@@ -35,6 +35,25 @@
#define ISC_PFG_CFG0_BPS_TWELVE (0x0 << 28)
#define ISC_PFE_CFG0_BPS_MASK GENMASK(30, 28)
+#define ISC_PFE_CFG0_COLEN BIT(12)
+#define ISC_PFE_CFG0_ROWEN BIT(13)
+
+/* ISC Parallel Front End Configuration 1 Register */
+#define ISC_PFE_CFG1 0x00000010
+
+#define ISC_PFE_CFG1_COLMIN(v) ((v))
+#define ISC_PFE_CFG1_COLMIN_MASK GENMASK(15, 0)
+#define ISC_PFE_CFG1_COLMAX(v) ((v) << 16)
+#define ISC_PFE_CFG1_COLMAX_MASK GENMASK(31, 16)
+
+/* ISC Parallel Front End Configuration 2 Register */
+#define ISC_PFE_CFG2 0x00000014
+
+#define ISC_PFE_CFG2_ROWMIN(v) ((v))
+#define ISC_PFE_CFG2_ROWMIN_MASK GENMASK(15, 0)
+#define ISC_PFE_CFG2_ROWMAX(v) ((v) << 16)
+#define ISC_PFE_CFG2_ROWMAX_MASK GENMASK(31, 16)
+
/* ISC Clock Enable Register */
#define ISC_CLKEN 0x00000018
@@ -764,12 +764,46 @@ static void isc_start_dma(struct isc_device *isc)
u32 sizeimage = isc->fmt.fmt.pix.sizeimage;
u32 dctrl_dview;
dma_addr_t addr0;
+ u32 h, w;
if (!isc->cur_frm) {
v4l2_err(&isc->v4l2_dev, "Video buffer not available\n");
return;
}
+ h = isc->fmt.fmt.pix.height;
+ w = isc->fmt.fmt.pix.width;
+
+ /*
+ * In case the sensor is not RAW, it will output a pixel (12-16 bits)
+ * with two samples on the ISC Data bus (which is 8-12)
+ * ISC will count each sample, so, we need to multiply these values
+ * by two, to get the real number of samples for the required pixels.
+ */
+ if (!ISC_IS_FORMAT_RAW(isc->config.sd_format->mbus_code)) {
+ h <<= 1;
+ w <<= 1;
+ }
+
+ /*
+ * We limit the column/row count that the ISC will output according
+ * to the configured resolution that we want.
+ * This will avoid the situation where the sensor is misconfigured,
+ * sending more data, and the ISC will just take it and DMA to memory,
+ * causing corruption.
+ */
+ regmap_write(regmap, ISC_PFE_CFG1,
+ (ISC_PFE_CFG1_COLMIN(0) & ISC_PFE_CFG1_COLMIN_MASK) |
+ (ISC_PFE_CFG1_COLMAX(w - 1) & ISC_PFE_CFG1_COLMAX_MASK));
+
+ regmap_write(regmap, ISC_PFE_CFG2,
+ (ISC_PFE_CFG2_ROWMIN(0) & ISC_PFE_CFG2_ROWMIN_MASK) |
+ (ISC_PFE_CFG2_ROWMAX(h - 1) & ISC_PFE_CFG2_ROWMAX_MASK));
+
+ regmap_update_bits(regmap, ISC_PFE_CFG0,
+ ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN,
+ ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN);
+
addr0 = vb2_dma_contig_plane_dma_addr(&isc->cur_frm->vb.vb2_buf, 0);
regmap_write(regmap, ISC_DAD0, addr0);