diff mbox series

[v2,1/2] arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1

Message ID 20190418135232.9368-1-jagan@amarulasolutions.com (mailing list archive)
State Mainlined, archived
Commit f7056b28b7b5b17a732f9928ef7019bcd617a331
Headers show
Series [v2,1/2] arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1 | expand

Commit Message

Jagan Teki April 18, 2019, 1:52 p.m. UTC 
Some camera modules have the SoC feeding a master clock to the sensor
instead of having a standalone crystal. This clock signal is generated
from the clock control unit and output from the CSI MCLK function of
pin PE1.

Add a pinmux setting for it for camera sensors to reference.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- add /omit-if-no-ref/
- add pin name as csi-mclk-pin instead of csi-mclk 

 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 728f70018c51..8c5b521e6389 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -595,6 +595,12 @@ 
 				function = "csi";
 			};
 
+			/omit-if-no-ref/
+			csi_mclk_pin: csi-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
 			i2c0_pins: i2c0-pins {
 				pins = "PH0", "PH1";
 				function = "i2c0";