diff mbox series

[v2,3/5] Documentation: dt-bindings: Add snps, need-phy-for-wake for dwc2 USB

Message ID 20190418001356.124334-4-dianders@chromium.org (mailing list archive)
State New, archived
Headers show
Series USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron | expand

Commit Message

Doug Anderson April 18, 2019, 12:13 a.m. UTC
Some SoCs with a dwc2 USB controller may need to keep the PHY on to
support remote wakeup.  Allow specifying this as a device tree
property.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
For relevant prior discussion on this patch, see:

https://lkml.kernel.org/r/1435017144-2971-3-git-send-email-dianders@chromium.org

I didn't make any changes from the prior version since I never found
out what Rob thought of my previous arguments.  If folks want a
change, perhaps they could choose from these options:

1. Assume that all dwc2 hosts would like to keep their PHY on for
   suspend if there's a USB wakeup enabled, thus we totally drop this
   binding.  This doesn't seem super great to me since I'd bet that
   many devices that use dwc2 weren't designed for USB wakeup (they
   may not keep enough clocks or rails on) so we might be wasting
   power for nothing.
2. Rename this property to "snps,wakeup-from-suspend-with-phy" to make
   it more obvious that this property is intended both to document
   that wakeup from suspend is possible and that we need the PHY for
   said wakeup.
3. Rename this property to "snps,can-wakeup-from-suspend" and assume
   it's implicit that if we can wakeup from suspend that we need to
   keep the PHY on.  If/when someone shows that a device exists using
   dwc2 where we can wakeup from suspend without the PHY they can add
   a new property.

Changes in v2: None

 Documentation/devicetree/bindings/usb/dwc2.txt | 3 +++
 1 file changed, 3 insertions(+)

Comments

Felipe Balbi April 25, 2019, 12:40 p.m. UTC | #1
Douglas Anderson <dianders@chromium.org> writes:

> Some SoCs with a dwc2 USB controller may need to keep the PHY on to
> support remote wakeup.  Allow specifying this as a device tree
> property.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
> For relevant prior discussion on this patch, see:
>
> https://lkml.kernel.org/r/1435017144-2971-3-git-send-email-dianders@chromium.org
>
> I didn't make any changes from the prior version since I never found
> out what Rob thought of my previous arguments.  If folks want a
> change, perhaps they could choose from these options:
>
> 1. Assume that all dwc2 hosts would like to keep their PHY on for
>    suspend if there's a USB wakeup enabled, thus we totally drop this
>    binding.  This doesn't seem super great to me since I'd bet that
>    many devices that use dwc2 weren't designed for USB wakeup (they
>    may not keep enough clocks or rails on) so we might be wasting
>    power for nothing.
> 2. Rename this property to "snps,wakeup-from-suspend-with-phy" to make
>    it more obvious that this property is intended both to document
>    that wakeup from suspend is possible and that we need the PHY for
>    said wakeup.
> 3. Rename this property to "snps,can-wakeup-from-suspend" and assume
>    it's implicit that if we can wakeup from suspend that we need to
>    keep the PHY on.  If/when someone shows that a device exists using
>    dwc2 where we can wakeup from suspend without the PHY they can add
>    a new property.
>
> Changes in v2: None
>
>  Documentation/devicetree/bindings/usb/dwc2.txt | 3 +++
>  1 file changed, 3 insertions(+)

checking file Documentation/devicetree/bindings/usb/dwc2.txt
Hunk #1 FAILED at 37.
Hunk #2 succeeded at 52 (offset -1 lines).
1 out of 2 hunks FAILED
Doug Anderson April 25, 2019, 6:09 p.m. UTC | #2
Hi,

