "Bank 1 - Loader-BL2"
>> > mtd2: 00040000 00001000 "Bank 1 - Certification"
>> > mtd3: 00080000 00001000 "Bank 1 - ARM Trusted FW"
>> > mtd4: 00400000 00001000 "Bank 1 - Reserved-1"
>> > mtd5: 00300000 00001000 "Bank 1 - U-Boot"
>> > mtd6: 00200000 00001000 "Bank 1 - Reserved-2"
>> > mtd7: 00480000 00001000 "Bank 1 - Splash"
>> > mtd8: 00040000 00001000 "Bank 1 - Device Tree"
>> > root@draak:/# od -x /dev/mtd1
>> > 0000000 0000 d280 0001 d280 0002 d280 0003 d280
>> > 0000020 0004 d280 0005 d280 0006 d280 0007 d280
>> > 0000040 0008 d280 0009 d280 000a d280 000b d280
>> > 0000060 000c d280 000d d280 000e d280 000f d280
>> > 0000100 0010 d280 0011 d280 0012 d280 0013 d280
>> > 0000120 0014 d280 0015 d280 0016 d280 0017 d280
>> > 0000140 0018 d280 0019 d280 001a d280 001b d280
>> > 0000160 001c d280 001d d280 001e d280 1000 d53e
>> > 0000200 f800 9266 1000 d51e 3fdf d503 3ba0 1005
>>
>>    Still hangs for me. After I patches spi-mem.c and the driver to
>> call RPM for the MFD, it started working again. Perhaps, that clock
>> is still enabled on your target. What does the following print (for
>> the RPC clocks)?
>>
>> $ mount none -t debugfs /sys/kernel/debug/
>> $ cat /sys/kernel/debug/clk/clk_summary
>>
> 
> root@draak:/# cat /sys/kernel/debug/clk/clk_summary
>                                  enable  prepare  protect                                duty
>    clock                          count    count    count        rate   accuracy phase  cycle
> ---------------------------------------------------------------------------------------------
>  audio_clkout1                        0        0        0    11289600          0     0  50000
>  x19_clk                              0        0        0    24576000          0     0  50000
>  dclkin-0                             0        0        0           0          0     0  50000
>  scif                                 1        1        0           0          0     0  50000
>  audio_clkb                           0        0        0    22579200          0     0  50000
>  msiof-ref-clock                      0        0        0    66666666          0     0  50000
>  extal                                2        3        0    48000000          0     0  50000
>     r                                 0        2        0       31250          0     0  50000
>        rpc-if                         0        1        0       31250          0     0  50000

   This looks wrong, the RPC-IF module clock should have RPC or RPCD2 (where ae they?)
as a source, not RLCK...

>        rwdt                           0        1        0       31250          0     0  50000
>        cmt0                           0        0        0       31250          0     0  50000
>        cmt1                           0        0        0       31250          0     0  50000
>        cmt2                           0        0        0       31250          0     0  50000
>        cmt3                           0        0        0       31250          0     0  50000
>     osc                               0        0        0      125000          0     0  50000
> 
> 
> thanks & best regards,
> Mason

MBR, Sergei
Sergei Shtylyov April 22, 2019, 4:44 p.m. UTC | #18
On 04/19/2019 12:31 PM, masonccyang@mxic.com.tw wrote:

>> > Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
>> >
>> > On 04/18/2019 05:51 AM, masonccyang@mxic.com.tw wrote:
>> >
>> > >> >> >> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
>> > >> >> >>
>> > >> >> >> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
>> > >> >> >> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> > >> >> > [...]
>> > >> >> >> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-
>> > >> renesas-rpc.c
>> > >> >> >> new file mode 100644
>> > >> >> >> index 0000000..037f273
>> > >> >> >> --- /dev/null
>> > >> >> >> +++ b/drivers/spi/spi-renesas-rpc.c
>> > >> >> > [...]
>> > >> >> >> +static int rpc_spi_probe(struct platform_device *pdev)
>> > >> >> >> +{
>> > >> >> >> +   struct spi_controller *ctlr;
>> > >> >> >> +   struct rpc_mfd *rpc_mfd = dev_get_drvdata(pdev->dev.parent);
>> > >> >> >> +   struct rpc_spi *rpc;
>> > >> >> >> +   int ret;
>> > >> >> >> +
>> > >> >> >> +   ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
>> > >> >> >> +   if (!ctlr)
>> > >> >> >> +      return -ENOMEM;
>> > >> >> >> +
>> > >> >> >> +   platform_set_drvdata(pdev, ctlr);
>> > >> >> >> +
>> > >> >> >> +   rpc = spi_controller_get_devdata(ctlr);
>> > >> >> >> +
>> > >> >> >> +   ctlr->dev.of_node = pdev->dev.of_node;
>> > >> >> > [...]
>> > >> >> >> +
>> > >> >> >> +   pm_runtime_enable(&pdev->dev);
>> > >> >> >> +   ctlr->auto_runtime_pm = true;
>> > >> >> >
>> > >> >> >    I think this line no longer works as expected with the new
>> > >> >> probing scheme.
>> > >>
>> > >>    That's because we added another (SPI) device under our MFD.
>> > >
>> > > Do you mean just to remove one line
>> > > ctlr->auto_runtime_pm = true;
>> > > ?
> 
>> how did you test it ?
>> what is your testing flow ?

