[PULL,2/2] xen-block: scale sector based quantities correctly
diff mbox series

Message ID 20190404170722.4492-3-anthony.perard@citrix.com
State New, archived
Headers show
Series
  • [PULL,1/2] xen-block: only advertize discard to the frontend when it is enabled...
Related show

Commit Message

Anthony PERARD April 4, 2019, 5:07 p.m. UTC
From: Paul Durrant <paul.durrant@citrix.com>

The Xen blkif protocol requires that sector based quantities should be
interpreted strictly as multiples of 512 bytes. Specifically:

"first_sect and last_sect in blkif_request_segment, as well as
sector_number in blkif_request, are always expressed in 512-byte units."

Commit fcab2b464e06 "xen: add header and build dataplane/xen-block.c"
incorrectly modified behaviour to use the block device logical_block_size
property as the scale, instead of correctly shifting values by the
hardcoded BDRV_SECTOR_BITS (and hence scaling them to 512 byte units).
This patch undoes that change and restores compliance with the spec.

Furthermore, this patch also restores the original xen_disk behaviour
of advertizing a hardcoded 'sector-size' value of 512 in xenstore and
scaling 'sectors' accordingly. The realize() method is also modified to
fail if logical_block_size is set to anything other than 512.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190401121719.27208-1-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
---
 hw/block/dataplane/xen-block.c | 28 +++++++++++++---------------
 hw/block/xen-block.c           | 10 ++++++++--
 hw/block/xen_blkif.h           |  2 ++
 3 files changed, 23 insertions(+), 17 deletions(-)

Patch
diff mbox series

diff --git a/hw/block/dataplane/xen-block.c b/hw/block/dataplane/xen-block.c
index f1523c5b45..bb8f1186e4 100644
--- a/hw/block/dataplane/xen-block.c
+++ b/hw/block/dataplane/xen-block.c
@@ -49,7 +49,6 @@  struct XenBlockDataPlane {
     unsigned int *ring_ref;
     unsigned int nr_ring_ref;
     void *sring;
-    int64_t file_blk;
     int protocol;
     blkif_back_rings_t rings;
     int more_work;
@@ -168,7 +167,7 @@  static int xen_block_parse_request(XenBlockRequest *request)
         goto err;
     }
 
-    request->start = request->req.sector_number * dataplane->file_blk;
+    request->start = request->req.sector_number * XEN_BLKIF_SECTOR_SIZE;
     for (i = 0; i < request->req.nr_segments; i++) {
         if (i == BLKIF_MAX_SEGMENTS_PER_REQUEST) {
             error_report("error: nr_segments too big");
@@ -178,14 +177,14 @@  static int xen_block_parse_request(XenBlockRequest *request)
             error_report("error: first > last sector");
             goto err;
         }
-        if (request->req.seg[i].last_sect * dataplane->file_blk >=
+        if (request->req.seg[i].last_sect * XEN_BLKIF_SECTOR_SIZE >=
             XC_PAGE_SIZE) {
             error_report("error: page crossing");
             goto err;
         }
 
         len = (request->req.seg[i].last_sect -
-               request->req.seg[i].first_sect + 1) * dataplane->file_blk;
+               request->req.seg[i].first_sect + 1) * XEN_BLKIF_SECTOR_SIZE;
         request->size += len;
     }
     if (request->start + request->size > blk_getlength(dataplane->blk)) {
@@ -205,7 +204,6 @@  static int xen_block_copy_request(XenBlockRequest *request)
     XenDevice *xendev = dataplane->xendev;
     XenDeviceGrantCopySegment segs[BLKIF_MAX_SEGMENTS_PER_REQUEST];
     int i, count;
-    int64_t file_blk = dataplane->file_blk;
     bool to_domain = (request->req.operation == BLKIF_OP_READ);
     void *virt = request->buf;
     Error *local_err = NULL;
@@ -220,16 +218,17 @@  static int xen_block_copy_request(XenBlockRequest *request)
         if (to_domain) {
             segs[i].dest.foreign.ref = request->req.seg[i].gref;
             segs[i].dest.foreign.offset = request->req.seg[i].first_sect *
-                file_blk;
+                XEN_BLKIF_SECTOR_SIZE;
             segs[i].source.virt = virt;
         } else {
             segs[i].source.foreign.ref = request->req.seg[i].gref;
             segs[i].source.foreign.offset = request->req.seg[i].first_sect *
-                file_blk;
+                XEN_BLKIF_SECTOR_SIZE;
             segs[i].dest.virt = virt;
         }
         segs[i].len = (request->req.seg[i].last_sect -
-                       request->req.seg[i].first_sect + 1) * file_blk;
+                       request->req.seg[i].first_sect + 1) *
+                      XEN_BLKIF_SECTOR_SIZE;
         virt += segs[i].len;
     }
 