On Thu, Apr 25, 2019 at 5:40 AM Felipe Balbi
<felipe.balbi@linux.intel.com> wrote:
>
> Douglas Anderson <dianders@chromium.org> writes:
>
> > Some SoCs with a dwc2 USB controller may need to keep the PHY on to
> > support remote wakeup.  Allow specifying this as a device tree
> > property.
> >
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > ---
> > For relevant prior discussion on this patch, see:
> >
> > https://lkml.kernel.org/r/1435017144-2971-3-git-send-email-dianders@chromium.org
> >
> > I didn't make any changes from the prior version since I never found
> > out what Rob thought of my previous arguments.  If folks want a
> > change, perhaps they could choose from these options:
> >
> > 1. Assume that all dwc2 hosts would like to keep their PHY on for
> >    suspend if there's a USB wakeup enabled, thus we totally drop this
> >    binding.  This doesn't seem super great to me since I'd bet that
> >    many devices that use dwc2 weren't designed for USB wakeup (they
> >    may not keep enough clocks or rails on) so we might be wasting
> >    power for nothing.
> > 2. Rename this property to "snps,wakeup-from-suspend-with-phy" to make
> >    it more obvious that this property is intended both to document
> >    that wakeup from suspend is possible and that we need the PHY for
> >    said wakeup.
> > 3. Rename this property to "snps,can-wakeup-from-suspend" and assume
> >    it's implicit that if we can wakeup from suspend that we need to
> >    keep the PHY on.  If/when someone shows that a device exists using
> >    dwc2 where we can wakeup from suspend without the PHY they can add
> >    a new property.
> >
> > Changes in v2: None
> >
> >  Documentation/devicetree/bindings/usb/dwc2.txt | 3 +++
> >  1 file changed, 3 insertions(+)
>
> checking file Documentation/devicetree/bindings/usb/dwc2.txt
> Hunk #1 FAILED at 37.
> Hunk #2 succeeded at 52 (offset -1 lines).
> 1 out of 2 hunks FAILED

Yeah, as Minas pointed out in the cover letter [1] my series conflicts
with Artur's.  I have it on my list to try out his series and see if,
perhaps, it allows me to enable the partial power down and also just
generally rebase.  It's fairly high on my list to do that--hopefully
in the next week.

[1] https://lkml.kernel.org/r/e4b3cd69-1c91-dfbe-bea7-bbca89ca1348@synopsys.com

-Doug
Doug Anderson April 25, 2019, 7:58 p.m. UTC | #3
Hi,

On Thu, Apr 25, 2019 at 11:09 AM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Thu, Apr 25, 2019 at 5:40 AM Felipe Balbi
> <felipe.balbi@linux.intel.com> wrote:
> >
> > Douglas Anderson <dianders@chromium.org> writes:
> >
> > > Some SoCs with a dwc2 USB controller may need to keep the PHY on to
> > > support remote wakeup.  Allow specifying this as a device tree
> > > property.
> > >
> > > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > > ---
> > > For relevant prior discussion on this patch, see:
> > >
> > > https://lkml.kernel.org/r/1435017144-2971-3-git-send-email-dianders@chromium.org
> > >
> > > I didn't make any changes from the prior version since I never found
> > > out what Rob thought of my previous arguments.  If folks want a
> > > change, perhaps they could choose from these options:
> > >
> > > 1. Assume that all dwc2 hosts would like to keep their PHY on for
> > >    suspend if there's a USB wakeup enabled, thus we totally drop this
> > >    binding.  This doesn't seem super great to me since I'd bet that
> > >    many devices that use dwc2 weren't designed for USB wakeup (they
> > >    may not keep enough clocks or rails on) so we might be wasting
> > >    power for nothing.
> > > 2. Rename this property to "snps,wakeup-from-suspend-with-phy" to make
> > >    it more obvious that this property is intended both to document
> > >    that wakeup from suspend is possible and that we need the PHY for
> > >    said wakeup.
> > > 3. Rename this property to "snps,can-wakeup-from-suspend" and assume
> > >    it's implicit that if we can wakeup from suspend that we need to
> > >    keep the PHY on.  If/when someone shows that a device exists using
> > >    dwc2 where we can wakeup from suspend without the PHY they can add
> > >    a new property.
> > >
> > > Changes in v2: None
> > >
> > >  Documentation/devicetree/bindings/usb/dwc2.txt | 3 +++
> > >  1 file changed, 3 insertions(+)
> >
> > checking file Documentation/devicetree/bindings/usb/dwc2.txt
> > Hunk #1 FAILED at 37.
> > Hunk #2 succeeded at 52 (offset -1 lines).
> > 1 out of 2 hunks FAILED
>
> Yeah, as Minas pointed out in the cover letter [1] my series conflicts
> with Artur's.  I have it on my list to try out his series and see if,
> perhaps, it allows me to enable the partial power down and also just
> generally rebase.  It's fairly high on my list to do that--hopefully
> in the next week.
>
> [1] https://lkml.kernel.org/r/e4b3cd69-1c91-dfbe-bea7-bbca89ca1348@synopsys.com

Oh, it looks like you didn't apply Artur's patches, though.
Presumably you applied mine first and they won the race and thus I
guess it's up to Artur to rebase his patches atop mine.  This probably
explains why you told him the patches didn't apply.  I'll reply to
that thread.

...so it turns out that when I try now my patches apply fine [2].  I'm
guessing that you perhaps tried to apply these patches before my
"rk3288's remote wake quirk" which would indeed cause conflicts.  I
mentioned the dependency in my cover letter [1] but totally understand
that it's easy to miss stuff like that.  :-)

I'm going to assume you can just go-ahead and try applying patches 3,
4, and 5 in this series again.  If you want me to repost them then
please let me know.

Thanks, and sorry for the hassle.

[1] https://lkml.kernel.org/r/20190418001356.124334-1-dianders@chromium.org

[2] Showing that patches currently apply:

dianders@tictac2:v4.19 ((2e3cfcbbb140...))$ git checkout
linux_usb_balbi/testing/next
HEAD is now at 2e3cfcbbb140 dwc2: gadget: Fix completed transfer size
calculation in DDMA

dianders@tictac2:v4.19 ((2e3cfcbbb140...))$ curl -L
https://lore.kernel.org/patchwork/patch/1063477/mbox | git am
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  7273  100  7273    0     0  35827      0 --:--:-- --:--:-- --:--:-- 35827
Applying: Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USB

dianders@tictac2:v4.19 ((84c34d7b9647...))$ curl -L
https://lore.kernel.org/patchwork/patch/1063478/mbox | git am
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  9587  100  9587    0     0  46538      0 --:--:-- --:--:-- --:--:-- 46538
Applying: USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled

dianders@tictac2:v4.19 ((ff5ab1cb16ab...))$ curl -L
https://lore.kernel.org/patchwork/patch/1063479/mbox | git am
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  6045  100  6045    0     0  29778      0 --:--:-- --:--:-- --:--:-- 29778
Applying: ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports

-Doug
Rob Herring (Arm) April 30, 2019, 1:23 a.m. UTC | #4
On Wed, Apr 17, 2019 at 05:13:54PM -0700, Douglas Anderson wrote:
> Some SoCs with a dwc2 USB controller may need to keep the PHY on to
> support remote wakeup.  Allow specifying this as a device tree
> property.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
> For relevant prior discussion on this patch, see:
> 
> https://lkml.kernel.org/r/1435017144-2971-3-git-send-email-dianders@chromium.org
> 
> I didn't make any changes from the prior version since I never found
> out what Rob thought of my previous arguments.  If folks want a
> change, perhaps they could choose from these options:
> 
> 1. Assume that all dwc2 hosts would like to keep their PHY on for
>    suspend if there's a USB wakeup enabled, thus we totally drop this
>    binding.  This doesn't seem super great to me since I'd bet that
>    many devices that use dwc2 weren't designed for USB wakeup (they
>    may not keep enough clocks or rails on) so we might be wasting
>    power for nothing.

1b. Use SoC specific compatible strings to enable/disable remote 
wake-up. We can debate what the default is I guess.

> 2. Rename this property to "snps,wakeup-from-suspend-with-phy" to make
>    it more obvious that this property is intended both to document
>    that wakeup from suspend is possible and that we need the PHY for
>    said wakeup.
> 3. Rename this property to "snps,can-wakeup-from-suspend" and assume
>    it's implicit that if we can wakeup from suspend that we need to
>    keep the PHY on.  If/when someone shows that a device exists using
>    dwc2 where we can wakeup from suspend without the PHY they can add
>    a new property.
> 
> Changes in v2: None
> 
>  Documentation/devicetree/bindings/usb/dwc2.txt | 3 +++
>  1 file changed, 3 insertions(+)
>
Doug Anderson April 30, 2019, 5:25 a.m. UTC | #5
Hi,

On Mon, Apr 29, 2019 at 6:23 PM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Apr 17, 2019 at 05:13:54PM -0700, Douglas Anderson wrote:
> > Some SoCs with a dwc2 USB controller may need to keep the PHY on to
> > support remote wakeup.  Allow specifying this as a device tree
> > property.
> >
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > ---
> > For relevant prior discussion on this patch, see:
> >
> > https://lkml.kernel.org/r/1435017144-2971-3-git-send-email-dianders@chromium.org
> >
> > I didn't make any changes from the prior version since I never found
> > out what Rob thought of my previous arguments.  If folks want a
> > change, perhaps they could choose from these options:
> >
> > 1. Assume that all dwc2 hosts would like to keep their PHY on for
> >    suspend if there's a USB wakeup enabled, thus we totally drop this
> >    binding.  This doesn't seem super great to me since I'd bet that
> >    many devices that use dwc2 weren't designed for USB wakeup (they
> >    may not keep enough clocks or rails on) so we might be wasting
> >    power for nothing.
>
> 1b. Use SoC specific compatible strings to enable/disable remote
> wake-up. We can debate what the default is I guess.

Unfortunately it's more than just SoC.  While you need the SoC to be
able to support this type of wakeup, you also need the board design,
firmware design, regulator design, etc.  ...so I don't think we can
just use the SoC specific compatible string.

In fact, while testing this I found that USB wakeup was totally broken
unless I enabled "deep suspend" mode on my system.  Something about
the clocks / wakeup sources in the shallow suspend totally blocked it
and I couldn't figure out what.

...so I believe it really needs to be something where someone has
said: I tested it out on this board and everything is setup properly
to support USB wakeup.


> > 2. Rename this property to "snps,wakeup-from-suspend-with-phy" to make
> >    it more obvious that this property is intended both to document
> >    that wakeup from suspend is possible and that we need the PHY for
> >    said wakeup.
> > 3. Rename this property to "snps,can-wakeup-from-suspend" and assume
> >    it's implicit that if we can wakeup from suspend that we need to
> >    keep the PHY on.  If/when someone shows that a device exists using
> >    dwc2 where we can wakeup from suspend without the PHY they can add
> >    a new property.
> >
> > Changes in v2: None
> >
> >  Documentation/devicetree/bindings/usb/dwc2.txt | 3 +++
> >  1 file changed, 3 insertions(+)
Doug Anderson May 2, 2019, 6:36 p.m. UTC | #6
Hi,

On Thu, Apr 25, 2019 at 5:40 AM Felipe Balbi
<felipe.balbi@linux.intel.com> wrote:
>
> Douglas Anderson <dianders@chromium.org> writes:
>
> > Some SoCs with a dwc2 USB controller may need to keep the PHY on to
> > support remote wakeup.  Allow specifying this as a device tree
> > property.
> >
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > ---
> > For relevant prior discussion on this patch, see:
> >
> > https://lkml.kernel.org/r/1435017144-2971-3-git-send-email-dianders@chromium.org
> >
> > I didn't make any changes from the prior version since I never found
> > out what Rob thought of my previous arguments.  If folks want a
> > change, perhaps they could choose from these options:
> >
> > 1. Assume that all dwc2 hosts would like to keep their PHY on for
> >    suspend if there's a USB wakeup enabled, thus we totally drop this
> >    binding.  This doesn't seem super great to me since I'd bet that
> >    many devices that use dwc2 weren't designed for USB wakeup (they
> >    may not keep enough clocks or rails on) so we might be wasting
> >    power for nothing.
> > 2. Rename this property to "snps,wakeup-from-suspend-with-phy" to make
> >    it more obvious that this property is intended both to document
> >    that wakeup from suspend is possible and that we need the PHY for
> >    said wakeup.
> > 3. Rename this property to "snps,can-wakeup-from-suspend" and assume
> >    it's implicit that if we can wakeup from suspend that we need to
> >    keep the PHY on.  If/when someone shows that a device exists using
> >    dwc2 where we can wakeup from suspend without the PHY they can add
> >    a new property.
> >
> > Changes in v2: None
> >
> >  Documentation/devicetree/bindings/usb/dwc2.txt | 3 +++
> >  1 file changed, 3 insertions(+)
>
> checking file Documentation/devicetree/bindings/usb/dwc2.txt
> Hunk #1 FAILED at 37.
> Hunk #2 succeeded at 52 (offset -1 lines).
> 1 out of 2 hunks FAILED

Can you try applying this and the next two patches again?  ...or let
me know that you'd like me to repost?

Thanks!

-Doug
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index f70f3aee4bfc..1c5e29d23c51 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -37,6 +37,8 @@  Refer to phy/phy-bindings.txt for generic phy consumer properties
 - g-rx-fifo-size: size of rx fifo size in gadget mode.
 - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
 - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+- snps,need-phy-for-wake: If present indicates that the phy needs to be left
+                          on for remote wakeup during suspend.
 - snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
                           we detect a wakeup.  This is due to a hardware errata.
 
@@ -53,4 +55,5 @@  Example:
 		clock-names = "otg";
 		phys = <&usbphy>;
 		phy-names = "usb2-phy";
+		snps,need-phy-for-wake;
         };