   I think I've patched drivers/spi/spi-mem.c to get spi_mem_access_{start|end}()
to be called with ctlr->dev.parent->parent as an arg...

>> >    No, you should explicitly call RPM for the MFD (not the SPI device).
>>
>> okay, patch RPM to RPC MFD and will remove SPI RPM enable part.
> 
> wait! I test it ok.
> 
> Don't need to patch RPM to RPC MFD, just keep RPM in SPI.
> 
> root@draak:/sys/power# echo mem > state
> [  135.848711] PM: suspend entry (s2idle)
> [  135.852777] PM: Syncing filesystems ... done.
> [  135.869468] Freezing user space processes ... (elapsed 0.002 seconds) done.
> [  135.879962] OOM killer disabled.
> [  135.883257] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
> [  135.893474] Suspending console(s) (use no_console_suspend to debug)
> [  135.910946] [Mason] rpc_spi_suspend
> [  135.986022] PM: suspend devices took 0.084 seconds
> [  135.986047] PM: suspend debug: Waiting for 5 second(s).
> [  141.142024] [Mason] rpc_spi_resume
> [  141.220859] PM: resume devices took 0.116 seconds
> [  141.243179] OOM killer enabled.
> [  141.246417] Restarting tasks ... done.
> [  141.266579] PM: suspend exit
> root@draak:/sys/power#

   That's not *runtime* PM, it's the *plain* PM you're testing here...

> thanks & best regards,
> Mason

MBR, Sergei
Geert Uytterhoeven April 23, 2019, 7:29 a.m. UTC | #19
Hi Mason,

On Fri, Apr 19, 2019 at 7:39 AM <masonccyang@mxic.com.tw> wrote:
> > Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
> > On 04/18/2019 05:51 AM, masonccyang@mxic.com.tw wrote:
> > >>    Still hangs for me. After I patches spi-mem.c and the driver to
> > >> call RPM for the MFD, it started working again. Perhaps, that clock
> > >> is still enabled on your target. What does the following print (for
> > >> the RPC clocks)?
> > >>
> > >> $ mount none -t debugfs /sys/kernel/debug/
> > >> $ cat /sys/kernel/debug/clk/clk_summary
> > >>
> > >
> > > root@draak:/# cat /sys/kernel/debug/clk/clk_summary
> > >                                  enable  prepare  protect              duty
> > >    clock                          count    count    count
> > rate   accuracy phase  cycle
> > >
> > ---------------------------------------------------------------------------------------------
> > >  audio_clkout1                        0        0        0     11289600          0     0  50000
> > >  x19_clk                              0        0        0    24576000          0     0  50000
> > >  dclkin-0                             0        0        0        0          0     0  50000
> > >  scif                                 1        1        0        0          0     0  50000
> > >  audio_clkb                           0        0        0    22579200          0     0  50000
> > >  msiof-ref-clock                      0        0        0    66666666          0     0  50000
> > >  extal                                2        3        0    48000000          0     0  50000
> > >     r                                 0        2        0      31250          0     0  50000
> > >        rpc-if                         0        1        0      31250          0     0  50000
> >
> >    This looks wrong, the RPC-IF module clock should have RPC or
> > RPCD2 (where ae they?)
> > as a source, not RLCK...
>
> I check the Ch8 CPG of R-Car datasheet, figure 8.1f(R-Car D3),
> the RPC/RPCD2 is derived from PLL1 -> PLL1CK
>
> I didn't patch it and it should be exposed afrer the .sdsrc
>
>     .main                                 2            2    48000000          0 0
>        .pll3                              0            0   928000000          0 0
>        .pll1                              4            4  1600000000          0 0
>           lv1                             0            0  1600000000          0 0
>           lv0                             1            1  1600000000          0 0
>              lvds                         1            1  1600000000          0 0
>           cl                              0            0    33333333          0 0
>           zx                              0            0   533333333          0 0
>           zt                              0            0   400000000          0 0
>           ztr                             0            0   266666666          0 0
>           .sdsrc                          1            1   800000000          0 0
>              sd0                          1            1   200000000          0 0
>                 emmc0
> ---> here !

Upstream drivers/clk/renesas/r8a77995-cpg-mssr.c does not have the "rpc-if"
clock, and we have not yet seen the patch to add it that you must be using
to make your driver work.  If the clock is defined wrongly, that might
explain why your driver is working for you, but not for Sergei.

Gr{oetje,eeting}s,

                        Geert
Sergei Shtylyov May 14, 2019, 7:06 p.m. UTC | #20
Hello!

