@@ -31,7 +31,7 @@
#include <asm/mach/map.h>
#include "regs-sys.h"
-#include <mach/regs-misc.h>
+#include "regs-misc.h"
static struct map_desc ks8695_io_desc[] __initdata = {
@@ -27,9 +27,8 @@
#include "regs-wan.h"
#include "regs-lan.h"
#include "regs-hpna.h"
-#include <mach/regs-switch.h>
-#include <mach/regs-misc.h>
-
+#include "regs-switch.h"
+#include "regs-misc.h"
/* --------------------------------------------------------------------
* Ethernet
deleted file mode 100644
@@ -1,97 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-misc.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Miscellaneous Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_MISC_H
-#define KS8695_MISC_H
-
-#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00)
-#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET)
-#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET)
-
-
-/*
- * Miscellaneous registers
- */
-#define KS8695_DID (0x00) /* Device ID */
-#define KS8695_RID (0x04) /* Revision ID */
-#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */
-#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */
-#define KS8695_WPPM (0x10) /* WAN PHY Power Management */
-#define KS8695_PPS (0x1c) /* PHY PowerSave */
-
-/* Device ID Register */
-#define DID_ID (0xffff << 0) /* Device ID */
-
-/* Revision ID Register */
-#define RID_SUBID (0xf << 4) /* Sub-Device ID */
-#define RID_REVISION (0xf << 0) /* Revision ID */
-
-/* HPNA Miscellaneous Control Register */
-#define HMC_HSS (1 << 1) /* Speed */
-#define HMC_HDS (1 << 0) /* Duplex */
-
-/* WAN Miscellaneous Control Register */
-#define WMC_WANC (1 << 30) /* Auto-negotiation complete */
-#define WMC_WANR (1 << 29) /* Auto-negotiation restart */
-#define WMC_WANAP (1 << 28) /* Advertise Pause */
-#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */
-#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */
-#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */
-#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */
-#define WMC_WLS (1 << 23) /* Link status */
-#define WMC_WDS (1 << 22) /* Duplex status */
-#define WMC_WSS (1 << 21) /* Speed status */
-#define WMC_WLPP (1 << 20) /* Link Partner Pause */
-#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */
-#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */
-#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */
-#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */
-#define WMC_WAND (1 << 15) /* Auto-negotiation disable */
-#define WMC_WANF100 (1 << 14) /* Force 100 */
-#define WMC_WANFF (1 << 13) /* Force FDX */
-#define WMC_WLED1S (7 << 4) /* LED1 Select */
-#define WLED1S_SPEED (0 << 4)
-#define WLED1S_LINK (1 << 4)
-#define WLED1S_DUPLEX (2 << 4)
-#define WLED1S_COLLISION (3 << 4)
-#define WLED1S_ACTIVITY (4 << 4)
-#define WLED1S_FDX_COLLISION (5 << 4)
-#define WLED1S_LINK_ACTIVITY (6 << 4)
-#define WMC_WLED0S (7 << 0) /* LED0 Select */
-#define WLED0S_SPEED (0 << 0)
-#define WLED0S_LINK (1 << 0)
-#define WLED0S_DUPLEX (2 << 0)
-#define WLED0S_COLLISION (3 << 0)
-#define WLED0S_ACTIVITY (4 << 0)
-#define WLED0S_FDX_COLLISION (5 << 0)
-#define WLED0S_LINK_ACTIVITY (6 << 0)
-
-/* WAN PHY Power Management Register */
-#define WPPM_WLPBK (1 << 14) /* Local Loopback */
-#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */
-#define WPPM_WPI (1 << 12) /* PHY isolate */
-#define WPPM_WFL (1 << 10) /* Force link */
-#define WPPM_MDIXS (1 << 9) /* MDIX Status */
-#define WPPM_FEF (1 << 8) /* Far End Fault */
-#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */
-#define WPPM_TXDIS (1 << 6) /* Disable transmitter */
-#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */
-#define WPPM_PD (1 << 4) /* Power Down */
-#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */
-#define WPPM_FMDX (1 << 2) /* Force MDIX */
-#define WPPM_LPBK (1 << 1) /* MAX Loopback */
-
-/* PHY Power Save Register */
-#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */
-
-
-#endif
deleted file mode 100644
@@ -1,66 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-switch.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Switch Registers and bit definitions.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_SWITCH_H
-#define KS8695_SWITCH_H
-
-#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800)
-#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET)
-#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET)
-
-
-/*
- * Switch registers