@@ -331,22 +330,22 @@  static bool xen_block_split_discard(XenBlockRequest *request,
     XenBlockDataPlane *dataplane = request->dataplane;
     int64_t byte_offset;
     int byte_chunk;
-    uint64_t byte_remaining, limit;
+    uint64_t byte_remaining;
     uint64_t sec_start = sector_number;
     uint64_t sec_count = nr_sectors;
 
     /* Wrap around, or overflowing byte limit? */
     if (sec_start + sec_count < sec_count ||
-        sec_start + sec_count > INT64_MAX / dataplane->file_blk) {
+        sec_start + sec_count > INT64_MAX / XEN_BLKIF_SECTOR_SIZE) {
         return false;
     }
 
-    limit = BDRV_REQUEST_MAX_SECTORS * dataplane->file_blk;
-    byte_offset = sec_start * dataplane->file_blk;
-    byte_remaining = sec_count * dataplane->file_blk;
+    byte_offset = sec_start * XEN_BLKIF_SECTOR_SIZE;
+    byte_remaining = sec_count * XEN_BLKIF_SECTOR_SIZE;
 
     do {
-        byte_chunk = byte_remaining > limit ? limit : byte_remaining;
+        byte_chunk = byte_remaining > BDRV_REQUEST_MAX_BYTES ?
+            BDRV_REQUEST_MAX_BYTES : byte_remaining;
         request->aio_inflight++;
         blk_aio_pdiscard(dataplane->blk, byte_offset, byte_chunk,
                          xen_block_complete_aio, request);
@@ -632,7 +631,6 @@  XenBlockDataPlane *xen_block_dataplane_create(XenDevice *xendev,
     XenBlockDataPlane *dataplane = g_new0(XenBlockDataPlane, 1);
 
     dataplane->xendev = xendev;
-    dataplane->file_blk = conf->logical_block_size;
     dataplane->blk = conf->blk;
 
     QLIST_INIT(&dataplane->inflight);
diff --git a/hw/block/xen-block.c b/hw/block/xen-block.c
index 475a67845d..ef635be4c2 100644
--- a/hw/block/xen-block.c
+++ b/hw/block/xen-block.c
@@ -149,7 +149,7 @@  static void xen_block_set_size(XenBlockDevice *blockdev)
     const char *type = object_get_typename(OBJECT(blockdev));
     XenBlockVdev *vdev = &blockdev->props.vdev;
     BlockConf *conf = &blockdev->props.conf;
-    int64_t sectors = blk_getlength(conf->blk) / conf->logical_block_size;
+    int64_t sectors = blk_getlength(conf->blk) / XEN_BLKIF_SECTOR_SIZE;
     XenDevice *xendev = XEN_DEVICE(blockdev);
 
     trace_xen_block_size(type, vdev->disk, vdev->partition, sectors);
@@ -223,6 +223,12 @@  static void xen_block_realize(XenDevice *xendev, Error **errp)
 
     blkconf_blocksizes(conf);
 
+    if (conf->logical_block_size != XEN_BLKIF_SECTOR_SIZE) {
+        error_setg(errp, "logical_block_size != %u not supported",
+                   XEN_BLKIF_SECTOR_SIZE);
+        return;
+    }
+
     if (conf->logical_block_size > conf->physical_block_size) {
         error_setg(
             errp, "logical_block_size > physical_block_size not supported");
@@ -253,7 +259,7 @@  static void xen_block_realize(XenDevice *xendev, Error **errp)
                                blockdev->device_type);
 
     xen_device_backend_printf(xendev, "sector-size", "%u",
-                              conf->logical_block_size);
+                              XEN_BLKIF_SECTOR_SIZE);
 
     xen_block_set_size(blockdev);
 
diff --git a/hw/block/xen_blkif.h b/hw/block/xen_blkif.h
index 3e6e1ea365..a353693ea0 100644
--- a/hw/block/xen_blkif.h
+++ b/hw/block/xen_blkif.h
@@ -143,4 +143,6 @@  static inline void blkif_get_x86_64_req(blkif_request_t *dst,
     }
 }
 
+#define XEN_BLKIF_SECTOR_SIZE 512
+
 #endif /* XEN_BLKIF_H */