On 04/19/2019 08:38 AM, masonccyang@mxic.com.tw wrote:

>> >> >> >> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
>> >> >> >>
>> >> >> >> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
>> >> >> >> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> >> >> > [...]
>> >> >> >> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-
>> >> renesas-rpc.c
>> >> >> >> new file mode 100644
>> >> >> >> index 0000000..037f273
>> >> >> >> --- /dev/null
>> >> >> >> +++ b/drivers/spi/spi-renesas-rpc.c
>> >> >> > [...]
>> >> >> >> +static int rpc_spi_probe(struct platform_device *pdev)
>> >> >> >> +{
>> >> >> >> +   struct spi_controller *ctlr;
>> >> >> >> +   struct rpc_mfd *rpc_mfd = dev_get_drvdata(pdev->dev.parent);
>> >> >> >> +   struct rpc_spi *rpc;
>> >> >> >> +   int ret;
>> >> >> >> +
>> >> >> >> +   ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
>> >> >> >> +   if (!ctlr)
>> >> >> >> +      return -ENOMEM;
>> >> >> >> +
>> >> >> >> +   platform_set_drvdata(pdev, ctlr);
>> >> >> >> +
>> >> >> >> +   rpc = spi_controller_get_devdata(ctlr);
>> >> >> >> +
>> >> >> >> +   ctlr->dev.of_node = pdev->dev.of_node;
>> >> >> > [...]
>> >> >> >> +
>> >> >> >> +   pm_runtime_enable(&pdev->dev);
>> >> >> >> +   ctlr->auto_runtime_pm = true;
>> >> >> >
>> >> >> >    I think this line no longer works as expected with the new
>> >> >> probing scheme.
>> >>
>> >>    That's because we added another (SPI) device under our MFD.
>> >
>> > Do you mean just to remove one line
>> > ctlr->auto_runtime_pm = true;
>> > ?
> 
> how did you test it ?
> what is your testing flow ?
> 
>>    No, you should explicitly call RPM for the MFD (not the SPI device).
> 
> okay, patch RPM to RPC MFD and will remove SPI RPM enable part.
> 
>>
>> >> >> > Have you tested reading? v8 patch still works while v9 patches
>> >> >> > hang on doing:
>> >> >> >
>> >> >> > $ cat /dev/mtd<n>...
>> >> >>
>> >> >>    Sorry, 'od -x', not 'cat'.
>> >> >
>> >> > root@draak:/# cat /proc/mtd
>> >> > dev:    size   erasesize  name
>> >> > mtd0: 00040000 00001000 "Bank 1 - Boot parameter"
>> >> > mtd1: 00140000 00001000 "Bank 1 - Loader-BL2"
>> >> > mtd2: 00040000 00001000 "Bank 1 - Certification"
>> >> > mtd3: 00080000 00001000 "Bank 1 - ARM Trusted FW"
>> >> > mtd4: 00400000 00001000 "Bank 1 - Reserved-1"
>> >> > mtd5: 00300000 00001000 "Bank 1 - U-Boot"
>> >> > mtd6: 00200000 00001000 "Bank 1 - Reserved-2"
>> >> > mtd7: 00480000 00001000 "Bank 1 - Splash"
>> >> > mtd8: 00040000 00001000 "Bank 1 - Device Tree"
>> >> > root@draak:/# od -x /dev/mtd1
>> >> > 0000000 0000 d280 0001 d280 0002 d280 0003 d280
>> >> > 0000020 0004 d280 0005 d280 0006 d280 0007 d280
>> >> > 0000040 0008 d280 0009 d280 000a d280 000b d280
>> >> > 0000060 000c d280 000d d280 000e d280 000f d280
>> >> > 0000100 0010 d280 0011 d280 0012 d280 0013 d280
>> >> > 0000120 0014 d280 0015 d280 0016 d280 0017 d280
>> >> > 0000140 0018 d280 0019 d280 001a d280 001b d280
>> >> > 0000160 001c d280 001d d280 001e d280 1000 d53e
>> >> > 0000200 f800 9266 1000 d51e 3fdf d503 3ba0 1005
>> >>
>> >>    Still hangs for me. After I patches spi-mem.c and the driver to
>> >> call RPM for the MFD, it started working again. Perhaps, that clock>> >> is still enabled on your target. What does the following print (for

   Even with these issues worked around, I still see strange behavior on
writes, e.g. after I mount JFFS2 partition, remove 1 file, unmount, re-mount,
and mount again, the removed file is back! :-/

[...]

> thanks & best regards,
> Mason

MBR, Sergei
Sergei Shtylyov May 14, 2019, 7:13 p.m. UTC | #21
On 05/14/2019 10:06 PM, Sergei Shtylyov wrote:

[...]
>>>>>>>> Have you tested reading? v8 patch still works while v9 patches
>>>>>>>> hang on doing:
>>>>>>>>
>>>>>>>> $ cat /dev/mtd<n>...
>>>>>>>
>>>>>>>    Sorry, 'od -x', not 'cat'.
>>>>>>
>>>>>> root@draak:/# cat /proc/mtd
>>>>>> dev:    size   erasesize  name
>>>>>> mtd0: 00040000 00001000 "Bank 1 - Boot parameter"
>>>>>> mtd1: 00140000 00001000 "Bank 1 - Loader-BL2"
>>>>>> mtd2: 00040000 00001000 "Bank 1 - Certification"
>>>>>> mtd3: 00080000 00001000 "Bank 1 - ARM Trusted FW"
>>>>>> mtd4: 00400000 00001000 "Bank 1 - Reserved-1"
>>>>>> mtd5: 00300000 00001000 "Bank 1 - U-Boot"
>>>>>> mtd6: 00200000 00001000 "Bank 1 - Reserved-2"
>>>>>> mtd7: 00480000 00001000 "Bank 1 - Splash"
>>>>>> mtd8: 00040000 00001000 "Bank 1 - Device Tree"
>>>>>> root@draak:/# od -x /dev/mtd1
>>>>>> 0000000 0000 d280 0001 d280 0002 d280 0003 d280
>>>>>> 0000020 0004 d280 0005 d280 0006 d280 0007 d280
>>>>>> 0000040 0008 d280 0009 d280 000a d280 000b d280
>>>>>> 0000060 000c d280 000d d280 000e d280 000f d280
>>>>>> 0000100 0010 d280 0011 d280 0012 d280 0013 d280
>>>>>> 0000120 0014 d280 0015 d280 0016 d280 0017 d280
>>>>>> 0000140 0018 d280 0019 d280 001a d280 001b d280
>>>>>> 0000160 001c d280 001d d280 001e d280 1000 d53e
>>>>>> 0000200 f800 9266 1000 d51e 3fdf d503 3ba0 1005
>>>>>
>>>>>    Still hangs for me. After I patches spi-mem.c and the driver to
>>>>> call RPM for the MFD, it started working again. Perhaps, that clock>> >> is still enabled on your target. What does the following print (for
> 
>    Even with these issues worked around, I still see strange behavior on
> writes, e.g. after I mount JFFS2 partition, remove 1 file, unmount, re-mount,
> and mount again, the removed file is back! :-/

   Too many re-mounts, one was enough. :-)

> [...]
> 
>> thanks & best regards,
>> Mason

MBR, Sergei
diff mbox series

Patch

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index f761655..1f52bcf 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -564,6 +564,12 @@  config SPI_RSPI
 	help
 	  SPI driver for Renesas RSPI and QSPI blocks.
 
+config SPI_RENESAS_RPC
+	tristate "Renesas R-Car Gen3 RPC-IF controller"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	help
+	  SPI driver for Renesas R-Car Gen3 RPC-IF.
+
 config SPI_QCOM_QSPI
 	tristate "QTI QSPI controller"
 	depends on ARCH_QCOM
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index d8fc03c..b3a3deb 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -86,6 +86,7 @@  obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
 obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
 obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
 obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
+obj-$(CONFIG_SPI_RENESAS_RPC)		+= spi-renesas-rpc.o
 obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
 spi-s3c24xx-hw-y			:= spi-s3c24xx.o
 spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
new file mode 100644
index 0000000..037f273
--- /dev/null
+++ b/drivers/spi/spi-renesas-rpc.c
@@ -0,0 +1,640 @@ 
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp.
+// Copyright (C) 2019 Macronix International Co., Ltd.
+//
+// R-Car Gen3 RPC-IF SPI/QSPI/Octa driver
+//
+// Author:
+//	Mason Yang <masonccyang@mxic.com.tw>
+//
+
+#include <linux/mfd/renesas-rpc.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#include <asm/unaligned.h>
+
+struct rpc_spi {
+	struct clk *clk_rpc;
+	void __iomem *base;
+	void __iomem *dirmap;
+	void __iomem *wbuf;
+	struct regmap *regmap;
+	u32 cur_speed_hz;
+	u32 cmd;
+	u32 addr;
+	u32 dummy;
+	u32 smcr;
+	u32 smenr;
+	u32 xferlen;
+	u32 totalxferlen;
+	enum spi_mem_data_dir xfer_dir;
+	struct reset_control *rstc;
+};
+
+static int rpc_spi_set_freq(struct rpc_spi *rpc, unsigned long freq)
+{
+	int ret;
+
+	if (rpc->cur_speed_hz == freq)
+		return 0;
+
+	ret = clk_set_rate(rpc->clk_rpc, freq);
+	if (ret)
+		return ret;
+
+	rpc->cur_speed_hz = freq;
+	return ret;
+}
+
+static void rpc_spi_hw_init(struct rpc_spi *rpc)
+{
+	//
+	// NOTE: The 0x260 are undocumented bits, but they must be set.
+	//	 RPC_PHYCNT_STRTIM is strobe timing adjustment bit,
+	//	 0x0 : the delay is biggest,
+	//	 0x1 : the delay is 2nd biggest,
+	//	 On H3 ES1.x, the value should be 0, while on others,
+	//	 the value should be 6.
+	//
+	regmap_write(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_CAL |
+				  RPC_PHYCNT_STRTIM(6) | 0x260);
+
+	//
+	// NOTE: The 0x1511144 are undocumented bits, but they must be set
+	//       for RPC_PHYOFFSET1.
+	//	 The 0x31 are undocumented bits, but they must be set
+	//	 for RPC_PHYOFFSET2.
+	//
+	regmap_write(rpc->regmap, RPC_PHYOFFSET1, RPC_PHYOFFSET1_DDRTMG(3) |
+		     0x1511144);
+	regmap_write(rpc->regmap, RPC_PHYOFFSET2, 0x31 |
+		     RPC_PHYOFFSET2_OCTTMG(4));
+	regmap_write(rpc->regmap, RPC_SSLDR, RPC_SSLDR_SPNDL(7) |
+		     RPC_SSLDR_SLNDL(7) | RPC_SSLDR_SCKDL(7));
+	regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD | RPC_CMNCR_SFDE |
+		     RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ |
+		     RPC_CMNCR_BSZ(0));
+}
+
+static int wait_msg_xfer_end(struct rpc_spi *rpc)
+{
+	u32 sts;
+
+	return regmap_read_poll_timeout(rpc->regmap, RPC_CMNSR, sts,
+					sts & RPC_CMNSR_TEND, 0, USEC_PER_SEC);
+}
+
+static u8 rpc_bits_set(u32 nbytes)
+{
+	nbytes = clamp(nbytes, 1U, 4U);
+
+	return GENMASK(3, 4 - nbytes);
+}
+
+static int rpc_spi_io_xfer(struct rpc_spi *rpc,
+			   const void *tx_buf, void *rx_buf)
+{
+	u32 smenr, smcr, data, pos = 0;
+	int ret;
+
+	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, RPC_CMNCR_MD);
+	regmap_write(rpc->regmap, RPC_SMDRENR, 0);
+	regmap_write(rpc->regmap, RPC_SMCMR, rpc->cmd);
+	regmap_write(rpc->regmap, RPC_SMDMCR, rpc->dummy);
+	regmap_write(rpc->regmap, RPC_SMADR, rpc->addr);
+	smenr = rpc->smenr;
+
+	if (tx_buf) {
+		while (pos < rpc->xferlen) {
+			u32 nbytes = rpc->xferlen - pos;
+
+			regmap_write(rpc->regmap, RPC_SMWDR0,
+				     get_unaligned((u32 *)(tx_buf + pos)));
+
+			smcr = rpc->smcr | RPC_SMCR_SPIE;
+
+			if (nbytes > 4) {
+				nbytes = 4;
+				smcr |= RPC_SMCR_SSLKP;
+			}
+
+			regmap_write(rpc->regmap, RPC_SMENR, smenr);
+			regmap_write(rpc->regmap, RPC_SMCR, smcr);
+			ret = wait_msg_xfer_end(rpc);
+			if (ret)
+				goto err_out;
+
+			pos += nbytes;
+			smenr = rpc->smenr & ~RPC_SMENR_CDE &
+					     ~RPC_SMENR_ADE(0xf);
+		}
+	} else if (rx_buf) {
+		//
+		// RPC-IF spoils the data for the commands without an address
