diff mbox series

[v3] rcar-csi2: Move setting of Field Detection Control Register

Message ID 20190410142715.11369-1-niklas.soderlund+renesas@ragnatech.se (mailing list archive)
State Accepted
Delegated to: Kieran Bingham
Headers show
Series [v3] rcar-csi2: Move setting of Field Detection Control Register | expand

Commit Message

Niklas Söderlund April 10, 2019, 2:27 p.m. UTC 
Later datasheet versions (rev 1.00) clarifies that the FLD register
should be set after LINKCNT.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-csi2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 73c51e9d4a1adcba..799e526fd3df5554 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -519,8 +519,6 @@  static int rcsi2_start_receiver(struct rcar_csi2 *priv)
 	rcsi2_write(priv, PHTC_REG, 0);
 
 	/* Configure */
-	rcsi2_write(priv, FLD_REG, FLD_FLD_NUM(2) | FLD_FLD_EN4 |
-		    FLD_FLD_EN3 | FLD_FLD_EN2 | FLD_FLD_EN);
 	rcsi2_write(priv, VCDT_REG, vcdt);
 	if (vcdt2)
 		rcsi2_write(priv, VCDT2_REG, vcdt2);
@@ -551,6 +549,8 @@  static int rcsi2_start_receiver(struct rcar_csi2 *priv)
 	rcsi2_write(priv, PHYCNT_REG, phycnt);
 	rcsi2_write(priv, LINKCNT_REG, LINKCNT_MONITOR_EN |
 		    LINKCNT_REG_MONI_PACT_EN | LINKCNT_ICLK_NONSTOP);
+	rcsi2_write(priv, FLD_REG, FLD_FLD_NUM(2) | FLD_FLD_EN4 |
+		    FLD_FLD_EN3 | FLD_FLD_EN2 | FLD_FLD_EN);
 	rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ);
 	rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ);