[4.19.y,1/4] dt-bindings: PCI: rcar: Add device tree support for r8a774c0
diff mbox series

Message ID 1553848357-30592-2-git-send-email-fabrizio.castro@bp.renesas.com
State Accepted
Delegated to: Pavel Machek
Headers show
Series
  • Add PCIe support to EK874
Related show

Commit Message

Fabrizio Castro March 29, 2019, 8:32 a.m. UTC
Add PCIe support for the RZ/G2E (a.k.a. R8A774C0).

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 2e2b7615e310994b4d59c98b7d114449a9f019e5)
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 Documentation/devicetree/bindings/pci/rcar-pci.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Pavel Machek April 9, 2019, 8:55 p.m. UTC | #1
On Fri 2019-03-29 08:32:34, Fabrizio Castro wrote:
> Add PCIe support for the RZ/G2E (a.k.a. R8A774C0).
> 

This does not apply.

--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Fabrizio Castro April 10, 2019, 8:51 a.m. UTC | #2
Hello Pavel,

Thank you for your feedback.

> -----Original Message-----
> From: Pavel Machek <pavel@denx.de>
> Sent: 09 April 2019 21:56
> To: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Cc: cip-dev@lists.cip-project.org; Biju Das <biju.das@bp.renesas.com>
> Subject: Re: [cip-dev] [PATCH 4.19.y 1/4] dt-bindings: PCI: rcar: Add device tree support for r8a774c0
> 
> On Fri 2019-03-29 08:32:34, Fabrizio Castro wrote:
> > Add PCIe support for the RZ/G2E (a.k.a. R8A774C0).
> >
> 
> This does not apply.

This applies for me. Perhaps your are trying to apply this to a different branch?
I have just managed to apply this cleanly on top of linux-4.19.y-cip, I am told that specifying 4.19.y in the patch description should suffice in describing where the patch should go, perhaps you have a different understanding?

Thanks,
Fab

> 
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Pavel Machek April 12, 2019, 7:55 a.m. UTC | #3
On Fri 2019-03-29 08:32:34, Fabrizio Castro wrote:
> Add PCIe support for the RZ/G2E (a.k.a. R8A774C0).
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
> (cherry picked from commit 2e2b7615e310994b4d59c98b7d114449a9f019e5)
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Thanks, I applied the series.
								Pavel

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index a5f7fc6..fac07a4 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -2,6 +2,7 @@ 
 
 Required properties:
 compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
+	    "renesas,pcie-r8a774c0" for the R8A774C0 SoC;
 	    "renesas,pcie-r8a7779" for the R8A7779 SoC;
 	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
@@ -11,7 +12,8 @@  compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
 	    "renesas,pcie-r8a77980" for the R8A77980 SoC;
 	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or
 				     RZ/G1 compatible device.
-	    "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device.
+	    "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 or
+				     RZ/G2 compatible device.
 
 	    When compatible with the generic version, nodes must list the
 	    SoC-specific version corresponding to the platform first