+		// phase (like RDID) in the manual mode, so we'll have to work
+		// around this issue by using the external address space read
+		// mode instead.
+		//
+		if (!(smenr & RPC_SMENR_ADE(0xf)) && rpc->dirmap) {
+			regmap_update_bits(rpc->regmap, RPC_CMNCR,
+					   RPC_CMNCR_MD, 0);
+			regmap_write(rpc->regmap, RPC_DRCR,
+				     RPC_DRCR_RBURST(32) | RPC_DRCR_RBE);
+			regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
+			regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
+			regmap_write(rpc->regmap, RPC_DRDMCR, rpc->dummy);
+			regmap_write(rpc->regmap, RPC_DROPR, 0);
+			regmap_write(rpc->regmap, RPC_DRENR, smenr);
+			memcpy_fromio(rx_buf, rpc->dirmap, rpc->xferlen);
+			regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RCF);
+		} else {
+			while (pos < rpc->xferlen) {
+				u32 nbytes = rpc->xferlen - pos;
+
+				if (nbytes > 4)
+					nbytes = 4;
+
+				regmap_write(rpc->regmap, RPC_SMENR, smenr);
+				regmap_write(rpc->regmap, RPC_SMCR, rpc->smcr |
+					     RPC_SMCR_SPIE);
+				ret = wait_msg_xfer_end(rpc);
+				if (ret)
+					goto err_out;
+
+				regmap_read(rpc->regmap, RPC_SMRDR0, &data);
+				memcpy(rx_buf + pos, &data, nbytes);
+				pos += nbytes;
+
+				regmap_write(rpc->regmap, RPC_SMADR,
+					     rpc->addr + pos);
+			}
+		}
+	} else {
+		regmap_write(rpc->regmap, RPC_SMENR, rpc->smenr);
+		regmap_write(rpc->regmap, RPC_SMCR, rpc->smcr | RPC_SMCR_SPIE);
+		ret = wait_msg_xfer_end(rpc);
+		if (ret)
+			goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	return reset_control_reset(rpc->rstc);
+}
+
+static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
+					const struct spi_mem_op *op,
+					u64 *offs, size_t *len)
+{
+	struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
+
+	rpc->cmd = RPC_SMCMR_CMD(op->cmd.opcode);
+	rpc->smenr = RPC_SMENR_CDE |
+		     RPC_SMENR_CDB(ilog2(op->cmd.buswidth));
+	rpc->totalxferlen = 1;
+	rpc->xfer_dir = SPI_MEM_NO_DATA;
+	rpc->xferlen = 0;
+	rpc->addr = 0;
+
+	if (op->addr.nbytes) {
+		rpc->smenr |= RPC_SMENR_ADB(ilog2(op->addr.buswidth));
+		if (op->addr.nbytes == 4)
+			rpc->smenr |= RPC_SMENR_ADE(0xf);
+		else
+			rpc->smenr |= RPC_SMENR_ADE(0x7);
+
+		if (offs && len)
+			rpc->addr = *offs;
+		else
+			rpc->addr = op->addr.val;
+		rpc->totalxferlen += op->addr.nbytes;
+	}
+
+	if (op->dummy.nbytes) {
+		rpc->smenr |= RPC_SMENR_DME;
+		rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
+		rpc->totalxferlen += op->dummy.nbytes;
+	}
+
+	if (op->data.nbytes || (offs && len)) {
+		switch (op->data.dir) {
+		case SPI_MEM_DATA_IN:
+			rpc->smcr = RPC_SMCR_SPIRE;
+			rpc->xfer_dir = SPI_MEM_DATA_IN;
+			break;
+		case SPI_MEM_DATA_OUT:
+			rpc->smcr = RPC_SMCR_SPIWE;
+			rpc->xfer_dir = SPI_MEM_DATA_OUT;
+			break;
+		default:
+			break;
+		}
+
+		if (offs && len) {
+			rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_set(*len)) |
+				      RPC_SMENR_SPIDB(ilog2(op->data.buswidth));
+			rpc->xferlen = *len;
+			rpc->totalxferlen += *len;
+		} else {
+			rpc->smenr |=
+				RPC_SMENR_SPIDE(rpc_bits_set(op->data.nbytes)) |
+				RPC_SMENR_SPIDB(ilog2(op->data.buswidth));
+			rpc->xferlen = op->data.nbytes;
+			rpc->totalxferlen += op->data.nbytes;
+		}
+	}
+}
+
+static bool rpc_spi_mem_supports_op(struct spi_mem *mem,
+				    const struct spi_mem_op *op)
+{
+	if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
+	    op->dummy.buswidth > 4 || op->cmd.buswidth > 4 ||
+	    op->addr.nbytes > 4)
+		return false;
+
+	return true;
+}
+
+static ssize_t rpc_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+				       u64 offs, size_t len, void *buf)
+{
+	struct rpc_spi *rpc =
+			spi_controller_get_devdata(desc->mem->spi->controller);
+	int ret;
+
+	if (offs + desc->info.offset + len > U32_MAX)
+		return -EINVAL;
+
+	if (len > 0x4000000)
+		len = 0x4000000;
+
+	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
+
+	rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
+				    &desc->info.op_tmpl, &offs, &len);
+
+	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, 0);
+	regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RBURST(32) |
+		     RPC_DRCR_RBE);
+
+	regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
+	regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
+	regmap_write(rpc->regmap, RPC_DROPR, 0);
+	regmap_write(rpc->regmap, RPC_DRENR, rpc->smenr);