- */
-#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */
-#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */
-#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */
-
-#define KS8695_SEPXCZ(x,z) (0x0c + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */
-
-#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */
-#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */
-#define KS8695_SEIAC (0x50) /* Indirect Access Control */
-#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */
-#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */
-#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */
-#define KS8695_SEAFC (0x60) /* Advance Feature Control */
-#define KS8695_SEDSCPH (0x64) /* TOS Priority High */
-#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */
-#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */
-#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */
-#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */
-#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */
-
-
-/* Switch Engine Control 0 */
-#define SEC0_LLED1S (7 << 25) /* LED1 Select */
-#define LLED1S_SPEED (0 << 25)
-#define LLED1S_LINK (1 << 25)
-#define LLED1S_DUPLEX (2 << 25)
-#define LLED1S_COLLISION (3 << 25)
-#define LLED1S_ACTIVITY (4 << 25)
-#define LLED1S_FDX_COLLISION (5 << 25)
-#define LLED1S_LINK_ACTIVITY (6 << 25)
-#define SEC0_LLED0S (7 << 22) /* LED0 Select */
-#define LLED0S_SPEED (0 << 22)
-#define LLED0S_LINK (1 << 22)
-#define LLED0S_DUPLEX (2 << 22)
-#define LLED0S_COLLISION (3 << 22)
-#define LLED0S_ACTIVITY (4 << 22)
-#define LLED0S_FDX_COLLISION (5 << 22)
-#define LLED0S_LINK_ACTIVITY (6 << 22)
-#define SEC0_ENABLE (1 << 0) /* Enable Switch */
-
-
-
-#endif
new file mode 100644
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-misc.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Miscellaneous Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MISC_H
+#define KS8695_MISC_H
+
+#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00)
+#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET)
+#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET)
+
+/*
+ * Miscellaneous registers
+ */
+#define KS8695_DID (0x00) /* Device ID */
+#define KS8695_RID (0x04) /* Revision ID */
+
+/* Device ID Register */
+#define DID_ID (0xffff << 0) /* Device ID */
+
+/* Revision ID Register */
+#define RID_SUBID (0xf << 4) /* Sub-Device ID */
+#define RID_REVISION (0xf << 0) /* Revision ID */
+
+#endif
new file mode 100644
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Switch Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SWITCH_H
+#define KS8695_SWITCH_H
+
+#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800)
+#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET)
+#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET)
+
+#endif
@@ -19,7 +19,7 @@ if NET_VENDOR_MICREL
config ARM_KS8695_ETHER
tristate "KS8695 Ethernet support"
- depends on ARM && ARCH_KS8695
+ depends on (ARM && ARCH_KS8695) || COMPILE_TEST
select MII
---help---
If you wish to compile a kernel for the KS8695 and want to
@@ -33,18 +33,120 @@
#include <linux/io.h>
#include <linux/slab.h>
-#include <asm/irq.h>
-
-#include <mach/regs-switch.h>
-#include <mach/regs-misc.h>
-#include <asm/mach/irq.h>
-#include <mach/regs-irq.h>
-
#include "ks8695net.h"
#define MODULENAME "ks8695_ether"
#define MODULEVERSION "1.02"
+#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */
+#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */
+#define KS8695_WPPM (0x10) /* WAN PHY Power Management */
+#define KS8695_PPS (0x1c) /* PHY PowerSave */
+
+
+/* WAN Miscellaneous Control Register */
+#define WMC_WANC (1 << 30) /* Auto-negotiation complete */
+#define WMC_WANR (1 << 29) /* Auto-negotiation restart */
+#define WMC_WANAP (1 << 28) /* Advertise Pause */
+#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */
+#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */
+#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */
+#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */
+#define WMC_WLS (1 << 23) /* Link status */
+#define WMC_WDS (1 << 22) /* Duplex status */
+#define WMC_WSS (1 << 21) /* Speed status */
+#define WMC_WLPP (1 << 20) /* Link Partner Pause */
+#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */
+#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */
+#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */
+#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */
+#define WMC_WAND (1 << 15) /* Auto-negotiation disable */
+#define WMC_WANF100 (1 << 14) /* Force 100 */
+#define WMC_WANFF (1 << 13) /* Force FDX */
+#define WMC_WLED1S (7 << 4) /* LED1 Select */
+#define WLED1S_SPEED (0 << 4)
+#define WLED1S_LINK (1 << 4)
+#define WLED1S_DUPLEX (2 << 4)
+#define WLED1S_COLLISION (3 << 4)
+#define WLED1S_ACTIVITY (4 << 4)
+#define WLED1S_FDX_COLLISION (5 << 4)
+#define WLED1S_LINK_ACTIVITY (6 << 4)
+#define WMC_WLED0S (7 << 0) /* LED0 Select */
+#define WLED0S_SPEED (0 << 0)
+#define WLED0S_LINK (1 << 0)
+#define WLED0S_DUPLEX (2 << 0)
+#define WLED0S_COLLISION (3 << 0)
+#define WLED0S_ACTIVITY (4 << 0)
+#define WLED0S_FDX_COLLISION (5 << 0)
+#define WLED0S_LINK_ACTIVITY (6 << 0)
+
+/*
+ * Switch registers
+ */
+#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */
+#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */
+#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */
+
+#define KS8695_SEPXCZ(x,z) (0x0c + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */
+
+#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */
+#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */
+#define KS8695_SEIAC (0x50) /* Indirect Access Control */
+#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */
+#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */
+#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */
+#define KS8695_SEAFC (0x60) /* Advance Feature Control */
+#define KS8695_SEDSCPH (0x64) /* TOS Priority High */
+#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */
+#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */
+#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */
+#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */
+#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */
+
+
+/* Switch Engine Control 0 */
+#define SEC0_LLED1S (7 << 25) /* LED1 Select */
+#define LLED1S_SPEED (0 << 25)
+#define LLED1S_LINK (1 << 25)
+#define LLED1S_DUPLEX (2 << 25)
+#define LLED1S_COLLISION (3 << 25)
+#define LLED1S_ACTIVITY (4 << 25)
+#define LLED1S_FDX_COLLISION (5 << 25)
+#define LLED1S_LINK_ACTIVITY (6 << 25)
+#define SEC0_LLED0S (7 << 22) /* LED0 Select */
+#define LLED0S_SPEED (0 << 22)
+#define LLED0S_LINK (1 << 22)
+#define LLED0S_DUPLEX (2 << 22)
+#define LLED0S_COLLISION (3 << 22)
+#define LLED0S_ACTIVITY (4 << 22)
+#define LLED0S_FDX_COLLISION (5 << 22)
+#define LLED0S_LINK_ACTIVITY (6 << 22)
+#define SEC0_ENABLE (1 << 0) /* Enable Switch */
+
+
+/* HPNA Miscellaneous Control Register */
+#define HMC_HSS (1 << 1) /* Speed */
+#define HMC_HDS (1 << 0) /* Duplex */
+
+/* WAN PHY Power Management Register */
+#define WPPM_WLPBK (1 << 14) /* Local Loopback */
+#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */
+#define WPPM_WPI (1 << 12) /* PHY isolate */
+#define WPPM_WFL (1 << 10) /* Force link */
+#define WPPM_MDIXS (1 << 9) /* MDIX Status */
+#define WPPM_FEF (1 << 8) /* Far End Fault */
+#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */
+#define WPPM_TXDIS (1 << 6) /* Disable transmitter */
+#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */
+#define WPPM_PD (1 << 4) /* Power Down */
+#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */
+#define WPPM_FMDX (1 << 2) /* Force MDIX */
+#define WPPM_LPBK (1 << 1) /* MAX Loopback */
+
+/* PHY Power Save Register */
+#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */
+
+
/*
* Transmit and device reset timeout, default 5 seconds.
*/
Parts of the headers are only used by the ethernet driver, other parts are only used in the machine definitions. Move everything to the appropriate place that lets us kill off the global headers and allow build testing on other architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/mach-ks8695/cpu.c | 2 +- arch/arm/mach-ks8695/devices.c | 5 +- arch/arm/mach-ks8695/include/mach/regs-misc.h | 97 --------------- .../mach-ks8695/include/mach/regs-switch.h | 66 ---------- arch/arm/mach-ks8695/regs-misc.h | 33 +++++ arch/arm/mach-ks8695/regs-switch.h | 18 +++ drivers/net/ethernet/micrel/Kconfig | 2 +- drivers/net/ethernet/micrel/ks8695net.c | 116 ++++++++++++++++-- 8 files changed, 164 insertions(+), 175 deletions(-) delete mode 100644 arch/arm/mach-ks8695/include/mach/regs-misc.h delete mode 100644 arch/arm/mach-ks8695/include/mach/regs-switch.h create mode 100644 arch/arm/mach-ks8695/regs-misc.h create mode 100644 arch/arm/mach-ks8695/regs-switch.h