+	regmap_write(rpc->regmap, RPC_DRDMCR, rpc->dummy);
+	regmap_write(rpc->regmap, RPC_DRDRENR, 0);
+
+	memcpy_fromio(buf, rpc->dirmap + desc->info.offset + offs, len);
+
+	return len;
+}
+
+static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+					u64 offs, size_t len, const void *buf)
+{
+	struct rpc_spi *rpc =
+			spi_controller_get_devdata(desc->mem->spi->controller);
+	int ret;
+
+	if (offs + desc->info.offset + len > U32_MAX)
+		return -EINVAL;
+
+	if (len > RPC_WBUF_SIZE)
+		len = RPC_WBUF_SIZE;
+
+	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
+
+	rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
+				    &desc->info.op_tmpl, &offs, &len);
+
+	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, RPC_CMNCR_MD);
+
+	regmap_write(rpc->regmap, RPC_SMDRENR, 0);
+
+	regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
+			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
+			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF);
+
+	memcpy_toio(rpc->wbuf, buf, len);
+
+	regmap_write(rpc->regmap, RPC_SMCMR, rpc->cmd);
+	regmap_write(rpc->regmap, RPC_SMADR, offs);
+	regmap_write(rpc->regmap, RPC_SMENR, rpc->smenr);
+	regmap_write(rpc->regmap, RPC_SMCR, rpc->smcr | RPC_SMCR_SPIE);
+	ret = wait_msg_xfer_end(rpc);
+	if (ret)
+		goto err_out;
+
+	regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RCF);
+
+	regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
+			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
+			   RPC_PHYCNT_STRTIM(6));
+
+	return len;
+
+err_out:
+	return reset_control_reset(rpc->rstc);
+}
+
+static int rpc_spi_mem_dirmap_create(struct spi_mem_dirmap_desc *desc)
+{
+	struct rpc_spi *rpc =
+			spi_controller_get_devdata(desc->mem->spi->controller);
+
+	if (desc->info.offset + desc->info.length > U32_MAX)
+		return -ENOTSUPP;
+
+	if (!rpc_spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
+		return -ENOTSUPP;
+
+	if (!rpc->dirmap &&
+	    desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN)
+		return -ENOTSUPP;
+
+	if (!rpc->wbuf &&
+	    desc->info.op_tmpl.data.dir == SPI_MEM_DATA_OUT)
+		return -ENOTSUPP;
+
+	return 0;
+}
+
+static int rpc_spi_mem_exec_op(struct spi_mem *mem,
+			       const struct spi_mem_op *op)
+{
+	struct rpc_spi *rpc = spi_controller_get_devdata(mem->spi->controller);
+	int ret;
+
+	ret = rpc_spi_set_freq(rpc, mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
+
+	rpc_spi_mem_set_prep_op_cfg(mem->spi, op, NULL, NULL);
+
+	ret = rpc_spi_io_xfer(rpc,
+			      op->data.dir == SPI_MEM_DATA_OUT ?
+			      op->data.buf.out : NULL,
+			      op->data.dir == SPI_MEM_DATA_IN ?
+			      op->data.buf.in : NULL);
+
+	return ret;
+}
+
+static const struct spi_controller_mem_ops rpc_spi_mem_ops = {
+	.supports_op = rpc_spi_mem_supports_op,
+	.exec_op = rpc_spi_mem_exec_op,
+	.dirmap_create = rpc_spi_mem_dirmap_create,
+	.dirmap_read = rpc_spi_mem_dirmap_read,
+	.dirmap_write = rpc_spi_mem_dirmap_write,
+};
+
+static void rpc_spi_transfer_setup(struct rpc_spi *rpc,
+				   struct spi_message *msg)
+{
+	struct spi_transfer *t, xfer[4] = { };
+	u32 i, xfercnt, xferpos = 0;
+
+	rpc->totalxferlen = 0;
+	rpc->xfer_dir = SPI_MEM_NO_DATA;
+
+	list_for_each_entry(t, &msg->transfers, transfer_list) {
+		if (t->tx_buf) {
+			xfer[xferpos].tx_buf = t->tx_buf;
+			xfer[xferpos].tx_nbits = t->tx_nbits;
+		}
+
+		if (t->rx_buf) {
+			xfer[xferpos].rx_buf = t->rx_buf;
+			xfer[xferpos].rx_nbits = t->rx_nbits;
+		}
+
+		if (t->len) {
+			xfer[xferpos++].len = t->len;
+			rpc->totalxferlen += t->len;
+		}
+
+		if (list_is_last(&t->transfer_list, &msg->transfers)) {
+			if (xferpos > 1) {
+				if (t->rx_buf) {
+					rpc->xfer_dir = SPI_MEM_DATA_IN;
+					rpc->smcr = RPC_SMCR_SPIRE;
+				} else if (t->tx_buf) {
+					rpc->xfer_dir = SPI_MEM_DATA_OUT;
+					rpc->smcr = RPC_SMCR_SPIWE;
+				}
+			}
+		}
+	}
+
+	xfercnt = xferpos;
+	rpc->xferlen = xfer[--xferpos].len;
+	rpc->cmd = RPC_SMCMR_CMD(((u8 *)xfer[0].tx_buf)[0]);
+	rpc->smenr = RPC_SMENR_CDE |
+		     RPC_SMENR_CDB(ilog2((unsigned int)xfer[0].tx_nbits));
+	rpc->addr = 0;
+
+	if (xfercnt > 2 && xfer[1].len && xfer[1].tx_buf) {
+		rpc->smenr |=
+			RPC_SMENR_ADB(ilog2((unsigned int)xfer[1].tx_nbits));
+
+		for (i = 0; i < xfer[1].len; i++)
+			rpc->addr |= ((u8 *)xfer[1].tx_buf)[i] <<
+				     (8 * (xfer[1].len - i - 1));
+
+		if (xfer[1].len == 4)
+			rpc->smenr |= RPC_SMENR_ADE(0xf);
+		else
+			rpc->smenr |= RPC_SMENR_ADE(0x7);
+	}
+
+	if (xfercnt > 3 && xfer[2].len && xfer[2].tx_buf) {
+		rpc->smenr |= RPC_SMENR_DME;
+		rpc->dummy = RPC_SMDMCR_DMCYC(xfer[2].len);
+	}
+
+	for (i = xfercnt - 1; i < xfercnt && xfercnt > 1; i++) {
+		if (xfer[i].rx_buf) {
+			rpc->smenr |=
+				RPC_SMENR_SPIDE(rpc_bits_set(xfer[i].len)) |
+				RPC_SMENR_SPIDB(ilog2
+					((unsigned int)xfer[i].rx_nbits));
+		} else if (xfer[i].tx_buf) {
+			rpc->smenr |=
+				RPC_SMENR_SPIDE(rpc_bits_set(xfer[i].len)) |
+				RPC_SMENR_SPIDB(ilog2
+					((unsigned int)xfer[i].tx_nbits));
+		}
+	}
+}
+
+static inline int rpc_spi_xfer_message(struct rpc_spi *rpc,
+				       struct spi_transfer *data_xfer)
+{
+	int ret;
+
+	ret = rpc_spi_set_freq(rpc, data_xfer->speed_hz);
+	if (ret)
+		return ret;
+
+	ret = rpc_spi_io_xfer(rpc,
+			      rpc->xfer_dir == SPI_MEM_DATA_OUT ?
+			      data_xfer->tx_buf : NULL,
+			      rpc->xfer_dir == SPI_MEM_DATA_IN ?
+			      data_xfer->rx_buf : NULL);
+
+	return ret;
+}
+
+static int rpc_spi_transfer_one_message(struct spi_controller *ctlr,
+					struct spi_message *msg)
+{
+	struct rpc_spi *rpc = spi_controller_get_devdata(ctlr);
+	struct spi_transfer *data_xfer;
+	int ret;
+
+	rpc_spi_transfer_setup(rpc, msg);
+
+	data_xfer = list_last_entry(&msg->transfers, struct spi_transfer,
+				    transfer_list);
+
+	ret = rpc_spi_xfer_message(rpc, data_xfer);
+	if (ret)
+		goto out;
+
+	msg->status = 0;
+	msg->actual_length = rpc->totalxferlen;
+out:
+	spi_finalize_current_message(ctlr);
+	return 0;
+}
+
+static int rpc_spi_probe(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr;
+	struct rpc_mfd *rpc_mfd = dev_get_drvdata(pdev->dev.parent);
+	struct rpc_spi *rpc;
+	int ret;
+
+	ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
+	if (!ctlr)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ctlr);
+
+	rpc = spi_controller_get_devdata(ctlr);
+
+	ctlr->dev.of_node = pdev->dev.of_node;
+
+	rpc->clk_rpc = rpc_mfd->clk_rpc;
+	if (IS_ERR(rpc->clk_rpc))
+		return PTR_ERR(rpc->clk_rpc);
+
+	rpc->base = rpc_mfd->base;
+	if (IS_ERR(rpc->base))
+		return PTR_ERR(rpc->base);
+
+	rpc->regmap = rpc_mfd->regmap;
+	if (IS_ERR(rpc->regmap)) {
+		dev_err(&pdev->dev,
+			"failed to regmap for rpc-spi, error %ld\n",
+			PTR_ERR(rpc->regmap));
+		return PTR_ERR(rpc->regmap);
+	}
+
+	rpc->dirmap = rpc_mfd->dirmap;
+	if (IS_ERR(rpc->dirmap))
+		rpc->dirmap = NULL;
+
+	rpc->wbuf = rpc_mfd->wbuf;
+	if (IS_ERR(rpc->wbuf))
+		rpc->wbuf = NULL;
+
+	rpc->rstc = rpc_mfd->rstc;
+	if (IS_ERR(rpc->rstc))
+		return PTR_ERR(rpc->rstc);
+
+	pm_runtime_enable(&pdev->dev);
+	ctlr->auto_runtime_pm = true;
+
+	ctlr->num_chipselect = 1;
+	ctlr->mem_ops = &rpc_spi_mem_ops;
+	ctlr->transfer_one_message = rpc_spi_transfer_one_message;
+
+	ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
+	ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_QUAD | SPI_RX_QUAD;
+
+	rpc_spi_hw_init(rpc);
+
+	ret = spi_register_controller(ctlr);
+	if (ret) {
+		dev_err(&pdev->dev, "spi_register_controller failed\n");
+		goto err_put_ctlr;
+	}
+	return 0;
+
+err_put_ctlr:
+	spi_controller_put(ctlr);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int rpc_spi_remove(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+	spi_unregister_controller(ctlr);
+
+	return 0;
+}
+
+static const struct of_device_id rpc_spi_of_ids[] = {
+	{ .compatible = "renesas,rcar-rpc-spi", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rpc_spi_of_ids);
+
+#ifdef CONFIG_PM_SLEEP
+static int rpc_spi_suspend(struct device *dev)
+{
+	struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+	return spi_controller_suspend(ctlr);
+}
+
+static int rpc_spi_resume(struct device *dev)
+{
+	struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+	return spi_controller_resume(ctlr);
+}
+
+static SIMPLE_DEV_PM_OPS(rpc_spi_pm_ops, rpc_spi_suspend, rpc_spi_resume);
+#define DEV_PM_OPS	(&rpc_spi_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver rpc_spi_driver = {
+	.probe = rpc_spi_probe,
+	.remove = rpc_spi_remove,
+	.driver = {
+		.name = "rpc-spi",
+		.of_match_table = rpc_spi_of_ids,
+		.pm = DEV_PM_OPS,
+	},
+};
+module_platform_driver(rpc_spi_driver);
+
+MODULE_AUTHOR("Mason Yang <masonccyang@mxic.com.tw>");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 RPC-IF SPI controller driver");
+MODULE_LICENSE("GPL v2");